Convective Flow in Annuli of Stationary and Rotating Horizontal Cylinders

1997 ◽  
Author(s):  
T. S. Lee
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Cooling System ◽  
Cylindrical Annulus ◽  
Receiver System ◽  
The Mean ◽  
Effects Of Rotation

Heat transfer and fluid flow processes in enclosed spaces have been extensively studied due to their importance in energy conversion, storage and transmission systems. Concentric and eccentric annular geometries are most commonly encountered in solar collector-receiver system, cooling system in nuclear reactors etc. For mixed flow in the annulus between concentric or eccentric cylinders in a rotating system, most work were performed for the cases of vertical cylindrical annulus. More recently, the effects of recirculation on the natural convection between the annular region in horizontal rotating cylinders have become a topic of interest to researchers. The applications of these studies include food processing and the interest in seeking improved methods for crystallographic perfection in industrial processes, above studies are for air with Pr≅1.0. However, other effects of rotation on heat transfer characteristics for low Prandtl number fluids are encountered in high power electric machines with heated shafts, such as a mercury slip ring assembly. For the present study, natural convection is driven by vertical temperature gradient and vertical gravity force. The interaction with the effect of rotation of the inner cylinder is expected to lead to complicated flows. Studies show that the mean Nusselt number increases with Rayleigh number. At a Prandtl number of order 1.0 with a fixed Rayleigh number, when the inner cylinder is made to rotate, the mean Nusselt number decreases through out the flow. At lower Prandtl number of the order 0.1 to 0.01, the mean Nusselt number remained fairly constant with respect to the rotational Reynolds number.

scholarly journals Natural convection of Newtonian fluids between two concentric cylinders of a special cross-sectional form

2020 ◽  
pp. 190-190
Author(s):  
Houssem Laidoudi ◽  
Mustapha Helmaoui ◽  
Mohamed Bouzit ◽  
Abdellah Ghenaim
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Inclination Angle ◽  
Average Nusselt Number ◽  
Outer Cylinder ◽  
Cross Sectional ◽  
The Mean

In this paper, we performed a numerical simulation of natural convection of Newtonian fluids between two cylinders of different cross-sectional form. The inner cylinder is supposed to be hot and the outer cylinder is assumed to be cold. The diameter of inner cylinder to the diameter of outer cylinder defines the radii ratio (RR= 2.5). The governing equations describing the physical behavior of fluid flow and heat transfer are solved using finite volume method. The effects of Prandtl number (Pr = 0.71 to 100), Rayleigh number (Ra = 103 to 105) and inclination angle of inner cylinder (? = 0? to 80?) on streamlines, isotherms and dimensionless velocity are presented and discussed. Also, the mean average Nusselt number of inner cylinder is plotted versus the governing parameters. All present simulations are considered in two-dimensions for steady laminar flow regime. The obtained results showed that the flow between cylinders is more stable for the inclination angle ? = 0?. Increase in Rayleigh number increases the heat transfer rate for all values of inclination angle. Furthermore, the effect of Prandtl number on the mean average Nusselt number becomes negligible when Pr is over the value 7.01. For example at Pr = 0.71 and Ra =105, increase in inclination from 0? to 40?decreases the average Nusselt number by 5.4%. A new correlation is also provided to describe the average Nusselt number as function of Pr and Ra at ? = 0?.

Towards numerical computation of double-diffusive natural convection within an eccentric horizontal cylindrical annulus

2016 ◽  
Vol 26 (5) ◽  
pp. 1346-1364 ◽  
Author(s):  
Chahinez Ghernoug ◽  
Mahfoud Djezzar ◽  
Hassane Naji ◽  
Abdelkarim Bouras
Keyword(s):  
Mass Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Content Type ◽  
Cylindrical Annulus ◽  
Buoyancy Ratio ◽  
Convective Mode ◽  
Double Diffusive

