A Parallel Multiple Layer Cryolithography Device for the Manufacture of Biological Material for Tissue Engineering

2019 ◽  
Vol 13 (3) ◽  
Author(s):  
Gideon Ukpai ◽  
Joseph Sahyoun ◽  
Robert Stuart ◽  
Sky Wang ◽  
Zichen Xiao ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
3D Structure ◽  
Three Dimensional ◽  
3D Object ◽  
New Device ◽  
Biological Matter ◽  
Simple Product ◽  
Printing Processes

While three-dimensional (3D) printing of biological matter is of increasing interest, current linear 3D printing processes lack the efficiency at scale required to mass manufacture products made of biological matter. This paper introduces a device for a newly developed parallel additive manufacturing technology for production of 3D objects, which addresses the need for faster, industrial scale additive manufacturing methods. The technology uses multilayer cryolithography (MLCL) to make biological products faster and in larger quantities by simultaneously printing two-dimensional (2D) layers in parallel and assembling the layers into a 3D structure at an assembly site, instead of sequentially and linearly assembling a 3D object from individual elements as in conventional 3D printing. The technique uses freezing to bind the 2D layers together into a 3D object. This paper describes the basic principles of MLCL and demonstrates the technology with a new device used to manufacture a very simple product that could be used for tissue engineering, as an example. An evaluation of the interlayer bonding shows that a continuous and coherent structure can be made from the assembly of distinct layers using MLCL.

scholarly journals Advances in 3D Printing for Tissue Engineering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3149
Author(s):  
Angelika Zaszczyńska ◽  
Maryla Moczulska-Heljak ◽  
Arkadiusz Gradys ◽  
Paweł Sajkiewicz
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Complex Structure ◽  
Three Dimensional ◽  
Computer Assisted ◽  
Scaffold Fabrication ◽  
Manufacturing Techniques ◽  
Printing Techniques ◽  
State Of Art

Tissue engineering (TE) scaffolds have enormous significance for the possibility of regeneration of complex tissue structures or even whole organs. Three-dimensional (3D) printing techniques allow fabricating TE scaffolds, having an extremely complex structure, in a repeatable and precise manner. Moreover, they enable the easy application of computer-assisted methods to TE scaffold design. The latest additive manufacturing techniques open up opportunities not otherwise available. This study aimed to summarize the state-of-art field of 3D printing techniques in applications for tissue engineering with a focus on the latest advancements. The following topics are discussed: systematics of the available 3D printing techniques applied for TE scaffold fabrication; overview of 3D printable biomaterials and advancements in 3D-printing-assisted tissue engineering.

scholarly journals Additive Manufacturing of Biopolymers for Tissue Engineering and Regenerative Medicine: An Overview, Potential Applications, Advancements, and Trends

2021 ◽  
Vol 2021 ◽  
pp. 1-20 ◽  
Author(s):  
Dhinakaran Veeman ◽  
M. Swapna Sai ◽  
P. Sureshkumar ◽  
T. Jagadeesha ◽  
L. Natrayan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Regenerative Medicine ◽  
Tissue Regeneration ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Wide Range ◽  
Potential Applications ◽  
Pharmaceutical Industries

As a technique of producing fabric engineering scaffolds, three-dimensional (3D) printing has tremendous possibilities. 3D printing applications are restricted to a wide range of biomaterials in the field of regenerative medicine and tissue engineering. Due to their biocompatibility, bioactiveness, and biodegradability, biopolymers such as collagen, alginate, silk fibroin, chitosan, alginate, cellulose, and starch are used in a variety of fields, including the food, biomedical, regeneration, agriculture, packaging, and pharmaceutical industries. The benefits of producing 3D-printed scaffolds are many, including the capacity to produce complicated geometries, porosity, and multicell coculture and to take growth factors into account. In particular, the additional production of biopolymers offers new options to produce 3D structures and materials with specialised patterns and properties. In the realm of tissue engineering and regenerative medicine (TERM), important progress has been accomplished; now, several state-of-the-art techniques are used to produce porous scaffolds for organ or tissue regeneration to be suited for tissue technology. Natural biopolymeric materials are often better suited for designing and manufacturing healing equipment than temporary implants and tissue regeneration materials owing to its appropriate properties and biocompatibility. The review focuses on the additive manufacturing of biopolymers with significant changes, advancements, trends, and developments in regenerative medicine and tissue engineering with potential applications.

