Droplet Formation and Fission in Shear-Thinning/Newtonian Multiphase System Using Bilayer Bifurcating Microchannel

2017 ◽  
Vol 140 (1) ◽  
Author(s):  
Yong Ren ◽  
Kai Seng Koh ◽  
Jit Kai Chin ◽  
Jing Wang ◽  
Conghua Wen ◽  
...  
Keyword(s):  
Shear Thinning ◽  
Droplet Formation ◽  
Newtonian Fluids ◽  
Model Systems ◽  
Multiphase System ◽  
Blood Capillaries ◽  
Two Systems ◽  
Flow Through ◽  
Newtonian System ◽  
Droplet Fission

With a novel platform of bilayer polydimethylsiloxane microchannel formed by bifurcating junction, we aim to investigate droplet formation and fission in a multiphase system with complex three-dimensional (3D) structure and understand the variations in mechanism associated with droplet formation and fission in the microstructure between shear-thinning/Newtonian system versus Newtonian/Newtonian system. The investigation concentrates on shear-thinning fluid because it is one of the most ubiquitous rheological properties of non-Newtonian fluids. Sodium carboxymethyl cellulose (CMC) solution and silicone oil have been used as model fluids and numerical model has been established to characterize the shear-thinning effect in formation of CMC-in-oil emulsions, as well as breakup dynamics when droplets flow through 3D bifurcating junction. The droplet volume and generation rate have been compared between two systems at the same Weber number and capillary number. Variation in droplet fission has been found between two systems, demonstrating that the shear-thinning property and confining geometric boundaries significantly affect the deformation and breakup of each mother droplet into two daughter droplets at bifurcating junction. The understanding of the droplet fission in the novel microstructure will enable more versatile control over the emulsion formation and fission when non-Newtonian fluids are involved. The model systems in the study can be further developed to investigate the mechanical property of emulsion templated particles such as drug encapsulated microcapsules when they flow through complex media structures, such as blood capillaries or the porous tissue structure, which feature with bifurcating junction.

Droplet Fission in Non-Newtonian Multiphase System Using Bilayer Bifurcated Microchannel

2016 ◽  
Author(s):  
Yong Ren ◽  
Kai Seng Koh
Keyword(s):  
Lower Layer ◽  
Shear Thickening ◽  
Industrial Applications ◽  
Newtonian Fluids ◽  
Model Systems ◽  
Multiphase System ◽  
Material Synthesis ◽  
Blood Capillaries ◽  
Pdms Microchannel ◽  
Droplet Fission

In this paper, we present a novel design of bilayer polydimethylsiloxane (PDMS) microchannel formed by bifurcated junction, from which each curved branch lies on the upper and lower layer, respectively. With this 3D platform, we aim to investigate droplet formation and subsequent fission in a multiphase system using non-Newtonian fluids, which are ubiquitous in daily life and have been widely used in industrial applications including biomedical engineering, food production, personal care and cosmetics, and material synthesis. Numerical model has been established to characterize the non-Newtonian effect to droplet fission and associated breakup dynamics when droplet flows through 3D bifurcated junction, where droplets can deform significantly on account of the confining geometric boundaries, and the flow of the surrounding non-Newtonian liquid, both of which control the deformation and breakup of each mother droplet into two daughter droplets. Dispersions of sodium carboxymethyl cellulose in water, and dispersions of polyvinylchloride in dioctylphthalate have been used as model fluids in the study, with the former one possessing shear-thinning behaviour, while the latter one possessing shear-thickening behaviour. The understanding of the droplet fission in the novel microstructure will enable more versatile control over the emulsion formation when non-Newtonian fluids are involved. The model systems in the study can be further developed to investigate the mechanical property of emulsion templated particles such as drug encapsulated microcapsules when they flow through complex media structures, such as blood capillaries or the porous tissue structure, which feature with bifurcated junction.

