Semi-Analytical Approach in Buckling Analysis of Functionally Graded Shells of Revolution Subjected to Displacement Dependent Pressure

2017 ◽  
Vol 139 (6) ◽  
Author(s):  
Majid Khayat ◽  
Davood Poorveis ◽  
Shapour Moradi
Keyword(s):  
Power Law ◽  
Stiffness Matrix ◽  
Lateral Pressure ◽  
Volume Fraction ◽  
Numerical Study ◽  
Middle Surface ◽  
Reduction Factor ◽  
Buckling Analysis ◽  
Functionally Graded ◽  
Shells Of Revolution

Linearized buckling analysis of functionally graded shells of revolution subjected to displacement-dependent pressure, which remains normal to the shell's middle surface throughout the deformation process, is described in this work. Material properties are assumed to be varied continuously in the thickness direction according to a simple power law distribution in terms of the volume fraction of a ceramic and a metal. The governing equations are derived based on the first-order shear deformation theory, which accounts for through the thickness shear flexibility with Sanders type of kinematic nonlinearity. Displacements and rotations in the shell's middle surface are approximated by combining polynomial functions in the meridian direction and truncated Fourier series with an appropriate number of harmonic terms in the circumferential direction. The load stiffness matrix, also known as the pressure stiffness matrix, which accounts for the variation of load direction, is derived for each strip and after assembling resulted in the global load stiffness matrix of the shell, which may be unsymmetric. The load stiffness matrix can be divided into two unsymmetric parts (i.e., load nonuniformity and unconstrained boundary effects) and a symmetric part. The main part of this research is to quantify the effects of these unsymmetries on the follower action of lateral pressure. A detailed numerical study is carried out to assess the influence of various parameters such as power law index of functionally graded material (FGM) and shell geometry interaction with load distribution, and shell boundary conditions on the follower buckling pressure reduction factor. The results indicate that, when applied individually, unconstrained boundary effect and longitudinal nonuniformity of lateral pressure have little effect on the follower buckling reduction factor, but when combined with each other and with circumferentially loading nonuniformity, intensify this effect.

Exact solution by dynamic stiffness method for the natural vibration of porous functionally graded plate considering neutral surface

2021 ◽  
pp. 146442072098817
Author(s):  
Md. Imran Ali ◽  
Mohammad Sikandar Azam
Keyword(s):  
Power Law ◽  
Functionally Graded Material ◽  
Stiffness Matrix ◽  
Natural Vibration ◽  
Dynamic Stiffness ◽  
Functionally Graded ◽  
Neutral Surface ◽  
Functionally Graded Plate ◽  
Dynamic Stiffness Matrix ◽  
Graded Material

This paper presents the formulation of dynamic stiffness matrix for the natural vibration analysis of porous power-law functionally graded Levy-type plate. In the process of formulating the dynamic stiffness matrix, Kirchhoff-Love plate theory in tandem with the notion of neutral surface has been taken on board. The developed dynamic stiffness matrix, a transcendental function of frequency, has been solved through the Wittrick–Williams algorithm. Hamilton’s principle is used to obtain the equation of motion and associated natural boundary conditions of porous power-law functionally graded plate. The variation across the thickness of the functionally graded plate’s material properties follows the power-law function. During the fabrication process, the microvoids and pores develop in functionally graded material plates. Three types of porosity distributions are considered in this article: even, uneven, and logarithmic. The eigenvalues computed by the dynamic stiffness matrix using Wittrick–Williams algorithm for isotropic, power-law functionally graded, and porous power-law functionally graded plate are juxtaposed with previously referred results, and good agreement is found. The significance of various parameters of plate vis-à-vis aspect ratio ( L/b), boundary conditions, volume fraction index ( p), porosity parameter ( e), and porosity distribution on the eigenvalues of the porous power-law functionally graded plate is examined. The effect of material density ratio and Young’s modulus ratio on the natural vibration of porous power-law functionally graded plate is also explained in this article. The results also prove that the method provided in the present work is highly accurate and computationally efficient and could be confidently used as a reference for further study of porous functionally graded material plate.

scholarly journals Dynamics of axially functionally graded conical pipes conveying fluid

