scholarly journals A Review of State of Health Estimation of Energy Storage Systems: Challenges and Possible Solutions for Futuristic Applications of Li-Ion Battery Packs in Electric Vehicles

2019 ◽  
Vol 16 (4) ◽  
Author(s):  
Sudipta Bijoy Sarmah ◽  
Pankaj Kalita ◽  
Akhil Garg ◽  
Xiao-dong Niu ◽  
Xing-Wei Zhang ◽  
...  
Keyword(s):  
Real Time ◽  
Electric Vehicles ◽  
Lithium Ion ◽  
Time Estimation ◽  
State Of Health ◽  
Li Ion Battery ◽  
Super Capacitor ◽  
Advantages And Disadvantages ◽  
Battery Packs ◽  
Li Ion

Lithium-ion (Li-ion) battery pack is vital for storage of energy produced from different sources and has been extensively used for various applications such as electric vehicles (EVs), watches, cookers, etc. For an efficient real-time monitoring and fault diagnosis of battery operated systems, it is important to have a quantified information on the state-of-health (SoH) of batteries. This paper conducts comprehensive literature studies on advancement, challenges, concerns, and futuristic aspects of models and methods for SoH estimation of batteries. Based on the studies, the methods and models for SoH estimation have been summarized systematically with their advantages and disadvantages in tabular format. The prime emphasis of this review was attributed toward the development of a hybridized method which computes SoH of batteries accurately in real-time and takes self-discharge into its account. At the end, the summary of research findings and the future directions of research such as nondestructive tests (NDT) for real-time estimation of battery SoH, finding residual SoH for the recycled batteries from battery packs, integration of mechanical aspects of battery with temperature, easy assembling–dissembling of battery packs, and hybridization of battery packs with photovoltaic and super capacitor are discussed.

Real-Time Estimation of Lithium-Ion Concentration in Both Electrodes of a Lithium-Ion Battery Cell Utilizing Electrochemical–Thermal Coupling

2017 ◽  
Vol 139 (3) ◽  
Author(s):  
Satadru Dey ◽  
Beshah Ayalew
Keyword(s):  
Real Time ◽  
Unscented Kalman Filter ◽  
Lithium Ion ◽  
Time Estimation ◽  
Li Ion Battery ◽  
Battery Cell ◽  
Thermal Dynamics ◽  
Estimation Scheme ◽  
Real Time Estimation ◽  
Li Ion

This paper proposes and demonstrates an estimation scheme for Li-ion concentrations in both electrodes of a Li-ion battery cell. The well-known observability deficiencies in the two-electrode electrochemical models of Li-ion battery cells are first overcome by extending them with a thermal evolution model. Essentially, coupling of electrochemical–thermal dynamics emerging from the fact that the lithium concentrations contribute to the entropic heat generation is utilized to overcome the observability issue. Then, an estimation scheme comprised of a cascade of a sliding-mode observer and an unscented Kalman filter (UKF) is constructed that exploits the resulting structure of the coupled model. The approach gives new real-time estimation capabilities for two often-sought pieces of information about a battery cell: (1) estimation of cell-capacity and (2) tracking the capacity loss due to degradation mechanisms such as lithium plating. These capabilities are possible since the two-electrode model needs not be reduced further to a single-electrode model by adding Li conservation assumptions, which do not hold with long-term operation. Simulation studies are included for the validation of the proposed scheme. Effect of measurement noise and parametric uncertainties is also included in the simulation results to evaluate the performance of the proposed scheme.

scholarly journals Calibration Optimization Methodology for Lithium-Ion Battery Pack Model for Electric Vehicles in Mining Applications

Energies ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3532 ◽  
Author(s):  
Majid Astaneh ◽  
Jelena Andric ◽  
Lennart Löfdahl ◽  
Dario Maggiolo ◽  
Peter Stopp ◽  
...  
Keyword(s):  
Electric Vehicles ◽  
Large Scale ◽  
Lithium Ion ◽  
Operating Conditions ◽  
Battery Pack ◽  
Li Ion Battery ◽  
Battery Packs ◽  
Li Ion ◽  
Optimization Methodology ◽  
Battery Cells

