Effect of Intake Charge Preheating and Equivalence Ratio in a Dual Fuel Diesel Engine Run on Biogas and Ethanol-Blended Diesel

2017 ◽  
Vol 140 (4) ◽  
Author(s):  
Achinta Sarkar ◽  
Ujjwal K. Saha
Keyword(s):  
Carbon Monoxide ◽  
Equivalence Ratio ◽  
Dual Fuel ◽  
Emission Characteristics ◽  
Maximum Torque ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Gaseous Fuels ◽  
Efficient Combustion ◽  
Overall Performance

Dual fuel diesel (DFD) engines have been gaining popularity due to the flexibility of using both bio and fossil liquid and gaseous fuels. Further, the efficient combustion in DFD mode with bio liquid and gaseous fuel can greatly reduce the greenhouse gas emissions as well as the dependency on fossil diesel. In recent times, a host of investigation has been done in normal dual fuel diesel (nDFD) mode with pure diesel and biogas. However, the engines with ethanol blended with diesel and intake charge (biogas–air mixture) with preheating have not been studied. In the present study, 5% ethanol blended with diesel (E5) and biogas with preheating are used in dual fuel engine (DFD-E5) to find their performance and emission characteristics. In order to have a direct comparison of performances, an engine with pure diesel (E0) and biogas with preheating is also tested in dual fuel mode (DFD-E0). In all the cases, the effect of total equivalence ratio on engine overall performance has also been investigated. In DFD-E5 mode, and at the maximum torque of 21.78 N·m, the brake thermal efficiency (BTE) increases by 2.98% as compared to nDFD mode. At the same torque, there is no trace of carbon monoxide (CO), whereas there is a reduction of hydrocarbon (HC) emission by 62.22% with respect to pure diesel (PD) mode. The nitrogen of oxides (NOx) is found to decrease in DFD modes in contrast to PD mode.

scholarly journals Performance and emissions of si engine with octane boosters

2018 ◽  
Vol 249 ◽  
pp. 03008
Author(s):  
Sai Vijay Venkatesh ◽  
R Udayakumar
Keyword(s):  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Emission Characteristics ◽  
Oxides Of Nitrogen ◽  
Performance Parameters ◽  
Si Engine ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Brake Power ◽  
Performance And Emissions

In today’s world we see that the demand for gasoline and cars keep increasing and one problem which is significantly seen is that we either opt for a fuel which provides higher performance or for a fuel which provides lesser emissions. In this study we aim to provide higher performance and lower emissions by combining two chemicals or octane boosters, namely ethanol and toluene with gasoline and find out its performance and emission characteristics when compared with traditional gasoline and ethanol-gasoline blend. In this study we have made four blends which are PP, E10, E10T5 and E20T5 which are tested against two performance parameters which are Specific Fuel Consumption, Brake Thermal Efficiency with respect to brake power and emissions parameter which are Carbon Dioxide, Carbon Monoxide, Oxides of Nitrogen and Hydrocarbon with respect to brake power as well. In each of these performance and emissions parameters, the blends are compared and we find that E20T5 has the highest performance and E10T5 has the lowest emission.

Experimental Investigation of the Influence of Adding Alumina to Diesel Fuel on the Engine Performance and Emission Characteristics

2020 ◽  
Vol 38 (4A) ◽  
pp. 523-529
Author(s):  
Sadiq T. Bunyan ◽  
Abed AL-Khadim M. Hassan
Keyword(s):  
Aluminum Oxide ◽  
Diesel Fuel ◽  
Equivalence Ratio ◽  
Engine Performance ◽  
Emission Characteristics ◽  
Al2o3 Nanoparticles ◽  
Gas Oil ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
20 Nm

The present experimental work is conducted to examine the influence of adding Alumina (Al2O3) nanoparticles to diesel fuel on the characteristic of the emissions and engine performance. The size of nanoparticles which have been added to diesel fuel to obtain nano-fuel is 20 nm. Three doses of Aluminum oxide were prepared (25, 50 and 100) ppm. The nanoparticles mixed with fuel by mechanical homogenous (manual electrical mixer) and ultrasonic processor. The study reveals that the adding of Aluminum oxide (Al2O3) to gas oil (Al2O3+DF) enhances the physical properties of fuel. Also, the adding of (Al2O3) reduce CO emissions by 20.5%, decrease NOx emission by 12.2%, increasing CO2 emissions by about 2.27% and decrease UHC emission about 13.5%. Furthermore, reduces the brake specific fuel consumption by 14.3%, decreasing the equivalence ratio by14.87% and improving the brake thermal efficiency by about 10.89%.