scholarly journals Flow of Non-Newtonian Fluids in a Single-Cavity Microchannel

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 836
Author(s):  
Mahmud Kamal Raihan ◽  
Purva P. Jagdale ◽  
Sen Wu ◽  
Xingchen Shao ◽  
Joshua B. Bostwick ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Groundwater Remediation ◽  
Shear Thinning ◽  
Newtonian Fluids ◽  
Fluid Inertia ◽  
Fluid Elasticity ◽  
Wide Range ◽  
Primary Direction ◽  
Flow Through ◽  
Single Cavity

Having a basic understanding of non-Newtonian fluid flow through porous media, which usually consist of series of expansions and contractions, is of importance for enhanced oil recovery, groundwater remediation, microfluidic particle manipulation, etc. The flow in contraction and/or expansion microchannel is unbounded in the primary direction and has been widely studied before. In contrast, there has been very little work on the understanding of such flow in an expansion–contraction microchannel with a confined cavity. We investigate the flow of five types of non-Newtonian fluids with distinct rheological properties and water through a planar single-cavity microchannel. All fluids are tested in a similarly wide range of flow rates, from which the observed flow regimes and vortex development are summarized in the same dimensionless parameter spaces for a unified understanding of the effects of fluid inertia, shear thinning, and elasticity as well as confinement. Our results indicate that fluid inertia is responsible for developing vortices in the expansion flow, which is trivially affected by the confinement. Fluid shear thinning causes flow separations on the contraction walls, and the interplay between the effects of shear thinning and inertia is dictated by the confinement. Fluid elasticity introduces instability and asymmetry to the contraction flow of polymers with long chains while suppressing the fluid inertia-induced expansion flow vortices. However, the formation and fluctuation of such elasto-inertial fluid vortices exhibit strong digressions from the unconfined flow pattern in a contraction–expansion microchannel of similar dimensions.

Heat and mass transfer effects on MHD non-Newtonian fluids flow through an inclined thermally-stratified porous medium

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Gladys Tharapatla ◽  
Pamula Rajakumari ◽  
Ramana G.V. Reddy
Keyword(s):  
Mass Transfer ◽  
Porous Medium ◽  
Velocity Profile ◽  
Heat And Mass Transfer ◽  
Newtonian Fluids ◽  
Transfer Effects ◽  
Content Type ◽  
Non Linear ◽  
Homotopy Analysis ◽  
Flow Through

Purpose This paper aims to analyze heat and mass transfer of magnetohydrodynamic (MHD) non-Newtonian fluids flow past an inclined thermally stratified porous plate using a numerical approach. Design/methodology/approach The flow equations are set up with the non-linear free convective term, thermal radiation, nanofluids and Soret–Dufour effects. Thus, the non-linear partial differential equations of the flow analysis were simplified by using similarity transformation to obtain non-linear coupled equations. The set of simplified equations are solved by using the spectral homotopy analysis method (SHAM) and the spectral relaxation method (SRM). SHAM uses the approach of Chebyshev pseudospectral alongside the homotopy analysis. The SRM uses the concept of Gauss-Seidel techniques to the linear system of equations. Findings Findings revealed that a large value of the non-linear convective parameters for both temperature and concentration increases the velocity profile. A large value of the Williamson term is detected to elevate the velocity plot, whereas the Casson parameter degenerates the velocity profile. The thermal radiation was found to elevate both velocity and temperature as its value increases. The imposed magnetic field was found to slow down the fluid velocity by originating the Lorentz force. Originality/value The novelty of this paper is to explore the heat and mass transfer effects on MHD non-Newtonian fluids flow through an inclined thermally-stratified porous medium. The model is formulated in an inclined plate and embedded in a thermally-stratified porous medium which to the best of the knowledge has not been explored before in literature. Two elegance spectral numerical techniques have been used in solving the modeled equations. Both SRM and SHAM were found to be accurate.

