scholarly journals Energy Saving Potential from Shading Design for Residential House in Rural Area

2018 ◽  
Vol 164 ◽  
pp. 01007
Author(s):  
Dany Perwita Sari ◽  
Yun-shang Chiou
Keyword(s):  
Energy Saving ◽  
Rural Area ◽  
Energy Savings ◽  
Simulation Analysis ◽  
Residential Buildings ◽  
Substantial Impact ◽  
Energy Saving Potential ◽  
Key Factor ◽  
Residential House ◽  
Shading Devices

There are some architectural factors in the energy saving design of residential houses in Taiwan. In addition, in rural area, window glazing is a key factor to reducing electricity. For these purposes, a simulation model of exterior shading has been done in this study. Various types of shading devices have been analysed and compared in terms of energy savings. Simulation analysis by DesignBuilder reveals that shading devices has substantial impact to minimizing energy consumption. The results derived in this paper could provide useful suggestions for the shading design of residential buildings at rural area in Taiwan.

scholarly journals Demand Control Strategies of a PCM Enhanced Ventilation System for Residential Buildings

2020 ◽  
Vol 10 (12) ◽  
pp. 4336
Author(s):  
Yue Hu ◽  
Per Kvols Heiselberg ◽  
Tine Steen Larsen
Keyword(s):  
New York ◽  
Energy Storage ◽  
Energy Saving ◽  
Energy Savings ◽  
Control Strategies ◽  
Residential Buildings ◽  
Ventilation System ◽  
Airflow Rate ◽  
Energy Saving Potential ◽  
Demand Control

A ventilated window system enhanced by phase change material (PCM) has been developed, and its energy-saving potential examined in previous works. In this paper, the ventilation control strategies are further developed, to improve the energy-saving potential of the PCM energy storage. The influence of ventilation airflow rate on the energy-saving potential of the PCM storage is firstly studied based on an EnergyPlus model of a sustainable low energy house located in New York. It shows that in summer, the optimized ventilation airflow rate is 300 m3/h. The energy-saving of utilizing a ventilated window with PCM energy storage is 10.1% compared to using a stand-alone ventilated window, and 12.0% compared to using a standard window. In winter, the optimized ventilation airflow rate is 102 m3/h. The energy-saving of utilizing a ventilated window with PCM energy storage is 26.6% compared to using a stand-alone ventilated window, and 32.8% compared to using a standard window. Based on the optimized ventilation airflow rate, a demand control ventilation strategy, which personalizes the air supply and heat pump setting based on the demand of each room, is proposed and its energy-saving potential examined. The results show that the energy savings of using demand control compared to a constant ventilation airflow rate in the house is 14.7% in summer and 30.4% in winter.

A Study on Sun Shading Reconstruction Design of Residential Buildings in Chongqing City

2014 ◽  
Vol 953-954 ◽  
pp. 1481-1487
Author(s):  
Liu Jin
Keyword(s):  
Energy Saving ◽  
Personal Experience ◽  
Design Pattern ◽  
Simulation Analysis ◽  
Residential Buildings ◽  
Residential Building ◽  
Specific Time ◽  
High Rise ◽  
Time Period ◽  
Chongqing City

Windows energy saving design of residential buildings has increasingly got the attention of people. Through a large number of surveys and analysis of residential buildings in Chongqing and consumers personal experience, the author finds problems and deficiency, and then proposes principles of residential buildings sun shading reconstruction in Chongqing city. Taking the high-rise residential building of one university in Chongqing as reconstruction sample, selecting a specific time period, the author recalculates sun shading coefficient with and without sun shading by using Ecotect software to do simulation analysis. Finally, the reasonable reconstruction design pattern is put forward through cases. Keywords: Buildings Sun Shading, Sun Shading Reconstruction, Energy Saving

scholarly journals Energy saving potential of occupancy sensors in intermittent-use space types.

2021 ◽  
Author(s):  
◽  
Georgia Alexander
Keyword(s):  
Time Delay ◽  
Energy Saving ◽  
Energy Use ◽  
Energy Savings ◽  
Cost Savings ◽  
Sensor Technology ◽  
Building Industry ◽  
User Survey ◽  
User Perceptions ◽  
Energy Saving Potential

<p>For decades, studies have been suggesting the idea of occupancy sensors in intermittent use spaces for energy savings. This work investigates the potential energy savings of occupancy sensors in hallways, stairwells, seminar rooms and lavatories of an education building. Lighting is one of the largest consumers of energy in the building industry and these space types are often fully illuminated for long periods of vacancy. Lighting is for the user, not the building. Discussions centre around light use habits, energy saving behaviours and sensor technology such as time delay and daylight sensors. The experiment uses wireless light sensors and PIR sensors to measure light energy use and occupant use of 20 intermittent use spaces. A user survey was planned to run alongside the experiment to investigate user perceptions of changes in lighting but was discontinued due to unresolved software issues. Results of the experiment encouraged the use of occupancy sensors in intermittent use spaces. Lavatories attained highest energy saving potential 54%, seminar rooms highest annual cost savings per fitting $15.47 and highest annual energy savings 482kWh and hallways calculated the quickest payback of 8.6 years. Hallways, stairwells, seminar rooms and lavatories all offer potential for energy savings, supporting the theoretical ideas and success of occupancy sensors in intermittent use spaces.</p>

scholarly journals Field Study Of A Radiant Heating System For Sleep Thermal Comfort And Potential Energy Saving