scholarly journals Performance and Emission Characteristics of Diesel Engine with the Biodiesel-Acetylene Addition using Dual Fuel Mode

2019 ◽  
Vol 9 (2S4) ◽  
pp. 616-621
Keyword(s):  
Diesel Engine ◽  
Research Work ◽  
Engine Performance ◽  
Dual Fuel ◽  
Emission Characteristics ◽  
Flow Rates ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Smoke Opacity ◽  
Fuel Technology

This research work investigated the diesel engine performance using 20% Pongamia grease methyl ester through the effect of different flow rates of acetylene using dual-fuel technique. Acetylene be inducted within the intake various at the flow rates of 1lpm, 2lpm, 3lpm and 4lpm along with air. Initially a test was conducted by diesel fuel along with POME20 on different loads. Then the experiment was carried out with POME20 with different flow rates of acetylene. Addition of acetylene increased the brake thermal efficiency (BTE) among POME20 at all acetylene flow rates on 100% load. The results showed that the BTE was enhanced via regarding 1–3.4% at knock-limited acetylene shares at 100% load. The engine emits higher NOx emission for POME20 without acetylene share and then it is additional improved with the adding up of acetylene shares, while the smoke opacity was reduced by 47% with acetylene addition at complete load. Here is a decrease in HC as well as CO emissions were experiential through an acetylene orientation along with POME20. Finally, it is suggested that the poor presentation as well as emissions connected through biodiesel into a diesel engine can be improved through the induction of acetylene with 4lpm flow rate in the intake various by dual fuel technology.

Effect of H2 and CO Content in Syngas on the Performance and Emission of Syngas-Diesel Dual Fuel Engine - A Review

2014 ◽  
Vol 699 ◽  
pp. 648-653 ◽  
Author(s):  
Bahaaddein K.M. Mahgoub ◽  
Suhaimi Hassan ◽  
Shaharin Anwar Sulaiman
Keyword(s):  
Carbon Monoxide ◽  
Diesel Engines ◽  
Combustion Process ◽  
Exhaust Emission ◽  
Dual Fuel ◽  
Pure Liquid ◽  
Compression Ignition ◽  
Performance And Emission ◽  
Combustion Duration ◽  
Combustible Gases

In this review, a series of research papers on the effects of hydrogen and carbon monoxide content in syngas composition on the performance and exhaust emission of compression ignition diesel engines, were compiled. Generally, the use of syngas in compression ignition (CI) diesel engine leads to reduce power output due to lower heating value when compared to pure liquid diesel mode. Therefore, variation in syngas composition, especially hydrogen and carbon monoxide (Combustible gases), is suggested to know the appropriate syngas composition. Furthermore, the simulated model of syngas will help to further explore the detailed effects of engine parameters on the combustion process including the ignition delay, combustion duration, heat release rate and combustion phasing. This will also contribute towards the efforts of improvement in performance and reduction in pollutants’ emissions from CI diesel engines running on syngas at dual fuel mode. Generally, the database of syngas composition is not fully developed and there is still room to find the optimum H2 and CO ratio for performance, emission and diesel displacement of CI diesel engines.

Exergy and Energy Analysis of α-Fe2O3-Doped Al2O3 Nanocatalyst-Based Biodiesel Blends—Performance and Emission Characteristics

2021 ◽  
Vol 143 (12) ◽  
Author(s):  
A. Anderson ◽  
Amal M. Al-Mohaimeed ◽  
Mohamed Soliman Elshikh ◽  
T. R. Praveenkumar ◽  
M. Sekar
Keyword(s):  
Carbon Monoxide ◽  
Energy Analysis ◽  
Unsaturated Fatty Acids ◽  
Engine Performance ◽  
Volume Ratio ◽  
Emission Characteristics ◽  
Biodiesel Blends ◽  
Performance And Emission ◽  
High Area ◽  
Load Conditions