Formation of droplet of shear‐thinning non‐Newtonian fluids in a step‐emulsification microdevice

AIChE Journal ◽  
2021 ◽  
Author(s):  
Xiyang Liu ◽  
Ziwei Liu ◽  
Shaokun Jiang ◽  
Chunying Zhu ◽  
Youguang Ma ◽  
...  
Keyword(s):  
Shear Thinning ◽  
Newtonian Fluids

Influence of an inclined magnetic field on the Poiseuille flow of immiscible micropolar–Newtonian fluids in a porous medium

2018 ◽  
Vol 96 (9) ◽  
pp. 1016-1028 ◽  
Author(s):  
Pramod Kumar Yadav ◽  
Sneha Jaiswal
Keyword(s):  
Magnetic Field ◽  
Rotational Velocity ◽  
Immiscible Fluids ◽  
Newtonian Fluids ◽  
Porous Channel ◽  
Physical Parameters ◽  
Inclined Magnetic Field ◽  
Two Phase ◽  
Flow Through ◽  
Newtonian Viscous Fluid

The present problem is concerned with two-phase fluid flow through a horizontal porous channel in the presence of uniform inclined magnetic field. The micropolar fluid or Eringen fluid and Newtonian viscous fluid are flowing in the upper and lower regions of the horizontal porous channel, respectively. In this paper, the permeability of each region of the horizontal porous channel has been taken to be different. The effects of various physical parameters like angles of inclination of magnetic field, viscosity ratio, micropolarity parameter, etc., on the velocities, micro-rotational velocity of two immiscible fluids in horizontal porous channel, wall-shear stress, and flow rate have been discussed. The result obtained for immiscible micropolar–Newtonian fluids are compared with the results of two immiscible Newtonian fluids. The obtained result may be used in production of oil from oil reservoirs, purification of contaminated ground water, etc.

Sedimentation of finite-size particles in quiescent wall-bounded shear-thinning and Newtonian fluids

2020 ◽  
Vol 129 ◽  
pp. 103291
Author(s):  
Dhiya Alghalibi ◽  
Walter Fornari ◽  
Marco E. Rosti ◽  
Luca Brandt
Keyword(s):  
Finite Size ◽  
Shear Thinning ◽  
Newtonian Fluids

Modeling of Newtonian droplet formation in power-law non-Newtonian fluids in a flow-focusing device

2020 ◽  
Vol 56 (9) ◽  
pp. 2711-2723
Author(s):  
Qi Chen ◽  
Jingkun Li ◽  
Yu Song ◽  
David M Christopher ◽  
Xuefang Li
Keyword(s):  
Power Law ◽  
Droplet Formation ◽  
Newtonian Fluids ◽  
Flow Focusing

Dispersion of matter in non-Newtonian laminar flow through a circular tube

1966 ◽  
Vol 292 (1429) ◽  
pp. 203-208 ◽  
Keyword(s):  
Laminar Flow ◽  
Newtonian Fluid ◽  
Circular Tube ◽  
Newtonian Fluids ◽  
Parallel Plane ◽  
Bingham Plastic ◽  
Ellis Model ◽  
Model Fluid ◽  
Flow Through

Taylor’s analyses of the dispersion of Newtonian fluids in laminar flow in a circular tube are extended to the flow of the Bingham plastic and Ellis model fluid. The previous results for the Newtonian fluid and power-low fluid can be deduced from the results of this work. It is indicated that Aris’s modification of Taylor’s analyses can be naturally applied to the non-Newtonian fluid. Results obtained for laminar flow between two parallel plane walls are given in the appendix.

Modelling of Laminar Canonical Flows: Revisit

2012 ◽  
Author(s):  
Kofi Freeman K. Adane ◽  
Mark F. Tachie
Keyword(s):  
Three Dimensional ◽  
Shear Thinning ◽  
Secondary Flows ◽  
Newtonian Fluids ◽  
Navier Stokes ◽  
Jet Flows ◽  
Wall Jet ◽  
Navier Stokes Equation ◽  
Incompressible Navier Stokes Equation ◽  
Insight Into

Three-dimensional laminar lid-driven and wall jet flows of various shear-thinning non-Newtonian and Newtonian fluids were numerically investigated. The complete nonlinear incompressible Navier-Stokes equation was solved using a collocated finite-volume based in-house CFD code. From the results, velocity profiles at several locations, jet spread rates, secondary flows and vorticity distributions were used to provide insight into the characteristics of three-dimensional laminar canonical flows of shear-thinning non-Newtonian and Newtonian fluids.

Sign in / Sign up

Export Citation Format

Share Document