2021 ◽  
Author(s):  
Christopher L. K. Wang
Keyword(s):  
Potential Energy ◽  
Thermal Comfort ◽  
Energy Saving ◽  
Energy Savings ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Thermal Conditions ◽  
Heating System ◽  
The Body ◽  
Radiant Temperature

As sleep is unconscious, the traditional definition of thermal comfort with conscious judgment does not apply. In this thesis sleep thermal comfort is defined as the thermal condition which enables sleep to most efficiently rejuvenate the body and mind. A comfort model was developed to stimulate the respective thermal environment required to achieve the desired body thermal conditions and a new infrared sphere method was developed to measure mean radiant temperature. Existing heating conditions according to building code conditions during sleeping hours was calculated to likely overheat a sleeping person and allowed energy saving potential by reducing nighttime heating set points. Experimenting with existing radiantly and forced air heated residential buildings, it was confirmed that thermal environment was too hot for comfortable sleep and that the infrared sphere method shows promise. With the site data, potential energy savings were calculated and around 10% of energy consumption reduction may be achieved during peak heating.

scholarly journals CASE STUDY OF ENERGY CONSERVATION IN INDUSTRY BY APPLICATION OF LEAN TOOLS

2021 ◽  
Vol 5 (12) ◽  
Author(s):  
N.Sujith Prasanna ◽  
Dr.J.Nagesh Kumar
Keyword(s):  
Energy Conservation ◽  
Energy Saving ◽  
Energy Cost ◽  
Energy Use ◽  
Energy Savings ◽  
Sustainable Manufacturing ◽  
Integrated Approach ◽  
Energy Saving Potential ◽  
Lean Tools

Energy cost is significant in many of the manufacturing activities. The efficiency of energy use is quiet low as there are substantial visible and hidden losses. Visible losses can be easily identified and corrective action can be taken. However hidden and indirect losses form a sizeable portion of the losses. Identifying these losses is not easy and requires an integrated approach which includes thorough study of process, operations and their interactions with energy use. Industries across sectors have implemented lean management principles which target various wastes occurring in the plant. This paper discusses case studies which highlight the exploitation of lean tools as a means for unearthing hidden energy saving potential that often go unnoticed. In addition to the energy savings which results in improved profits and competitiveness, the approach also aids the industry to pursue a path of sustainable manufacturing.

The Optimum Energy Saving Measures for Retrofitting Residential Buildings

2016 ◽  
Vol 41 (1) ◽  
pp. 88-92
Author(s):  
Rong-Yue Zheng ◽  
Jian Yao
Keyword(s):  
Energy Saving ◽  
Energy Savings ◽  
Residential Buildings ◽  
Thermal Conditions ◽  
High Energy ◽  
Cold Winter ◽  
Efficiency Measures ◽  
Optimum Energy ◽  
Potential Energy Saving ◽  
Selection Of

A large number of residential buildings in hot summer and cold winter zone of China are non-energy efficient with poor indoor thermal conditions. Retrofitting residential buildings with energy efficiency measures is thus important for residents. However, this work progressed slowly because practically applicable measures that not only have high energy savings but also improve indoor thermal performance have not been studied. Thus, this paper carried out a simulation study on the selection of suitable energy saving measures for residential buildings in hot summer and cold winter zone of China. Five potential energy saving options are considered and the energy, indoor thermal comfort and economic performance are compared. The results show that adding movable solar shades is the optimum option with all performance indices ranking first. Meanwhile, this measure is also the only acceptable energy saving solution for residents since its payback period is less than the lifespan of a building. As a conclusion, it is recommended to use movable solar shades as a first priority when retrofitting residential buildings.

scholarly journals Modeling Nearly Zero Energy Buildings for Sustainable Development in Rural Areas

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2593 ◽  
Author(s):  
Reza Khakian ◽  
Mehrdad Karimimoshaver ◽  
Farshid Aram ◽  
Soghra Zoroufchi Benis ◽  
Amir Mosavi ◽  
...  
Keyword(s):  
Energy Saving ◽  
Rural Areas ◽  
Residential Buildings ◽  
Building Design ◽  
Energy Performance ◽  
Payback Period ◽  
Zero Energy ◽  
Multiple Parameters ◽  
Shading Devices ◽  
The Impact