Large-scale introduction of electric vehicles (EVs) to the market sets outstanding requirements for battery performance to extend vehicle driving range, prolong battery service life, and reduce battery costs. There is a growing need to accurately and robustly model the performance of both individual cells and their aggregated behavior when integrated into battery packs. This paper presents a novel methodology for Lithium-ion (Li-ion) battery pack simulations under actual operating conditions of an electric mining vehicle. The validated electrochemical-thermal models of Li-ion battery cells are scaled up into battery modules to emulate cell-to-cell variations within the battery pack while considering the random variability of battery cells, as well as electrical topology and thermal management of the pack. The performance of the battery pack model is evaluated using transient experimental data for the pack operating conditions within the mining environment. The simulation results show that the relative root mean square error for the voltage prediction is 0.7–1.7% and for the battery pack temperature 2–12%. The proposed methodology is general and it can be applied to other battery chemistries and electric vehicle types to perform multi-objective optimization to predict the performance of large battery packs.

scholarly journals Scheduled Pre-Heating of Li-Ion Battery Packs for Balanced Temperature and State-of-Charge Distribution

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2212
Author(s):  
Hien Vu ◽  
Donghwa Shin
Keyword(s):  
Thermal Characteristics ◽  
Lithium Ion ◽  
State Of Charge ◽  
Battery Pack ◽  
Li Ion Battery ◽  
Internal Heating ◽  
Heating Efficiency ◽  
Battery Packs ◽  
Unit Cells ◽  
Li Ion

Lithium-ion batteries exhibit significant performance degradation such as power/energy capacity loss and life cycle reduction in low-temperature conditions. Hence, the Li-ion battery pack is heated before usage to enhance its performance and lifetime. Recently, many internal heating methods have been proposed to provide fast and efficient pre-heating. However, the proposed methods only consider a combination of unit cells while the internal heating should be implemented for multiple groups within a battery pack. In this study, we investigated the possibility of timing control to simultaneously obtain balanced temperature and state of charge (SOC) between each cell by considering geometrical and thermal characteristics of the battery pack. The proposed method schedules the order and timing of the charge/discharge period for geometrical groups in a battery pack during internal pre-heating. We performed a pack-level simulation with realistic electro-thermal parameters of the unit battery cells by using the mutual pulse heating strategy for multi-layer geometry to acquire the highest heating efficiency. The simulation results for heating from −30 ∘ C to 10 ∘ C indicated that a balanced temperature-SOC status can be achieved via the proposed method. The temperature difference can be decreased to 0.38 ∘ C and 0.19% of the SOC difference in a heating range of 40 ∘ C with only a maximum SOC loss of 2.71% at the end of pre-heating.

scholarly journals Current Li-Ion Battery Technologies in Electric Vehicles and Opportunities for Advancements

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1074 ◽  
Author(s):  
Yu Miao ◽  
Patrick Hynan ◽  
Annette von Jouanne ◽  
Alexandre Yokochi
Keyword(s):  
Electric Vehicles ◽  
Electrode Materials ◽  
Negative Electrode ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Li Ion Batteries ◽  
Li Ion Battery ◽  
Li Ion ◽  
On The Road

Over the past several decades, the number of electric vehicles (EVs) has continued to increase. Projections estimate that worldwide, more than 125 million EVs will be on the road by 2030. At the heart of these advanced vehicles is the lithium-ion (Li-ion) battery which provides the required energy storage. This paper presents and compares key components of Li-ion batteries and describes associated battery management systems, as well as approaches to improve the overall battery efficiency, capacity, and lifespan. Material and thermal characteristics are identified as critical to battery performance. The positive and negative electrode materials, electrolytes and the physical implementation of Li-ion batteries are discussed. In addition, current research on novel high energy density batteries is presented, as well as opportunities to repurpose and recycle the batteries.

