Electrochemical Corrosion Finite Element Analysis and Burst Pressure Prediction of Externally Corroded Underground Gas Transmission Pipelines

2017 ◽  
Vol 140 (1) ◽  
Author(s):  
Ibrahim M. Gadala ◽  
Magd Abdel Wahab ◽  
Akram Alfantazi
Keyword(s):  
Finite Element ◽  
Stress Analysis ◽  
Reaction Kinetics ◽  
Moving Boundary ◽  
Electrochemical Corrosion ◽  
Burst Pressure ◽  
Element Analysis ◽  
Corrosion Defect ◽  
Nonlinear Stress ◽  
Pipeline Wall

An integrative numerical simulation approach for pipeline integrity analysis is presented in this work, combining a corrosion model, which is the main focus of this paper, with a complementary structural nonlinear stress analysis, using the finite element method (FEM). Potential distributions in the trapped water existing beneath pipeline coating disbondments are modeled in conjunction with reaction kinetics on the corroding exposed steel surface using a moving boundary mesh. Temperature dependencies (25 °C and 50 °C) of reaction kinetics do not greatly affect final corrosion defect geometries after 3-yr simulation periods. Conversely, cathodic protection (CP) levels and pH dependencies within the near-neutral pH range (6.7–8.5) strongly govern depth profiles caused by corrosion, reaching a maximum of ∼3 mm into the pipeline wall. A 0.25 V amplification of CP potential combined with a 0.5 mm widening in disbondment opening size reduces defect penetration by almost 30%. Resulting corrosion defect geometries are used for stress examinations and burst pressure evaluations. Furthermore, nonlinear elastic–plastic stress analysis is carried out using shell elements in order to predict the burst pressure of corroded pipes. Corrosion is modeled by reducing the stiffness of a damaged element that has the dimensions of the defect. The predicted burst pressures are in good agreement with those obtained using an experimental-based formula.

Nonlinear Stress Modeling Scheme to Analyze Semiconductor Packages Subjected to Combined Thermal and Hygroscopic Loading

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Samson Yoon ◽  
Changsoo Jang ◽  
Bongtae Han
Keyword(s):  
Finite Element ◽  
Stress Analysis ◽  
Moisture Diffusion ◽  
Combined Loading ◽  
Numerical Accuracy ◽  
Element Analysis ◽  
Viscoelastic Composite ◽  
Nonlinear Stress ◽  
Hygroscopic Swelling ◽  
Semiconductor Packages

A nonlinear finite element modeling (FEM) scheme to analyze the combined effect of thermal and hygroscopic deformation is presented. The scheme employs the conventional moisture diffusion, heat transfer, and stress analysis routines available in the commercial FEM package, but offers a unique way of linking the routines to conduct a nonlinear stress analysis of semiconductor packages subjected to moisture as well as temperature excursions. Strategies to implement the proposed scheme using commercial finite element analysis softwares are discussed. The numerical accuracy of the scheme is confirmed with the analytical solution of elastic/viscoelastic composite cylinder subjected to the combined loading of thermal expansion and hygroscopic swelling.

Finite Element Analysis of Complex Corrosion Defects

2002 ◽  
Author(s):  
Duane S. Cronin
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Burst Pressure ◽  
Uniaxial Tensile ◽  
Element Analysis ◽  
Internal Corrosion ◽  
Corrosion Defect ◽  
Elastic Plastic ◽  
Defect Assessment ◽  
Corrosion Defects

Aging gas and oil transmission pipeline infrastructure has led to the need for improved integrity assessment. Presently, external and internal corrosion defects are the leading cause of pipeline failure in Canada, and in many other countries around the world. The currently accepted defect assessment procedures have been shown to be conservative, with the degree of conservatism varying with the defect dimensions. To address this issue, a multi-level corrosion defect assessment procedure has been proposed. The assessment levels are organized in terms of increasing complexity; with three-dimensional elastic-plastic Finite Element Analysis (FEA) proposed as the highest level of assessment. This method requires the true stress-strain curve of the material, as determined from uniaxial tensile tests, and the corrosion defect geometry to assess the burst pressure of corrosion defects. The use of non-linear FEA to predict the failure pressure of real corrosion defects has been investigated using the results from 25 burst tests on pipe sections removed from service due to the presence of corrosion defects. It has been found that elastic-plastic FEA provides an accurate prediction of the burst pressure and failure location of complex-shaped corrosion defects. Although this approach requires detailed information regarding the corrosion geometry, it is appropriate for cases where an accurate burst pressure prediction is necessary.

Cord/Rubber Material Properties

1985 ◽  
Vol 58 (4) ◽  
pp. 830-856 ◽  
Author(s):  
R. J. Cembrola ◽  
T. J. Dudek
Keyword(s):  
Finite Element ◽  
Material Model ◽  
Rubber Composites ◽  
Stress Strain ◽  
Element Analysis ◽  
Rubber Layer ◽  
Strain Behavior ◽  
Nonlinear Stress ◽  
Interlaminar Shear ◽  
Mechanics Of Composite Materials

Abstract Recent developments in nonlinear finite element methods (FEM) and mechanics of composite materials have made it possible to handle complex tire mechanics problems involving large deformations and moderate strains. The development of an accurate material model for cord/rubber composites is a necessary requirement for the application of these powerful finite element programs to practical problems but involves numerous complexities. Difficulties associated with the application of classical lamination theory to cord/rubber composites were reviewed. The complexity of the material characterization of cord/rubber composites by experimental means was also discussed. This complexity arises from the highly anisotropic properties of twisted cords and the nonlinear stress—strain behavior of the laminates. Micromechanics theories, which have been successfully applied to hard composites (i.e., graphite—epoxy) have been shown to be inadequate in predicting some of the properties of the calendered fabric ply material from the properties of the cord and rubber. Finite element models which include an interply rubber layer to account for the interlaminar shear have been shown to give a better representation of cord/rubber laminate behavior in tension and bending. The application of finite element analysis to more refined models of complex structures like tires, however, requires the development of a more realistic material model which would account for the nonlinear stress—strain properties of cord/rubber composites.

