scholarly journals Folding Angle Regulation by Curved Crease Design for Self-Assembling Origami Propellers

2015 ◽  
Vol 7 (2) ◽  
Author(s):  
Shuhei Miyashita ◽  
Isabella DiDio ◽  
Ishwarya Ananthabhotla ◽  
Byoungkwon An ◽  
Cynthia Sung ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Three Dimensional ◽  
Layered Materials ◽  
The Self ◽  
Proof Of Concept ◽  
Folding Process ◽  
Folding Angle ◽  
Curved Structures ◽  
Self Assembling ◽  
Uniform Heat

This paper describes a method for manufacturing complex three-dimensional curved structures by self-folding layered materials. Our main focus is to first show that the material can cope with curved crease self-folding and then to utilize the curvature to predict the folding angles. The self-folding process employs uniform heat to induce self-folding of the material and shows the successful generation of several types of propellers as a proof of concept. We further show the resulting device is functional by demonstrating its levitation in the presence of a magnetic field applied remotely.

scholarly journals Three-Dimensional MHD Modeling of Interplanetary Solar Wind Using Self-Consistent Boundary Condition Obtained from Multiple Observations and Machine Learning

Universe ◽  
2021 ◽  
Vol 7 (10) ◽  
pp. 371
Author(s):  
Yi Yang ◽  
Fang Shen
Keyword(s):  
Magnetic Field ◽  
Machine Learning ◽  
Boundary Condition ◽  
Solar Wind ◽  
Three Dimensional ◽  
The Self ◽  
Multiple Observations ◽  
Self Consistent ◽  
Mhd Modeling ◽  
The Magnetic Field

Three-dimensional (3-d) magnetohydrodynamics (MHD) modeling is a key method for studying the interplanetary solar wind. In this paper, we introduce a new 3-d MHD solar wind model driven by the self-consistent boundary condition obtained from multiple observations and the Artificial Neural Network (ANN) machine learning technique. At the inner boundary, the magnetic field is derived using the magnetogram and potential field source surface extrapolation; the electron density is derived from the polarized brightness (pB) observations, the velocity can be deduced by an ANN using both the magnetogram and pB observations, and the temperature is derived from the magnetic field and electron density by a self-consistent method. Then, the 3-d interplanetary solar wind from CR2057 to CR2062 is modeled by the new model with the self-consistent boundary conditions. The modeling results present various observational characteristics at different latitudes, and are in better agreement with both the OMNI and Ulysses observations compared to our previous MHD model based only on photospheric magnetic field observations.

Nanoscale Self-Assembly Using Ion and Electron Beam Techniques: A Rapid Review

MRS Advances ◽  
2020 ◽  
Vol 5 (64) ◽  
pp. 3507-3520
Author(s):  
Chunhui Dai ◽  
Kriti Agarwal ◽  
Jeong-Hyun Cho
Keyword(s):  
Electron Beam ◽  
Self Assembly ◽  
Ion Beam ◽  
Three Dimensional ◽  
The Self ◽  
Stress Generation ◽  
Rapid Review ◽  
High Yield ◽  
3D Nanostructures ◽  
Self Assembled

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.

Simulating Self-Regeneration and Self-Replication Processes Using Movable Cellular Automata with a Mutual Equilibrium Neighborhood

2020 ◽  
Vol 29 (4) ◽  
pp. 741-757
Author(s):  
Kateryna Hazdiuk ◽  
◽  
Volodymyr Zhikharevich ◽  
Serhiy Ostapov ◽  
◽  
...  
Keyword(s):  
Cellular Automata ◽  
Cellular Automaton ◽  
Three Dimensional ◽  
Computer Models ◽  
The Self ◽  
Model Construction ◽  
Natural Phenomena ◽  
Different Types ◽  
Movable Cellular Automata ◽  
Self Replication

This paper deals with the issue of model construction of the self-regeneration and self-replication processes using movable cellular automata (MCAs). The rules of cellular automaton (CA) interactions are found according to the concept of equilibrium neighborhood. The method is implemented by establishing these rules between different types of cellular automata (CAs). Several models for two- and three-dimensional cases are described, which depict both stable and unstable structures. As a result, computer models imitating such natural phenomena as self-replication and self-regeneration are obtained and graphically presented.

Directive Effect of Chain Length in Modulating Peptide Nano-assemblies

2020 ◽  
Vol 27 (9) ◽  
pp. 923-929
Author(s):  
Gaurav Pandey ◽  
Prem Prakash Das ◽  
Vibin Ramakrishnan
Keyword(s):  
Electron Microscopy ◽  
Amino Acids ◽  
Light Scattering ◽  
Chain Length ◽  
Self Assembly ◽  
The Self ◽  
Ionic Charge ◽  
Self Assembling ◽  
Biophysical Techniques

Background: RADA-4 (Ac-RADARADARADARADA-NH2) is the most extensively studied and marketed self-assembling peptide, forming hydrogel, used to create defined threedimensional microenvironments for cell culture applications. Objectives: In this work, we use various biophysical techniques to investigate the length dependency of RADA aggregation and assembly. Methods: We synthesized a series of RADA-N peptides, N ranging from 1 to 4, resulting in four peptides having 4, 8, 12, and 16 amino acids in their sequence. Through a combination of various biophysical methods including thioflavin T fluorescence assay, static right angle light scattering assay, Dynamic Light Scattering (DLS), electron microscopy, CD, and IR spectroscopy, we have examined the role of chain-length on the self-assembly of RADA peptide. Results: Our observations show that the aggregation of ionic, charge-complementary RADA motifcontaining peptides is length-dependent, with N less than 3 are not forming spontaneous selfassemblies. Conclusion: The six biophysical experiments discussed in this paper validate the significance of chain-length on the epitaxial growth of RADA peptide self-assembly.