Joining Technologies for Automotive Lithium-Ion Battery Manufacturing: A Review

2010 ◽  
Author(s):  
S. Shawn Lee ◽  
Tae H. Kim ◽  
S. Jack Hu ◽  
Wayne W. Cai ◽  
Jeffrey A. Abell
Keyword(s):  
Lithium Ion Battery ◽  
Electric Vehicles ◽  
Hybrid Electric Vehicles ◽  
Dissimilar Materials ◽  
Lithium Ion ◽  
Cell Types ◽  
Advantages And Disadvantages ◽  
Battery Packs ◽  
Hybrid Electric ◽  
Battery Cells

Automotive battery packs for electric vehicles (EV), hybrid electric vehicles (HEV), and plug-in hybrid electric vehicles (PHEV) typically consist of a large number of battery cells. These cells must be assembled together with robust mechanical and electrical joints. Joining of battery cells presents several challenges such as welding of highly conductive and dissimilar materials, multiple sheets joining, and varying material thickness combinations. In addition, different cell types and pack configurations have implications for battery joining methods. This paper provides a comprehensive review of joining technologies and processes for automotive lithium-ion battery manufacturing. It details the advantages and disadvantages of the joining technologies as related to battery manufacturing, including resistance welding, laser welding, ultrasonic welding and mechanical joining, and discusses corresponding manufacturing issues. Joining processes for electrode-to-tab, tab-to-tab (tab-to-bus bar), and module-to-module assembly are discussed with respect to cell types and pack configuration.

Development of a Two-Dimensional Thermal Model for Li-Ion Battery Pack With Experimental Validation

2019 ◽  
Vol 12 (2) ◽  
Author(s):  
Haoting Wang ◽  
Ning Liu ◽  
Lin Ma
Keyword(s):  
Real Time ◽  
Large Scale ◽  
Experimental Validation ◽  
Computational Cost ◽  
Battery Pack ◽  
Two Dimensional ◽  
Li Ion Battery ◽  
New Approach ◽  
Battery Packs ◽  
Li Ion

Abstract This paper reports the development of a two-dimensional two states (2D2S) model for the analysis of thermal behaviors of Li-ion battery packs and its experimental validation. This development was motivated by the need to fill a niche in our current modeling capabilities: the need to analyze 2D temperature (T) distributions in large-scale battery packs in real time. Past models were predominately developed to either provide detailed T information with high computational cost or provide real-time analysis but only 1D lumped T information. However, the capability to model 2D T field in real time is desirable in many applications ranging from the optimal design of cooling strategies to onboard monitoring and control. Therefore, this work developed a new approach to provide this desired capability. The key innovations in our new approach involved modeling the whole battery pack as a complete thermal-fluid network and at the same time calculating only two states (surface and core T) for each cell. Modeling the whole pack as a complete network captured the interactions between cells and enabled the accurate resolution of the 2D T distribution. Limiting the calculation to only the surface and core T controlled the computational cost at a manageable level and rendered the model suitable for packs at large scale with many cells.

State-of-Health Online Estimation for Li-Ion Battery

2020 ◽  
Vol 9 (2) ◽  
pp. 185-196
Author(s):  
Liu Fang ◽  
◽  
Liu Xinyi ◽  
Su Weixing ◽  
Chen Hanning ◽  
...  
Keyword(s):  
Estimation Method ◽  
Equivalent Circuit Model ◽  
Lithium Ion ◽  
Estimation Methods ◽  
Battery Management ◽  
State Of Health ◽  
Li Ion Battery ◽  
Improved Genetic Algorithm ◽  
Battery Management Systems ◽  
Li Ion

To realize a fast and high-precision online state-of-health (SOH) estimation of lithium-ion (Li-Ion) battery, this article proposes a novel SOH estimation method. This method consists of a new SOH model and parameters identification method based on an improved genetic algorithm (Improved-GA). The new SOH model combines the equivalent circuit model (ECM) and the data-driven model. The advantages lie in keeping the physical meaning of the ECM while improving its dynamic characteristics and accuracy. The improved-GA can effectively avoid falling into a local optimal problem and improve the convergence speed and search accuracy. So the advantages of the SOH estimation method proposed in this article are that it only relies on battery management systems (BMS) monitoring data and removes many assumptions in some other traditional ECM-based SOH estimation methods, so it is closer to the actual needs for electric vehicle (EV). By comparing with the traditional ECM-based SOH estimation method, the algorithm proposed in this article has higher accuracy, fewer identification parameters, and lower computational complexity.

Sign in / Sign up

Export Citation Format

Share Document