2021 ◽  
Vol 37 ◽  
pp. 318-326
Author(s):  
Yuzhen Zhao ◽  
Dike Hu ◽  
Song Wu ◽  
Xinjun Long ◽  
Yongshou Liu
Keyword(s):  
Natural Frequency ◽  
Critical Velocity ◽  
Volume Fraction ◽  
Differential Quadrature Method ◽  
Reduction Factor ◽  
Functionally Graded ◽  
Function Type ◽  
Pipes Conveying Fluid ◽  
Volume Fraction Function ◽  
Conveying Fluid

Abstract In this paper, the dynamics of axially functionally graded (AFG) conical pipes conveying fluid are analyzed. The materials are distributed along the conical pipe axis as a volume fraction function. Either the elastic modulus or the density of the AFG conical pipe is assumed to vary from the inlet to the outlet. The governing equation of the AFG conical pipe is derived using the Hamiltonian principle and solved by the differential quadrature method. The effects of the volume fraction index, volume fraction function type and reduction factor on the natural frequency and critical velocity are analyzed. It is found that for a power function volume fraction type, the natural frequency and critical velocity increase with increasing volume fraction index and clearly increase when the volume fraction index is within the range (0, 10). For an exponential function volume fraction type, the natural frequency and critical velocity change rapidly within the range (−10, 10), besides the above range the relationship between the natural frequency, critical velocity and volume fraction index is approximate of little change. The natural frequency and critical velocity decrease linearly with increasing reduction factor.

scholarly journals Optimum response of functionally graded piezoelectric plates in thermal environments

2017 ◽  
Vol 35 (3) ◽  
pp. 606-617 ◽  
Author(s):  
Hossein Nourmohammadi ◽  
Bashir Behjat
Keyword(s):  
Power Law ◽  
Thermal Loading ◽  
Volume Fraction ◽  
Plate Theory ◽  
Poisson Ratio ◽  
Functionally Graded ◽  
Sensors And Actuators ◽  
Thermal Environments ◽  
Functionally Graded Piezoelectric ◽  
Power Law Index

AbstractIn this article, the static response of the functionally graded piezoelectric (FGP) plates with piezoelectric layers (sandwich FGPM) is studied based on the first order shear deformation plate theory. The plate is under mechanical, electrical and thermal loadings and finite element method is employed to obtain the solution of the equation. All mechanical, thermal and piezoelectric properties, except Poisson ratio, obey the power law distribution through the thickness. By solving the governing equation, optimum value of power law index is investigated in each type of loading. The effects of different volume fraction index, layer arrangements, various boundary conditions and different loading types, are studied on the deflection of FGPM plate. It is inferred that, the correlations between the deflection, power law index and layer arrangement are completely different in the mechanical and thermal loading and the optimum value of the power law index should be selected in each case separately. This optimum values can be used as a design criterion to build a reliable sensors and actuators in thermal environments.

A Comprehensive Analysis on the Structural–Acoustic Aspects of Various Functionally Graded Plates

2015 ◽  
Vol 07 (05) ◽  
pp. 1550072 ◽  
Author(s):  
N. Chandra ◽  
S. Raja ◽  
K. V. N. Gopal
Keyword(s):  
Power Law ◽  
Volume Fraction ◽  
Transmission Loss ◽  
Sound Radiation ◽  
Functionally Graded ◽  
Radiation Efficiency ◽  
Sound Power ◽  
Acoustic Behavior ◽  
Acoustic Response ◽  
Plate Velocity

The vibration, sound radiation and transmission characteristics of plates with various functionally graded materials (FGM) are explored and a detailed investigation is presented on the influence of specific material properties on structural–acoustic behavior. An improved model based on a simplified first order shear deformation theory along with a near-field elemental radiator approach is used to predict the radiated acoustic field associated with a given vibration and acoustic excitation. Various ceramic materials suitable for engineering applications are considered with aluminum as the base metal. A power law is used for the volume fraction distribution of the two constitutive materials and the effective modulus is obtained using the Mori–Tanaka homogenization scheme. The structural–acoustic response of these FGM plates is presented in terms of the plate velocity, radiated sound power, sound radiation efficiency for point and uniformly distributed load cases. Increase in both vibration and acoustic response with increase in power law index is observed for the lower order modes. The vibro–acoustic metrics such as root-mean-squared plate velocity, overall sound power, frequency averaged radiation efficiency and transmission loss, are used to rank these materials for vibro–acoustically efficient combination. Detailed analysis has been made on the factors influencing the structural–acoustic behavior of various FGM plates and relative ranking of particular ceramic/metal combinations.