Importance of 3D Printing Technology in Medical Fields

2019 ◽  
pp. 21-40
Author(s):  
Ranjit Barua ◽  
Sudipto Datta ◽  
Amit Roychowdhury ◽  
Pallab Datta
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
New Technology ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Medical Field ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Proper Material

Three-dimensional or 3D printing technology is a growing interest in medical fields like tissue engineering, dental, drug delivery, prosthetics, and implants. It is also known as the additive manufacturing (AM) process because the objects are done by extruding or depositing the material layer by layer, and the material may be like biomaterials, plastics, living cells, or powder ceramics. Specially in the medical field, this new technology has importance rewards in contrast with conventional technologies, such as the capability to fabricate patient-explicit difficult components, desire scaffolds for tissue engineering, and proper material consumption. In this chapter, different types of additive manufacturing (AM) techniques are described that are applied in the medical field, especially in community health and precision medicine.

Fabrication of nanocellulose/PEGDA hydrogel by 3D printing

2018 ◽  
Vol 24 (8) ◽  
pp. 1265-1271 ◽  
Author(s):  
Aimin Tang ◽  
Qinwen Wang ◽  
Shan Zhao ◽  
Wangyu Liu
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
3D Structure ◽  
Three Dimensional ◽  
Aqueous Dispersion ◽  
Compression Modulus ◽  
Content Type ◽  
Precise Control ◽  
Light Curing ◽  
Equilibrium Swelling Ratio

Purpose Nanocellulose is characterised by favourable biocompatibility, degradability, nanostructure effect, high modulus and high tensile strength and has been widely applied in various fields. The current research in the field of new nanocellulose materials mainly focuses on the hydrogel, aerogel and the tissue engineering scaffold. All of these are three-dimensional (3D) porous materials, but conventional manufacturing technology fails to realise precise control. Therefore, the method of preparing structural materials using 3D printing and adopting the nanocellulose as the 3D printing material has been proposed. Then, how to realise 3D printing of nanocellulose is the problem that should be solved. Design/methodology/approach By adding the photosensitive component polyethyleneglycol diacrylate (PEGDA) in the aqueous dispersion system of nanocellulose, the nanocellulose was endowed with photosensitivity. Then, nanocellulose/PEGDA hydrogels were prepared by the additive manufacturing of nanocellulose through light curing. Findings The results showed that the nanocellulose/PEGDA hydrogels had a uniform shape and a controllable structure. The nanocellulose supported the scaffold structure in the hydrogels. Prepared with 1.8 per cent nanocellulose through 40 s of light curing, the nanocellulose/PEGDA hydrogels had a maximum compression modulus of 0.91 MPa. The equilibrium swelling ratio of the nanocellulose/PEGDA hydrogel prepared with 1.8 per cent nanocellulose was 13.56, which increased by 44 per cent compared with that of the PEGDA hydrogel without nanocellulose. Originality/value The paper proposed a method for rapidly prototyping the nanocellulose with expected properties, which provided a theoretical basis and technological reference for the 3D additive manufacturing of nanocellulose 3D structure materials with a controlled accurate architecture.

Manufacturability Feedback and Model Correction for Additive Manufacturing

2014 ◽  
Author(s):  
Saigopal Nelaturi ◽  
Walter Kim ◽  
Arvind Rangarajan ◽  
Tolga Kurtoglu
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Medial Axis ◽  
Three Dimensional ◽  
Medial Axis Transform ◽  
Specific Design ◽  
Model Correction ◽  
Geometric Deviations ◽  
Physical Limitations ◽  
Printing Processes

Additive manufacturing, or 3d printing, is the process of building three dimensional solid shapes by accumulating material laid out in sectional layers. Additive manufacturing has been recognized for enabling production of complex custom parts that are difficult to manufacture otherwise. However, the dependence on build orientation and physical limitations of printing processes invariably lead to geometric deviations between manufactured and designed shapes that are usually evaluated after manufacture. In this paper, we formalize the measurement of such deviations in terms of a printability map that simulates the printing process and partitions each printed layer into disjoint regions with distinct local measures of size. We show that manufacturing capabilities such as printing resolution, and material specific design recommendations such as minimal feature sizes may be coupled in the printability map to evaluate expected deviations before manufacture. Furthermore, we demonstrate how partitions with size measures below required resolutions may be modified using properties of the medial axis transform, and use the corrected printability map to construct a representation of the manufactured model. We conclude by discussing several applications of the printability map for additive manufacturing.

