scholarly journals A Cable-Driven Parallel Robot with Full-Circle End-Effector Rotations

2021 ◽  
pp. 1-11 ◽  
Author(s):  
Marceau Metillon ◽  
Philippe Cardou ◽  
Kevin Subrin ◽  
Camilo Charron ◽  
Stéphane Caro
Keyword(s):  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Rigid Base ◽  
Six Degrees Of Freedom ◽  
Spherical Wrist ◽  
In Series ◽  
Dynamic Performances ◽  
Moving Platform ◽  
Orientation Workspace

Abstract Cable-Driven Parallel Robots (CDPRs) offer high payload capacities, large translational workspace and high dynamic performances. The rigid base frame of the CDPR is connected in parallel to the moving platform using cables. However, their orientation workspace is usually limited due to cable/cable and cable/moving platform collisions. This paper deals with the design, modelling and prototyping of a hybrid robot. This robot, which is composed of a CDPR mounted in series with a Parallel Spherical Wrist (PSW), has both a large translational workspace and an unlimited orientation workspace. It should be noted that the six degrees of freedom (DOF) motions of the moving platform of the CDPR, namely, the base of the PSW, and the three-DOF motion of the PSW are actuated by means of eight actuators fixed to the base. As a consequence, the overall system is underactuated and its total mass and inertia in motion is reduced.

scholarly journals A Cable-Driven Parallel Robot With Full-Circle End-Effector Rotations

2020 ◽  
Author(s):  
Marceau Métillon ◽  
Saman Lessanibahri ◽  
Philippe Cardou ◽  
Kévin Subrin ◽  
Stéphane Caro
Keyword(s):  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Rigid Base ◽  
Six Degrees Of Freedom ◽  
Spherical Wrist ◽  
In Series ◽  
Dynamic Performances ◽  
Moving Platform ◽  
Orientation Workspace

Abstract Cable-Driven Parallel Robots (CDPRs) offer high payload capacities, large translational workspace and high dynamic performances. The rigid base frame of the CDPR is connected in parallel to the moving platform using cables. However, their orientation workspace is usually limited due to cable/cable and cable/moving platform collisions. This paper deals with the designing, modelling and prototyping of a hybrid robot. This robot, which is composed of a CDPR mounted in series with a Parallel Spherical Wrist (PSW), has both a large translational workspace and an unlimited orientation workspace. It should be noted that the six degrees of freedom (DOFs) motions of the moving platform of the CDPR, namely, the base of the PSW, and the three-DOFs motion of the PSW are actuated by means of eight actuators fixed to the base. As a consequence, the overall system is underactuated and its total mass and inertia in motion is reduced.

Workspace Optimization of a Six Degrees of Freedom Parallel Manipulator for Micromachining

2010 ◽  
Author(s):  
Ahmet Agaoglu ◽  
Namik Ciblak ◽  
Koray K. Safak
Keyword(s):  
Numerical Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Base Plane ◽  
Six Degrees Of Freedom ◽  
Moving Platform ◽  
Workspace Optimization ◽  
Kinematic Diagram ◽  
Orientation Workspace

This work addresses the optimization of the workspace of a six degrees of freedom parallel manipulator. In this study, The topology of the manipulator is composed of three xy-tables, symmetrically positioned on a circle on a base plane, connected by three legs to a moving platform. Kinematic composition of the manipulator is introduced and kinematic diagram is illustrated. Orientation workspace is investigated using three different orientation representations. XYZ fixed angles representation is selected considering the benefits of its visualization are considered. By using this representation, the orientation workspace is modeled and kinematic circuits of the manipulator are explored. First, optimization is performed without slider limitations. A result table is obtained based on the user defined parameters. Secondly, optimization is performed under slider limitations. The maximal orientation capability is optimized using numerical analysis. The optimized configuration of the manipulator indicates that a 330% increase in orientation capability is achieved, compared to the old configuration.

