Investigation for Energy Consumption and Analysis for Energy Saving Potential of Residential Buildings in Wuhan

2009 ◽  
pp. 1-4 ◽  
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Residential Buildings ◽  
Energy Saving Potential

Investigation of Existing Situation and Study on Energy-Saving Potential of Rural Residential Buildings in Pearl River Delta

2011 ◽  
Vol 374-377 ◽  
pp. 199-203
Author(s):  
Ting Ting Li ◽  
Li Hua Zhao
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Pearl River Delta ◽  
Residential Buildings ◽  
High Energy ◽  
Building Envelope ◽  
River Delta ◽  
Pearl River ◽  
Brick Wall ◽  
Energy Saving Potential

The rapid development of rural economy has led the massive construction of rural dwellings, while the energy consumption is increasing correspondingly. A field study was carried out in local nine villages of Pearl River Delta, aims to look into actual conditions of rural residential buildings and explore the energy-saving potential, a detailed questionnaire survey was conducted as well to investigate the construction of rural dwellings and the influencing factors in design. The results of this investigation, which focused on dwellings built by residents, revealed that the built form of dwellings is generally Low-rise house, the average storey height ranges from 3.6 to 4 meters. The primary building envelope is 200 cm clay brick wall construction, and not insulated flat roofing, moreover, the high energy consumption of increasing multistorey dwellings has drawn attention.

scholarly journals Systematic Method for the Energy-Saving Potential Calculation of Air-Conditioning Systems via Data Mining. Part I: Methodology

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 81
Author(s):  
Rongjiang Ma ◽  
Shen Yang ◽  
Xianlin Wang ◽  
Xi-Cheng Wang ◽  
Ming Shan ◽  
...  
Keyword(s):  
Data Mining ◽  
Energy Consumption ◽  
Energy Saving ◽  
Air Conditioning ◽  
Storage System ◽  
Operation Mode ◽  
Systematic Method ◽  
Potential Analysis ◽  
Energy Saving Potential ◽  
Air Conditioning Systems

Air-conditioning systems contribute the most to energy consumption among building equipment. Hence, energy saving for air-conditioning systems would be the essence of reducing building energy consumption. The conventional energy-saving diagnosis method through observation, test, and identification (OTI) has several drawbacks such as time consumption and narrow focus. To overcome these problems, this study proposed a systematic method for energy-saving diagnosis in air-conditioning systems based on data mining. The method mainly includes seven steps: (1) data collection, (2) data preprocessing, (3) recognition of variable-speed equipment, (4) recognition of system operation mode, (5) regression analysis of energy consumption data, (6) constraints analysis of system running, and (7) energy-saving potential analysis. A case study with a complicated air-conditioning system coupled with an ice storage system demonstrated the effectiveness of the proposed method. Compared with the traditional OTI method, the data-mining-based method can provide a more comprehensive analysis of energy-saving potential with less time cost, although it strongly relies on data quality in all steps and lacks flexibility for diagnosing specific equipment for energy-saving potential analysis. The results can deepen the understanding of the operating data characteristics of air-conditioning systems.

scholarly journals Modifying Building Energy-Saving Design Based on Field Research into Climate Features and Local Residents’ Habits

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 442
Author(s):  
Xiaoyue Zhu ◽  
Bo Gao ◽  
Xudong Yang ◽  
Zhong Yu ◽  
Ji Ni
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Residential Buildings ◽  
Average Energy ◽  
Field Tests ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Local Conditions ◽  
Building Energy Saving ◽  
Average Energy Consumption

In China, a surging urbanization highlights the significance of building energy conservation. However, most building energy-saving schemes are designed solely in compliance with prescriptive codes and lack consideration of the local situations, resulting in an unsatisfactory effect and a waste of funds. Moreover, the actual effect of the design has yet to be thoroughly verified through field tests. In this study, a method of modifying conventional building energy-saving design based on research into the local climate and residents’ living habits was proposed, and residential buildings in Panzhihua, China were selected for trial. Further, the modification scheme was implemented in an actual project with its effect verified by field tests. Research grasps the precise climate features of Panzhihua, which was previously not provided, and concludes that Panzhihua is a hot summer and warm winter zone. Accordingly, the original internal insulation was canceled, and the shading performance of the windows was strengthened instead. Test results suggest that the consequent change of SET* does not exceed 0.5 °C, whereas variations in the energy consumption depend on the room orientation. For rooms receiving less solar radiation, the average energy consumption increased by approximately 20%, whereas for rooms with a severe western exposure, the average energy consumption decreased by approximately 11%. On the other hand, the cost savings of removing the insulation layer are estimated at 177 million RMB (1 USD ≈ 6.5 RMB) per year. In conclusion, the research-based modification method proposed in this study can be an effective tool for improving building energy efficiency adapted to local conditions.

scholarly journals Energy Saving Potential from Shading Design for Residential House in Rural Area

2018 ◽  
Vol 164 ◽  
pp. 01007
Author(s):  
Dany Perwita Sari ◽  
Yun-shang Chiou
Keyword(s):  
Energy Saving ◽  
Rural Area ◽  
Energy Savings ◽  
Simulation Analysis ◽  
Residential Buildings ◽  
Substantial Impact ◽  
Energy Saving Potential ◽  
Key Factor ◽  
Residential House ◽  
Shading Devices