The energy performance of buildings and energy-saving measures have been widely investigated in recent years. However, little attention has been paid to buildings located in rural areas. The aim of this study is to assess the energy performance of two-story residential buildings located in the mountainous village of Palangan in Iran and to evaluate the impact of multiple parameters, namely building orientation, window-to-wall ratio (WWR), glazing type, shading devices, and insulation, on its energy performance. To attain a nearly zero energy building design in rural areas, the building is equipped with photovoltaic modules. The proposed building design is then economically evaluated to ensure its viability. The findings indicate that an energy saving of 29% can be achieved compared to conventional buildings, and over 22 MWh of electricity can be produced on an annual basis. The payback period is assessed at 21.7 years. However, energy subsidies are projected to be eliminated in the near future, which in turn may reduce the payback period.

Study on movable light-shelf system with location-awareness technology for lighting energy saving

2016 ◽  
Vol 26 (6) ◽  
pp. 796-812 ◽  
Author(s):  
Heangwoo Lee ◽  
Sang-hoon Gim ◽  
Janghoo Seo ◽  
Yongseong Kim
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Energy Savings ◽  
Full Scale ◽  
Location Awareness ◽  
Energy Saving Potential ◽  
Recent Increase ◽  
Lighting Energy ◽  
External Conditions ◽  
Incoming Light

Various ongoing studies regard light-shelves as one solution to the recent increase in lighting energy consumption. However, in previous light-shelf systems, the direction of incoming light was determined by external conditions, thereby limiting the efficiency of lighting energy saving. The purpose of the present study was to develop a movable light-shelf system with location-awareness technology and verify its performance. In this study, a full-scale testbed was established in order to test the proposed movable light-shelf system with location awareness as well as to verify its energy saving potential. The results were analysed and compared with the performances of previous fixed (Case 1) and movable (Case 2) light-shelf systems without location-awareness technology. The obtained results were as follows. (1) The proposed light-shelf system can respond to external conditions and to the location of the occupant by means of the control axis of the light-shelf module angle through modulation between the control axis of the angle of the previous light-shelf and the reflector of the light-shelf. (2) The proposed light-shelf system provides 90.0% and 86.6%/91.0% energy savings in comparison to Case 1 and Case 2, respectively.

Analysis of Electrical Energy Savings From Daylighting Through Skylights

Solar Energy ◽  
2005 ◽  
Author(s):  
Abdelkarim Nemri ◽  
Moncef Krarti
Keyword(s):  
Energy Use ◽  
Energy Savings ◽  
Simulation Analysis ◽  
Control Strategies ◽  
Electrical Energy ◽  
Office Building ◽  
Analysis Tool ◽  
Energy Saving Potential ◽  
Lighting Energy ◽  
The Impact

This paper provides a simplified analysis tool to assess the energy saving potential of daylighting for commercial buildings through skylights. Specifically, the impact of daylighting is investigated for various fenestration opening sizes, glazing types, control strategies, and geographic locations. A top floor of a prototypical office building has been considered in the analysis. The results obtained for the office building can be applied to other types of buildings such as retails stores, schools, and warehouses. Based on the simulation analysis results, it was determined that skylight to floor ratio more than 0.3 does not affect significantly the lighting energy savings. An optimum value of skylight to floor area ratio was found to be 0.2 to minimize the annual total building energy use.

scholarly journals Impact of Wall Constructions on Energy Performance of Switchable Insulation Systems

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 6068
Author(s):  
Remy Carlier ◽  
Mohammad Dabbagh ◽  
Moncef Krarti
Keyword(s):  
Energy Savings ◽  
Simulation Analysis ◽  
Residential Buildings ◽  
Energy Performance ◽  
Space Heating ◽  
Thermal Mass ◽  
Analysis Tool ◽  
Insulation Systems ◽  
Detached House ◽  
Modeling Strategy

This paper evaluates the potential energy savings when switchable insulation systems (SIS) are applied to walls of residential buildings located in Belgium and other locations in Europe. The study considers two low-energy prototypical dwellings (an apartment and a detached house) that are representative of post-2010 constructions and renovations in Belgium. Using an 3R2C-based analysis tool, the performance of both dwellings is evaluated with static and dynamic wall insulation systems. First, the switchable insulating system is described along with its associated simple 2-step rule-based control strategy. Then the modeling strategy and simulation analysis tools are presented. In Belgium, it was found that SIS-integrated walls allow energy savings up to 3.7% for space heating and up to 98% for cooling. Moreover, it was found that to further reduce the energy consumption of SIS-integrated buildings in various European climates, thermal mass placement needs to be considered. By optimizing the placement and the parameters of the various wall layers, it is possible to increase the space heating savings by up to a factor of 4 and those of cooling by up to a factor of 2.5.

Sign in / Sign up

Export Citation Format

Share Document