Abstract The current study emphasis on the engine performance and emission characteristics of rapeseed and soya biodiesel dispersion on a novel nanocatalyst at different concentrations of 25 ppm and 50 ppm. The results of this study were compared with those of conventional diesel at varying load conditions on a combustion ignition engine. An α-Fe2O3-doped Al2O3 was mixed with rapeseed biodiesel and soya biodiesel using an ultrasonicator at a frequency of 25 kHz. This study revealed that the incorporation of nanoparticles in biodiesel enhanced the performance of the blends by reducing the content of lignin and other unsaturated fatty acids. The improvement in the performance of the engine is mainly attributed to the high area-to-volume ratio of the nanocatalyst. Emissions of NOx. hydrocarbon and carbon monoxide during the combustion reaction increased significantly when nanoparticles were added at higher concentrations. Contrastingly, the emission of NOx in pure biodiesel was higher than that in conventional diesel. The addition of nanoparticles reduced CO emissions due to the presence of extra oxygen molecules and converted carbon monoxide into carbon dioxide. Soya seed biodiesel blends with 50 ppm nanoparticles showed better engine performance and emission characteristics as compared with all other blends.

scholarly journals Performance and emission characteristics of dual fuel engine using biodiesels

2021 ◽  
Vol 850 (1) ◽  
pp. 012005
Author(s):  
Nikhil Muthu Kumar ◽  
Harsh Bhavsar ◽  
G Sakthivel ◽  
Mohammed Musthafa Feroskhan ◽  
K Karunamurthy
Keyword(s):  
Fish Oil ◽  
New Technologies ◽  
Dual Fuel ◽  
Emission Characteristics ◽  
Performance And Emission ◽  
Fuel Blends ◽  
Mahua Oil ◽  
Secondary Fuel ◽  
Ci Engine ◽  
Ci Engines

Abstract The introduction of the strict emissions norms is diverting the research for the development of new technologies which leads to the reduction of engine exhaust emissions. The usage of biodiesel in CI engine can enhance air quality index and protects the environment. Biodiesel can do an increment in the life of CI engines because it is clean-burning and a stable fuel when compared to diesel. Moreover, biogas has the potential to decrease both nitrogen oxides and smoke emissions simultaneously. Operating the engine in dual-fuel mode can provide lower emissions and a proper substitute for diesel. In this research, a modified CI Engine with single cylinder is used. Biogas is used as primary fuel and diesel, Mahua oil-diesel blend and Fish oil-diesel blend are used as secondary fuel. The effect of various secondary fuel blends on performance and emission characteristics in dual fuel engine are compared. In light of the performance and emission qualities it is reasoned that, utilization of the dual fuel mode in engine signifies the durability and lessens the harmful emissions from the engine with the exception of hydrocarbon and CO emissions. The excessive viscosity of fish oil and mahua oil prompts inconvenience in siphoning and spray attributes. The incompetent mixing of raw fish oil and raw mahua oil with diesel and biogas including air leads to incomplete combustion.

scholarly journals Effect of Waste Heat Recovery System on Performance and Emission Characteristics of Spark Ignition (SI) Engine Fuelled with Neat Ethanol (E100)

2021 ◽  
Vol 9 (2) ◽  
pp. 32-36
Keyword(s):  
Heat Recovery ◽  
Waste Heat Recovery ◽  
Waste Heat ◽  
Emission Characteristics ◽  
Si Engine ◽  
Ethanol Fuel ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Waste Heat Recovery System ◽  
Recovery System

TheSI engine could not be operatedefficientlywith neat ethanol fuel due to its high selfignition temperature and latent heat of vaporizationcompared with petrol.The above issues of SI engine is turned to be an objective of this study, where the SI engine was operated with neat ethanol fuel under different inlet air temperatures.The result of this study is indicated that the neat ethanol fuel could be utilized efficiently in SI engine with waste heat recovery system.The specific fuel consumption (SFC) of SI engine has decreased with neat ethanol fuel compared with petrol fuelled engine. It is also found that theSI engine has registered almost same brake thermal efficiency (BTE) values with neat ethanol compared to petrol.The exhaust emissions such as carbon monoxide (CO) and Hydrocarbon (HC)were reduced in SI engine, at the same time there was an increase in oxide of nitrogen (NOx).

Sign in / Sign up

Export Citation Format

Share Document