scholarly journals Free Vibration Analysis of a Thermally Loaded Porous Functionally Graded Rotor–Bearing System

2020 ◽  
Vol 10 (22) ◽  
pp. 8197
Author(s):  
Prabhakar Sathujoda ◽  
Aneesh Batchu ◽  
Bharath Obalareddy ◽  
Giacomo Canale ◽  
Angelo Maligno ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Power Law ◽  
Inner Core ◽  
Volume Fraction ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Linear Temperature ◽  
Volume Fractions ◽  
Rotor Bearing ◽  
Bearing System

The present work deals with natural and whirl frequency analysis of a porous functionally graded (FG) rotor–bearing system using the finite element method (FEM). Stiffness, mass and gyroscopic matrices are derived for porous and non-porous FG shafts by developing a novel two-noded porous FG shaft element using Timoshenko beam theory (TBT), considering the effects of translational inertia, rotatory inertia, gyroscopic moments and shear deformation. A functionally graded shaft whose inner core is comprised of stainless steel (SS) and an outer layer made of ceramic (ZrO2) is considered. The effects of porosity on the volume fractions and the material properties are modelled using a porosity index. The non-linear temperature distribution (NLTD) method based on the Fourier law of heat conduction is used for the temperature distribution in the radial direction. The natural and whirl frequencies of the porous and non-porous FG rotor systems have been computed for different power law indices, volume fractions of porosity and thermal gradients to investigate the influence of porosity on fundamental frequencies. It has been found that the power law index, volume fraction of porosity and thermal gradient have a significant influence on the natural and whirl frequencies of the FG rotor–bearing system.

scholarly journals Buckling Temperature and Natural Frequencies of Thick Porous Functionally Graded Beams Resting on Elastic Foundation in a Thermal Environment

2019 ◽  
Vol 2019 ◽  
pp. 1-17 ◽  
Author(s):  
Zakaria Ibnorachid ◽  
Lhoucine Boutahar ◽  
Khalid EL Bikri ◽  
Rhali Benamar
Keyword(s):  
Shear Deformation ◽  
Elastic Foundation ◽  
Power Law ◽  
Natural Frequencies ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Slenderness Ratio ◽  
Higher Order ◽  
Functionally Graded ◽  
Transverse Displacement

In this paper, free vibrations of Porous Functionally Graded Beams (P-FGBs), resting on two-parameter elastic foundations, and exposed to three forms of thermal field, uniform, linear, and sinusoidal, are studied using a Refined Higher-order shear Deformation Theory. The present theory accounts for shear deformation by considering a constant transverse displacement and a higher-order variation of the axial displacement through the thickness of the beam. The stress-free boundary conditions are satisfied on the upper and lower surfaces of the beam without using any shear correction factor. The material properties are temperature-dependent and vary continuously through the depth direction of the beam, based on a modified power-law rule, in which two kinds of porosity distributions, uniform, and nonuniform, through the cross-section area of the beam, are considered. Hamilton’s principle is applied to obtain governing equations of motion, which are solved using a Navier-type analytical solution for simply supported P-FGB. Numerical examples are proposed and discussed in detail, to prove the effect of the thermal environment, the porosity distribution, and the influence of several parameters such as the power-law index, porosity volume fraction, slenderness ratio, and elastic foundation parameters on the critical buckling temperatures and the natural frequencies of the P-FGB.

Free Vibration and Buckling Analysis of Functionally Graded Plates Resting on Elastic Foundation Using Higher Order Theory

2018 ◽  
Vol 18 (04) ◽  
pp. 1850049 ◽  
Author(s):  
Smita Parida ◽  
Sukesh Chandra Mohanty
Keyword(s):  
Free Vibration ◽  
Shear Deformation ◽  
Elastic Foundation ◽  
Volume Fraction ◽  
Plate Theory ◽  
Higher Order ◽  
Buckling Analysis ◽  
Functionally Graded ◽  
Transverse Displacement ◽  
Pasternak Elastic Foundation

This paper deals with the free vibration and buckling analysis of functionally graded material (FGM) plates, resting on the Winkler–Pasternak elastic foundation. The higher order shear deformation plate theory (HSPT) is adopted for the realistic variation of transverse displacement through the thickness, using the power law distribution to describe the variation of the material properties. Both the effects of shear deformation and rotary inertia are considered. In the present model, the plate is discretised into [Formula: see text] eight noded serendipity quadratic elements with seven nodal degrees of freedom (DOFs). The validation study is carried out by comparing the calculated values with those given in the literature. The effects of various parameters like the Winkler and Pasternak modulus coefficients, volume fraction index, aspect ratio, thickness ratio and different boundary conditions on the behaviour of the FGM plates are studied.