There are some architectural factors in the energy saving design of residential houses in Taiwan. In addition, in rural area, window glazing is a key factor to reducing electricity. For these purposes, a simulation model of exterior shading has been done in this study. Various types of shading devices have been analysed and compared in terms of energy savings. Simulation analysis by DesignBuilder reveals that shading devices has substantial impact to minimizing energy consumption. The results derived in this paper could provide useful suggestions for the shading design of residential buildings at rural area in Taiwan.

scholarly journals Demand Control Strategies of a PCM Enhanced Ventilation System for Residential Buildings

2020 ◽  
Vol 10 (12) ◽  
pp. 4336
Author(s):  
Yue Hu ◽  
Per Kvols Heiselberg ◽  
Tine Steen Larsen
Keyword(s):  
New York ◽  
Energy Storage ◽  
Energy Saving ◽  
Energy Savings ◽  
Control Strategies ◽  
Residential Buildings ◽  
Ventilation System ◽  
Airflow Rate ◽  
Energy Saving Potential ◽  
Demand Control

A ventilated window system enhanced by phase change material (PCM) has been developed, and its energy-saving potential examined in previous works. In this paper, the ventilation control strategies are further developed, to improve the energy-saving potential of the PCM energy storage. The influence of ventilation airflow rate on the energy-saving potential of the PCM storage is firstly studied based on an EnergyPlus model of a sustainable low energy house located in New York. It shows that in summer, the optimized ventilation airflow rate is 300 m3/h. The energy-saving of utilizing a ventilated window with PCM energy storage is 10.1% compared to using a stand-alone ventilated window, and 12.0% compared to using a standard window. In winter, the optimized ventilation airflow rate is 102 m3/h. The energy-saving of utilizing a ventilated window with PCM energy storage is 26.6% compared to using a stand-alone ventilated window, and 32.8% compared to using a standard window. Based on the optimized ventilation airflow rate, a demand control ventilation strategy, which personalizes the air supply and heat pump setting based on the demand of each room, is proposed and its energy-saving potential examined. The results show that the energy savings of using demand control compared to a constant ventilation airflow rate in the house is 14.7% in summer and 30.4% in winter.

Study on movable light-shelf system with location-awareness technology for lighting energy saving

2016 ◽  
Vol 26 (6) ◽  
pp. 796-812 ◽  
Author(s):  
Heangwoo Lee ◽  
Sang-hoon Gim ◽  
Janghoo Seo ◽  
Yongseong Kim
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Energy Savings ◽  
Full Scale ◽  
Location Awareness ◽  
Energy Saving Potential ◽  
Recent Increase ◽  
Lighting Energy ◽  
External Conditions ◽  
Incoming Light

Various ongoing studies regard light-shelves as one solution to the recent increase in lighting energy consumption. However, in previous light-shelf systems, the direction of incoming light was determined by external conditions, thereby limiting the efficiency of lighting energy saving. The purpose of the present study was to develop a movable light-shelf system with location-awareness technology and verify its performance. In this study, a full-scale testbed was established in order to test the proposed movable light-shelf system with location awareness as well as to verify its energy saving potential. The results were analysed and compared with the performances of previous fixed (Case 1) and movable (Case 2) light-shelf systems without location-awareness technology. The obtained results were as follows. (1) The proposed light-shelf system can respond to external conditions and to the location of the occupant by means of the control axis of the light-shelf module angle through modulation between the control axis of the angle of the previous light-shelf and the reflector of the light-shelf. (2) The proposed light-shelf system provides 90.0% and 86.6%/91.0% energy savings in comparison to Case 1 and Case 2, respectively.

Analysis for Energy Savings Potential and Economics of Combined Air-Conditioning System with Temperature and Humidity Decoupled Treatment

2011 ◽  
Vol 280 ◽  
pp. 71-75
Author(s):  
Zhong Chao Zhao ◽  
Dong Hui Zhang ◽  
Yu Ping Chen
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Air Conditioning ◽  
Energy Savings ◽  
Operating Cost ◽  
Air Conditioning System ◽  
Operation Mechanism ◽  
Energy Saving Potential ◽  
Temperature And Humidity

In this paper, the operation mechanism of combined air-conditioning system with temperature and humidity decoupled treatment (CACSTHDT) was presented, and the energy saving potential and economics of CACSTHDT were primarily analyzed through compared with a traditional air-conditioning system. The results indicated that CACSTHDT could save up to 28.64% energy consumption in comparison with a traditional air-conditioning system. The operating cost in one summer only was 71.36% of that cost of traditional air-conditioning system.

Research on the Energy Saving Potential of Official Cars in China

2011 ◽  
Vol 128-129 ◽  
pp. 1217-1221
Author(s):  
Quan Le Liu ◽  
Wei Chen
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Fuel Efficiency ◽  
High Energy ◽  
Maintenance Cost ◽  
Strategy Method ◽  
Energy Saving Potential ◽  
Energy Consuming

The quantity of official cars increased with the speed exceeding 20% every year which need much more energy be consumed to meet the official car needs. To investigate the energy saving potential of official cars in China, This paper introduced the strategy method with systemic viewpoint to reduce official cars energy consumption through analyzing the reason of high energy consuming of official cars. The resulted showed that only reduce the quantities and maintenance cost, and decline the displacement and using frequency can realize fuel efficiency of official cars.

Sign in / Sign up

Export Citation Format

Share Document