Finite Element Analysis of Drum on the New Type Self-Driven Towing Machine for Cable

2011 ◽  
Vol 55-57 ◽  
pp. 664-669
Author(s):  
Jin Ning Nie ◽  
Hui Wang ◽  
De Feng Xie
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Analysis ◽  
Compressive Stress ◽  
Wire Rope ◽  
Ansys Software ◽  
Element Analysis ◽  
Structure Improvement ◽  
Improvement Measures ◽  
New Type

According to the situation that the dual-friction drums on the new type towing machine lack stress analysis when designed, the safety is difficult to test and verify. The pull of wire rope in various positions was derived and calculated, so both compressive stress and tangent friction force generated by the pull of wire rope were calculated. The result made by ANSYS software demonstrates the safety of the left drum which suffers from larger loads, structure improvement measures are put forward for the drum.

Stress Analysis and Structure Optimization for the Opening Flat Cover of Pressure Vessels

2012 ◽  
Vol 538-541 ◽  
pp. 3253-3258 ◽  
Author(s):  
Jun Jian Xiao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Concentration ◽  
Stress Analysis ◽  
Structure Optimization ◽  
Pressure Vessels ◽  
Secondary Stress ◽  
Element Analysis ◽  
Primary Stress ◽  
Flat Cover

According to the results of finite element analysis (FEA), when the diameter of opening of the flat cover is no more than 0.5D (d≤0.5D), there is obvious stress concentration at the edge of opening, but only existed within the region of 2d. Increasing the thickness of flat covers could not relieve the stress concentration at the edge of opening. It is recommended that reinforcing element being installed within the region of 2d should be used. When the diameter of openings is larger than 0.5D (d>0.5D), conical or round angle transitions could be employed at connecting location, with which the edge stress decreased remarkably. However, the primary stress plus the secondary stress would be valued by 3[σ].

Strength-based design of a sunflower stalk cutter machine design using finite element analysis and experimental validation

2021 ◽  
pp. 095440622110597
Author(s):  
Gürkan İrsel
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Analysis ◽  
Strain Gage ◽  
Experimental Validation ◽  
Experimental Studies ◽  
Fatigue Analysis ◽  
Structural Stress ◽  
Element Analysis ◽  
Strength Based

In this study, the total algorithm of the strength-based design of the system for mass production has been developed. The proposed algorithm, which includes numerical, analytical, and experimental studies, was implemented through a case study on the strength-based structural design and fatigue analysis of a tractor-mounted sunflower stalk cutting machine (SSCM). The proposed algorithm consists of a systematic engineering approach, material selection and testing, design of the mass criteria suitability, structural stress analysis, computer-aided engineering (CAE), prototype production, experimental validation studies, fatigue calculation based on an FE model and experimental studies (CAE-based fatigue analysis), and an optimization process aimed at minimum weight. Approximately 85% of the system was designed using standard commercially available cross-section beams and elements using the proposed algorithm. The prototype was produced, and an HBM data acquisition system was used to collect the strain gage output. The prototype produced was successful in terms of functionality. Two- and three-dimensional mixed models were used in the structural analysis solution. The structural stress analysis and experimental results with a strain gage were 94.48% compatible in this study. It was determined using nCode DesignLife software that fatigue damage did not occur in the system using the finite element analysis (FEA) and experimental data. The SSCM design adopted a multi-objective genetic algorithm (MOGA) methodology for optimization with ANSYS. With the optimization solved from 422 iterations, a maximum stress value of 57.65 MPa was determined, and a 97.72 kg material was saved compared to the prototype. This study provides a useful methodology for experimental and advanced CAE techniques, especially for further study on complex stress, strain, and fatigue analysis of new systematic designs desired to have an optimum weight to strength ratio.

Burst Pressure of Pressurized Cylinders With Hillside Nozzle

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
H. F. Wang ◽  
Z. F. Sang ◽  
L. P. Xue ◽  
G. E. O. Widera
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Experimental Models ◽  
Burst Pressure ◽  
Element Analysis ◽  
Test Models ◽  
Scale Test ◽  
Failure Location ◽  
Dimensional Instability ◽  
Good Agreement

The burst pressure of cylinders with hillside nozzle is determined using both experimental and finite element analysis (FEA) approaches. Three full-scale test models with different angles of the hillside nozzle were designed and fabricated specifically for a hydrostatic test in which the cylinders were pressurized with water. 3D static nonlinear finite element simulations of the experimental models were performed to obtain the burst pressures. The burst pressure is defined as the internal pressure for which the structure approaches dimensional instability, i.e., unbounded strain for a small increment in pressure. Good agreement between the predicted and measured burst pressures shows that elastic-plastic finite element analysis is a viable option to estimate the burst pressure of the cylinders with hillside nozzles. The preliminary results also suggest that the failure location is near the longitudinal plane of the cylinder-nozzle intersection and that the burst pressure increases slightly with an increment in the angle of the hillside nozzle.

Temperature and Stress Analysis of Corn Kernel— Finite Element Analysis

1979 ◽  
Vol 22 (4) ◽  
pp. 0955-0960 ◽  
Author(s):  
Robert J. Gustafson ◽  
David R. Thompson ◽  
Shahab Sokhansanj
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Analysis ◽  
Corn Kernel ◽  
Element Analysis
Sign in / Sign up

Export Citation Format

Share Document