Buckling Analysis of Multilayered Functionally Graded Composite Cylindrical Shells

2011 ◽  
Vol 108 ◽  
pp. 74-79
Author(s):  
Mohammad Hossein Kargarnovin ◽  
Mehdi Hashemi
Keyword(s):  
Finite Element ◽  
Cylindrical Shell ◽  
Shape Function ◽  
Volume Fraction ◽  
Buckling Analysis ◽  
Functionally Graded ◽  
Buckling Load ◽  
Composite Cylindrical Shell ◽  
Functionally Graded Composite ◽  
Axial Buckling

In this paper, the buckling analysis of a multilayered composite cylindrical shell which volume fraction of its fiber varies according to power law in longitudinal direction, due to applied compressive axial load is studied. Rule of mixture model and reverse of that are employed to represent elastic properties of this fiber reinforced functionally graded composite. Strain displacement relations employed are based on Reissner-Naghdi-Berry’s shell theory. The displacement finite element model of the equilibrium equations is derived by employing weak form formulation. The Lagrangian shape function for in-plane displacements and Hermitian shape function for displacement in normal direction to the surface of mid-plane are used. Then, finite element code is written in MATLAB based on stated method to obtain the critical axial buckling load. Numerical results show that despite having the same layout and average volume fraction of fibers, the critical axial buckling load of functionally graded composite cylindrical shell is more than that of traditional composite in which the volume fraction of its fiber is constant throughout the shell.

BI-STABLE ANALYSES OF LAMINATED FGM SHELLS

2012 ◽  
Vol 12 (02) ◽  
pp. 311-335 ◽  
Author(s):  
X. Q. HE ◽  
L. LI ◽  
S. KITIPORNCHAI ◽  
C. M. WANG ◽  
H. P. ZHU
Keyword(s):  
Power Law ◽  
Functionally Graded Material ◽  
Volume Fraction ◽  
Functionally Graded ◽  
Optimum Combination ◽  
Thickness Direction ◽  
Power Law Distribution ◽  
Deployable Structures ◽  
Graded Material ◽  
Two Parameter

Based on an inextensional two-parameter analytical model for cylindrical shells, bi-stable analyses were carried out on laminated functionally graded material (FGM) shells with various layups of fibers. Properties of FGM shells are functionally graded in the thickness direction according to a volume fraction power law distribution. The effects of constituent volume fractions of FGM matrix are examined on the curvature and twist of laminated FGM shells. The results reveal that the optimum combination of constituents of FGM matrix can be obtained for the maximum twist of FGM shells with antisymmetric layups, which helps the design of deployable structures. The effects of Young's modulus of fibers and the symmetry of layups on bi-stable behaviors are also discussed in detail.

Characteristics of Power Law and Sigmoid FGMs Models in Thermal Effect

2016 ◽  
Vol 829 ◽  
pp. 90-94
Author(s):  
Seok Hyeon Kang ◽  
Ji Hwan Kim
Keyword(s):  
Power Law ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Virtual Work ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Temperature Dependent ◽  
Graded Materials ◽  
Virtual Work Principle ◽  
Temperature Dependent Properties

In thermal environment, vibration behavior of Functionally Graded Materials (FGMs) plates is investigated, and the materials are developed with mixing ceramic and metal. Present study is based on the first-order shear deformation theory of plate. Then, mixture methods such as Power law (P-) and Sigmoid (S-) models are chosen. According to a volume fraction, the material properties are assumed to vary continuously through the thickness direction and to be temperature dependent properties. Further, thermal effects are considered as uniform temperature rise and one dimensional heat transfer. For the structure analysis, FEM is used to obtain the natural frequencies based on the virtual work principle.

Sign in / Sign up

Export Citation Format

Share Document