Purpose – The purpose of this paper is to numerically study the double-diffusive natural convection within an eccentric horizontal cylindrical annulus filled with a Newtonian fluid. The annulus walls are maintained at uniform temperatures and concentrations so as to induce aiding thermal and mass buoyancy forces within the fluid. For that, this simulation span a moderate range of thermal Rayleigh number (100RaT100,000), Lewis (0.1Le10), buoyancy ratio (0N5) and Prandtl number (Pr=0.71) to examine their effects on flow motion and heat and mass transfers. Design/methodology/approach – A finite volume method in conjunction with the successive under-relaxation algorithm has been developed to solve the bipolar equations. These are written in dimensionless form in terms of vorticity, stream function, temperature and concentration. Beforehand, the implemented computer code has been validated through already published findings in the literature. The isotherms, streamlines and iso-concentrations are exhibited for various values of Rayleigh and Lewis numbers, and buoyancy ratio. In addition, heat and mass transfer rates in the annulus are translated in terms of Nusslet and Sherwood numbers along the enclosure’s sides. Findings – It is observed that, for the range of parameters considered here, the results show that the average Sherwood number increases with, while the average Nusselt number slightly dips as the Lewis number increases. It is also found that, under the convective mode, the local Nusselt number (or Sherwood) increases with the buoyancy ratio. Likewise, according to Lewis number’s value, the flow pattern is either symmetric and stable or asymmetric and random. Besides that, the heat transfer is transiting from a conductive mode to a convective mode with increasing the thermal Rayleigh number, and the flow structure and the rates of heat and mass transfer are significantly influenced by this parameter. Research limitations/implications – The range of the Rayleigh number considered here covers only the laminar case, with some constant parameters, namely the Prandtl number (Pr = 0.71), and the tilt angle (α=90°). The analysis here is only valid for steady, two-dimensional, laminar and aiding flow within an eccentric horizontal cylindrical annulus. This motivates further investigations involving other relevant parameters as N (opposite flows), Ra, Pr, Le, the eccentricity, the tilt angle, etc. Practical implications – An original framework for handling the double-diffusive natural convection within annuli is available, based on the bipolar equations. In addition, the achievement of this work could help researchers design thermal systems supported by annulus passages. Applications of the results can be of value in various arrangements such as storage of liquefied gases, electronic cable cooling systems, nuclear reactors, underground disposal of nuclear wastes, manifolds of solar energy collectors, etc. Originality/value – Given the geometry concerned, the bipolar coordinates have been used to set the inner and outer walls boundary conditions properly without interpolation. In addition, since studies on double-diffusive natural convection in annuli are lacking, the obtained results may be of interest to handle other configurations (e.g., elliptical-shaped speakers) with other boundary conditions.

scholarly journals Enhancement of natural convection heat transfer in a U-shaped cavity filled with Al2O3-water nanofluid

2012 ◽  
Vol 16 (5) ◽  
pp. 1317-1323 ◽  
Author(s):  
Ching-Chang Cho ◽  
Her-Terng Yau ◽  
Cha’o-Kuang Chen
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Heated Wall ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
The Mean

This paper investigates the natural convection heat transfer enhancement of Al2O3-water nanofluid in a U-shaped cavity. In performing the analysis, the governing equations are modeled using the Boussinesq approximation and are solved numerically using the finite-volume numerical method. The study examines the effects of the nanoparticle volume fraction, the Rayleigh number and the geometry parameters on the mean Nusselt number. The results show that for all values of the Rayleigh number, the mean Nusselt number increases as the volume fraction of nanoparticles increases. In addition, it is shown that for a given length of the heated wall, extending the length of the cooled wall can improve the heat transfer performance.

A Numerical Study of the Simultaneous Natural Convective Heat Transfer From the Upper and Lower Surfaces of a Thin Isothermal Horizontal Circular Plate

2016 ◽  
Author(s):  
Patrick H. Oosthuizen ◽  
Abdulrahim Kalendar
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate ◽  
The Mean ◽  
Adiabatic Section

Natural convective heat transfer from the top and bottom surfaces of a thin circular isothermal horizontal plate which, in general, has a centrally placed adiabatic section has been numerically investigated. The temperature of the plate surfaces is higher than the temperature of the surrounding fluid. The range of conditions considered is such that laminar, transitional, and turbulent flow occurs over the plate. The heat transfer from the upper and lower surfaces of the plate as well as the mean heat transfer rate from the entire surface of the plate have been considered. The flow has been assumed to be axisymmetric and steady. The k-epsilon turbulence model with account being taken of buoyancy force effects has been used and the solution has been obtained using the commercial CFD solver ANSYS FLUENT©. The heat transfer rate from the heated plate has been expressed in terms of a Nusselt number based on the outside plate diameter and the difference between the plate temperature and the fluid temperature far from the plate. The mean Nusselt number is dependent on the Rayleigh number, the ratio of the diameter of the inner adiabatic section to the outer plate diameter, and the Prandtl number. Results have only been obtained for a Prandtl number of 0.74, i.e., effectively the value for air. The variations of the mean Nusselt number averaged over both the upper and lower surfaces and of the mean Nusselt numbers for the upper surface and for the lower surface with Rayleigh number for various adiabatic section diameter ratios have been studied. The use of a reference length scale to allow the correlation of these mean Nusselt number-Rayleigh number variations has been investigated.