A Solvent-Dependent and Electrochemically Controlled Self-Assembling/Disassembling System

2003 ◽  
Vol 68 (9) ◽  
pp. 1647-1662 ◽  
Author(s):  
Valeria Amendola ◽  
Massimo Boiocchi ◽  
Yuri Diaz Fernandez ◽  
Carlo Mangano ◽  
Piersandro Pallavicini
Keyword(s):  
Equilibrium Mixture ◽  
Bidentate Ligand ◽  
Molecular Structures ◽  
The Self ◽  
Molar Ratio ◽  
Crystal And Molecular Structures ◽  
Self Assembling ◽  
Irreversible Oxidation ◽  
Irreversible Reduction ◽  
Metal Ligand

The bis-bidentate ligand R,S-1,2-diphenyl-N,N'-bis(2-quinolinemethylidene)ethane-1,2-diamine (ligand 4), containing two (iminomethyl)quinoline moieties separated by a cis-1,2-diphenylethylene spacer, forms stable complexes with both CuI and CuII. With CuII, the monomeric 1:1 complex [CuII(4)]2+ is obtained both in CH3CN and CH2Cl2. With CuI and overall 1:1 metal/ligand molar ratio, an equilibrium mixture is obtained in CH3CN, consisting of [CuI(4)2]+, [CuI2(4)2]2+ and [CuI2(4)(CH3CN)4]2+. The preponderant species is the two-metal one-ligand "open" complex [CuI2(4)(CH3CN)4]2+, in which each Cu+ cation is coordinated in a tetrahedral fashion by one (iminomethyl)quinoline unit and by two CH3CN molecules. Precipitation from the equilibrium mixture yields only crystals of [CuI2(4)(CH3CN)4](ClO4)2·2CH3CN, whose crystal and molecular structures have been determined. On the other hand, in the poorly coordinating CH2Cl2 solvent, only the dimeric helical [CuI2(4)2]2+ complex is obtained, when the overall metal/ligand 1:1 molar ratio is chosen. Addition of large quantities of acetonitrile to solutions of [CuI2(4)2]2+ in dichlorometane results in the formation of [CuI2(4)(CH3CN)4]2+, i.e. in the solvent-driven disassembling of the CuI helicate. While electrochemistry in CH3CN is poorly defined due to the presence of more than one CuI species, cyclic voltammetry experiments carried out in CH2Cl2 revealed a well defined behavior, with irreversible oxidation of [CuI2(4)2]2+ and irreversible reduction of [CuII(4)]2+ taking place at separate potentials (∆E ≈ 700 mV). Irreversibility and separation of the redox events are due to the self-assembling and disassembling processes following the reduction and oxidation, respectively.

Self-assembling behaviour of a modified aromatic amino acid in competitive medium

Soft Matter ◽  
2020 ◽  
Vol 16 (28) ◽  
pp. 6599-6607 ◽  
Author(s):  
Pijush Singh ◽  
Souvik Misra ◽  
Nayim Sepay ◽  
Sanjoy Mondal ◽  
Debes Ray ◽  
...  
Keyword(s):  
Amino Acid ◽  
Self Assembly ◽  
Aromatic Amino Acid ◽  
Photophysical Properties ◽  
Solvent Mixture ◽  
The Self ◽  
Solvent Ratio ◽  
Self Assembling

The self-assembly and photophysical properties of 4-nitrophenylalanine (4NP) are changed with the alteration of solvent and final self-assembly state of 4NP in competitive solvent mixture and are dictated by the solvent ratio.

scholarly journals Detecting the Mechanism behind the Transition from Fixed Two-Dimensional Patterned Sika Deer (Cervus nippon) Dermal Papilla Cells to Three-Dimensional Pattern

2021 ◽  
Vol 22 (9) ◽  
pp. 4715
Author(s):  
Guanning Wei ◽  
Hongmei Sun ◽  
Haijun Wei ◽  
Tao Qin ◽  
Yifeng Yang ◽  
...  
Keyword(s):  
Culture Condition ◽  
Sika Deer ◽  
Three Dimensional ◽  
Cervus Nippon ◽  
Dermal Papilla ◽  
Growth Patterns ◽  
The Self ◽  
Dermal Papilla Cells ◽  
Aggregative Behavior ◽  
Cell Pattern

The hair follicle dermal papilla is critical for hair generation and de novo regeneration. When cultured in vitro, dermal papilla cells from different species demonstrate two distinguishable growth patterns under the conventional culture condition: a self-aggregative three dimensional spheroidal (3D) cell pattern and a two dimensional (2D) monolayer cell pattern, correlating with different hair inducing properties. Whether the loss of self-aggregative behavior relates to species-specific differences or the improper culture condition remains unclear. Can the fixed 2D patterned dermal papilla cells recover the self-aggregative behavior and 3D pattern also remains undetected. Here, we successfully constructed the two growth patterns using sika deer (Cervus nippon) dermal papilla cells and proved it was the culture condition that determined the dermal papilla growth pattern. The two growth patterns could transit mutually as the culture condition was exchanged. The fixed 2D patterned sika deer dermal papilla cells could recover the self-aggregative behavior and transit back to 3D pattern, accompanied by the restoration of hair inducing capability when the culture condition was changed. In addition, the global gene expressions during the transition from 2D pattern to 3D pattern were compared to detect the potential regulating genes and pathways involved in the recovery of 3D pattern and hair inducing capability.

Sign in / Sign up

Export Citation Format

Share Document