Regulating 3D-printed medical products

2018 ◽  
Vol 10 (461) ◽  
pp. eaan6521 ◽  
Author(s):  
Laura M. Ricles ◽  
James C. Coburn ◽  
Matthew Di Prima ◽  
Steven S. Oh
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Medical Devices ◽  
Three Dimensional ◽  
Emerging Technology ◽  
3D Object ◽  
Medical Products ◽  
3D Printed ◽  
Regulatory Landscape ◽  
The U.S

Additive manufacturing [also known as three-dimensional (3D) printing] is the layer-wise deposition of material to produce a 3D object. This rapidly emerging technology has the potential to produce new medical products with unprecedented structural and functional designs. Here, we describe the U.S. regulatory landscape of additive manufactured (3D-printed) medical devices and biologics and highlight key challenges and considerations.

scholarly journals Emergence of Three-Dimensional Printing Technology and Its Utility in Spine Surgery

2018 ◽  
Vol 12 (2) ◽  
pp. 365-371 ◽  
Author(s):  
Akshay Gadia ◽  
Kunal Shah ◽  
Abhay Nene
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Spine Surgery ◽  
Recent Literature ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
New Research ◽  
Dimensional Printing

<p>In the last decade, spine surgery has advanced tremendously. Tissue engineering and three-dimensional (3D) printing/additive manufacturing have provided promising new research avenues in the fields of medicine and orthopedics in recent literature, and their emergent role in spine surgery is encouraging. We reviewed recent articles that highlighted the role of 3D printing in medicine, orthopedics, and spine surgery and summarized the utility of 3D printing. 3D printing has shown promising results in various aspects of spine surgery and can be a useful tool for spine surgeons. The growing research on tissue bioengineering and its application in conjunction with additive manufacturing has revealed great potential for tissue bioengineering in the treatment of spinal ailments.</p>

scholarly journals Editorial for the Special Issue on 3D Printing for Tissue Engineering and Regenerative Medicine

Micromachines ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 366 ◽  
Author(s):  
Vahid Serpooshan ◽  
Murat Guvendiren
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Regenerative Medicine ◽  
Three Dimensional ◽  
Living Cells ◽  
3D Bioprinting ◽  
Special Issue ◽  
3D Structures ◽  
Manufacturing Techniques

Three-dimensional (3D) bioprinting uses additive manufacturing techniques to fabricate 3D structures consisting of heterogenous selections of living cells, biomaterials, and active biomolecules [...]

Importance of 3D Printing Technology in Medical Fields

2021 ◽  
pp. 704-717
Author(s):  
Ranjit Barua ◽  
Sudipto Datta ◽  
Amit Roychowdhury ◽  
Pallab Datta
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
New Technology ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Medical Field ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Proper Material

Three-dimensional or 3D printing technology is a growing interest in medical fields like tissue engineering, dental, drug delivery, prosthetics, and implants. It is also known as the additive manufacturing (AM) process because the objects are done by extruding or depositing the material layer by layer, and the material may be like biomaterials, plastics, living cells, or powder ceramics. Specially in the medical field, this new technology has importance rewards in contrast with conventional technologies, such as the capability to fabricate patient-explicit difficult components, desire scaffolds for tissue engineering, and proper material consumption. In this chapter, different types of additive manufacturing (AM) techniques are described that are applied in the medical field, especially in community health and precision medicine.

Manufacturability Feedback and Model Correction for Additive Manufacturing

2015 ◽  
Vol 137 (2) ◽  
Author(s):  
Saigopal Nelaturi ◽  
Walter Kim ◽  
Tolga Kurtoglu
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Medial Axis ◽  
Three Dimensional ◽  
Medial Axis Transform ◽  
Specific Design ◽  
Model Correction ◽  
Geometric Deviations ◽  
Physical Limitations ◽  
Printing Processes

Additive manufacturing, or 3D printing, is the process of building three-dimensional solid shapes by accumulating material laid out in sectional layers. Additive manufacturing has been recognized for enabling production of complex custom parts that are difficult to manufacture otherwise. However, the dependence on build orientation and physical limitations of printing processes invariably lead to geometric deviations between manufactured and designed shapes that are usually evaluated after manufacture. In this paper, we formalize the measurement of such deviations in terms of a printability map that simulates the printing process and partitions each printed layer into disjoint regions with distinct local measures of size. We show that manufacturing capabilities, such as printing resolution, and material specific design recommendations, such as minimal feature sizes, may be coupled in the printability map to evaluate expected deviations before manufacture. Furthermore, we demonstrate how partitions with size measures below required resolutions may be modified using properties of the medial axis transform and use the corrected printability map to construct a representation of the manufactured model. We conclude by discussing several applications of the printability map for additive manufacturing.

Sign in / Sign up

Export Citation Format

Share Document