Six degrees of freedom parallel robots with C5 links

Robotica ◽  
1992 ◽  
Vol 10 (1) ◽  
pp. 35-44 ◽  
Author(s):  
Y. Amirat ◽  
F. Artigue ◽  
J. Pontnau
Keyword(s):  
Automotive Industry ◽  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Parallel Architecture ◽  
Parallel Robot ◽  
Parallel Architectures ◽  
Parallel Robots ◽  
Left Hand ◽  
Six Degrees Of Freedom ◽  
Assembly Tasks

SummaryThis paper presents at first a static and kinematic analysis of closed chains mechanisms which permits to deduce different possible fully parallel architectures. Then we focus on a particular parallel architecture with C5 links designed to perform precise assembly tasks. A general modeling of this C5 parallel robot is presented. Two typical assembly tasks in the automotive industry are also proposed; the first one uses the C5 links parallel robot as a left-hand device, while the second one uses it as the terminal tool of a sequential manipulator.

scholarly journals Rotational Workspace Expansion of a Planar CDPR with a Circular End-Effector Mechanism Allowing Passive Reconfiguration

Robotics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 57 ◽  
Author(s):  
Marco Carpio Alemán ◽  
Roque Saltaren ◽  
Alejandro Rodriguez ◽  
Gerardo Portilla ◽  
Juan Placencia
Keyword(s):  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
End Effector ◽  
Effector Mechanism ◽  
Circular Structure ◽  
Adams Software ◽  
Anchor Points ◽  
Orientation Workspace ◽  
Three Degrees Of Freedom

Cable-Driven Parallel Robots (CDPR) operate over a large positional workspace and a relatively large orientation workspace. In the present work, the expansion of the orientation Wrench Feasible Workspace (WFW) in a planar four-cable passive reconfigurable parallel robot with three degrees of freedom was determined. To this end, we proposed a circular-geometry effector mechanism, whose structure allows automatic mobility of the two anchor points of the cables supporting the End Effector (EE). The WFW of the proposed circular structure robot was compared with that of a traditional robot with a rectangular geometry and fixed anchor points. Considering the feasible geometric and tension forces on the cables, the generated workspace volume of the robot was demonstrated in an analysis-by-intervals. The results were validated by simulating the orientation movements of the robot in ADAMS software and a real experimental test was developed for a hypothetical case. The proposed design significantly expanded the orientation workspace of the robot. The remaining limitation is the segment of the travel space in which the mobile connection points can slide. Overcoming this limitation would enable the maximum rotation of the EE.

Motion/Force Transmissibility Based Performance Evaluation of a 6-DOF Parallel Robot With 2-DOF Active Joints

2018 ◽  
Author(s):  
Bin Mei ◽  
Fugui Xie ◽  
Xin-Jun Liu ◽  
Xuan Luo
Keyword(s):  
Performance Evaluation ◽  
Degrees Of Freedom ◽  
Evaluation Method ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Six Degrees Of Freedom ◽  
Transmission Index ◽  
Force Transmissibility ◽  
Local Transmission ◽  
Active Joints

3-PP(Pa)S robot is a six degrees of freedom (DOFs) parallel mechanism with 2-DOF active planar joint. For the design and application of the 3-PP(Pa)S robot, it is essential to investigate the motion/force transmissibility of the robot. But previous studies of the motion/force transmissibility have mainly focused on the parallel robots with 1-DOF active joints and thus cannot be directly applied to the 3-PP(Pa)S robot. In this paper, input twist subspace, transmission wrench subspace and output twist subspace are investigated to build mathematical models of the twists and wrenches corresponding to the 2-DOF active planar joint. Afterwards, based on the previous established frame of the local transmission index, some extended performance evaluation indices are defined to describe the motion/force transmissibility of the 3-PP(Pa)S robot. On this basis, the singularity and motion/force transmissibility of this mechanism are investigated. The motion/force transmissibility evaluation method is meaningful and applicable for the 3-PP(Pa)S parallel robot with 2-DOF active joints and can be further applied to other mechanisms with multi-DOF active joints.

scholarly journals Path-planning of a hybrid parallel robot using stiffness and workspace for foot rehabilitation

2018 ◽  
Vol 10 (1) ◽  
pp. 168781401775415 ◽  
Author(s):  
Alireza Rastegarpanah ◽  
Hamid Rakhodaei ◽  
Mozafar Saadat ◽  
Mohammad Rastegarpanah ◽  
Naresh Marturi ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Degree Of Freedom ◽  
Position Vector ◽  
Parallel Mechanisms ◽  
Moving Platforms ◽  
Maximum Stiffness ◽  
In Series ◽  
Applied Forces

Stiffness is one of the important parameters for estimating the performance of hybrid parallel robots as it is not constant throughout its workspace. The aim of this study is to provide an optimum path based on maximum stiffness within the workspace of a 9-degree-of-freedom hybrid parallel mechanism configuration, which includes nine linear actuators connecting one stationary and two moving platforms in series. The proposed robot is designed for ankle rehabilitation, where accurate and precise movement of lower extremities is required. The design takes advantage of two important characteristics of parallel robots: stiffness and workspace. The proposed methodology to determine the stiffness of hybrid robot in three single axes is based on calculation of position vector of each actuator in any particular pose, by considering the inverse kinematics of the system, in order to obtain the magnitude and direction of the applied forces. The results obtained from the workspace calculations have been compared with those of two standard parallel mechanisms including a 6-degree-of-freedom hexapod and a tripod with 3 degrees of freedom. The stiffness of the robot has been calculated in simulation and then compared with those of a developed prototype hybrid model in two different case studies.

A learning-based control framework for cable-driven parallel robots with unknown Jacobians

2020 ◽  
Vol 234 (9) ◽  
pp. 1024-1036
Author(s):  
Hao Xiong ◽  
Lin Zhang ◽  
Xiumin Diao
Keyword(s):  
Neural Network ◽  
Control Strategy ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Parallel Robot ◽  
Joint Space ◽  
Parallel Robots ◽  
The Neural Network ◽  
Control Framework ◽  
In Series

Cable-driven parallel robots have been studied by many researchers in the past decades. The Jacobian of a cable-driven parallel robot may not be determined in some applications such as rehabilitation. In order to control the pose of a fully constrained cable-driven parallel robot with unknown Jacobian and driven by torque-controlled actuators, a learning-based control framework consisting of a robust controller and a neural network in series is proposed in this article. The neural network takes over the role of the Jacobian by mapping a wrench applied on the end-effector of the cable-driven parallel robot at a pose in the task space to a set of cable tensions in the joint space. In this way, the cable-driven parallel robot can be controlled by cable tensions derived from such a mapping, rather than solving the inverse dynamics problem based on the Jacobian. As an example, a control strategy is developed to demonstrate how the proposed control framework works. The control strategy includes a proportional–integral–derivative controller and a feedforward neural network. Simulation results show that the control strategy can successfully control a cable-driven parallel robot with four cables, three degrees of freedom, and unknown Jacobian.

Modelling and Simulation of a Isoglide T3R1 Parallel Robot

2010 ◽  
Vol 166-167 ◽  
pp. 457-462
Author(s):  
Dan Verdes ◽  
Radu Balan ◽  
Máthé Koppány
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Practical Implementation ◽  
Medical Robots ◽  
The Past ◽  
And Control ◽  
Workspace Design ◽  
Human Systems

Parallel robots find many applications in human-systems interaction, medical robots, rehabilitation, exoskeletons, to name a few. These applications are characterized by many imperatives, with robust precision and dynamic workspace computation as the two ultimate ones. This paper presents kinematic analysis, workspace, design and control to 3 degrees of freedom (DOF) parallel robots. Parallel robots have received considerable attention from both researchers and manufacturers over the past years because of their potential for high stiffness, low inertia and high speed capability. Therefore, the 3 DOF translation parallel robots provide high potential and good prospects for their practical implementation in human-systems interaction.

Construction of a Six-Degrees-of-Freedom Parallel Manipulator With Three Planarly Actuated Links

1996 ◽  
Author(s):  
Ronen Ben-Horin ◽  
Moshe Shoham
Keyword(s):  
Parallel Manipulator ◽  
High Performance ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Simple Design ◽  
Output Link ◽  
Coordinated Motion ◽  
Six Degrees Of Freedom ◽  
Work Volume ◽  
New Type

Abstract The construction of a new type of a six-degrees-of-freedom parallel robot is presented in this paper. Coordinated motion of three planar motors, connected to three fixed-length links, produces a six-degrees-of-freedom motion of an output link. Its extremely simple design along with much larger work volume make this high performance-to-simplicity ratio robot very attractive.

Sign in / Sign up

Export Citation Format

Share Document