Prandtl Number Dependence of Natural Convection in Porous Media

1987 ◽  
Vol 109 (2) ◽  
pp. 371-377 ◽  
Author(s):  
T. Jonsson ◽  
I. Catton
Keyword(s):  
Heat Transfer ◽  
Stainless Steel ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Horizontal Layer ◽  
Silicon Oil ◽  
Bed Height ◽  
Oil Water ◽  
Convection In Porous Media

The effect of Prandtl number of a medium on heat transfer across a horizontal layer was measured. Stainless steel particles of diameters 1.6, 3.2, and 4.8 mm, glass particles of diameters 2.5 and 6.00 mm, and lead particles of diameter 0.95 mm were used with silicon oil, water, and mercury as working fluids. The bed height was varied from 2.5 to 12 cm. Experimental results are presented showing Nusselt number as a function of medium Rayleigh number with the effective Prandtl number, defined as the product of medium Prandtl number and Kozeny–Carmen constant, serving as a parameter. Correlations for Nusselt number are given for effective Prandtl number less than 0.1 and for effective Prandtl number greater than 0.1, which corresponds to an infinite effective Prandtl number. For the steel–water case the wavenumber is shown as a function of medium Rayleigh number.

Heat transfer to pulsating turbulent flow in an abrupt pipe expansion

2003 ◽  
Vol 13 (3) ◽  
pp. 286-308 ◽  
Author(s):  
S.A.M. Said ◽  
M.A. Habib ◽  
M.O. Iqbal
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Prandtl Number ◽  
Turbulent Flow ◽  
Pulsation Frequency ◽  
Pipe Expansion ◽  
Cent Increase ◽  
The Mean ◽  
Mean Time

A numerical investigation aimed at understanding the flow and heat transfer characteristics of pulsating turbulent flow in an abrupt pipe expansion was carried out. The flow patterns are classified by four parameters; the Reynolds number, the Prandtl number, the abrupt expansion ratio and the pulsation frequency. The influence of these parameters on the flow was studied in the range 104<Re<5×104, 0.7<Pr<7.0, 0.2<d/D<0.6 and 5<f<35. It was found that the influence of pulsation on the mean time‐averaged Nusselt number is insignificant (around 10 per cent increase) for fluids having a Prandtl number less than unity. This effect is appreciable (around 30 per cent increase) for fluids having Prandtl number greater than unity. For all pulsation frequencies, the variation in the mean time‐averaged Nusselt number, maximum Nusselt number and its location with Reynolds number and diameter ratio exhibit similar characteristics to steady flows.

A Numerical Study of Natural Convection in a Cavity With Two Fins Attached to Its Vertical Walls

2007 ◽  
Author(s):  
G. A. Sheikhzadeh ◽  
M. Pirmohammadi ◽  
M. Ghassemi
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Square Cavity ◽  
Vertical Walls ◽  
The Mean ◽  
Energy Equations ◽  
Rayleigh Numbers

Numerical study natural convection heat transfer inside a differentially heated square cavity with adiabatic horizontal walls and vertical isothermal walls is investigated. Two perfectly conductive thin fins are attached to the isothermal walls. To solve the governing differential mass, momentum and energy equations a finite volume code based on Pantenkar’s simpler method is developed and utilized. The results are presented in form of streamlines, isotherms as well as Nusselt number for Rayleigh number ranging from 104 up to 107. It is shown that the mean Nusselt number is affected by the position of the fins and length of the fins as well as the Rayleigh number. It is also observed that maximum Nusselt number occurs about the middle of the enclosure where Lf is grater the 0.5. In addition the Nusselt number stays constant and does not varies with width of the cavity (lf) when Lf is equal to 0.5 and Rayleigh number is equal to 104 and 107 as well as when Lf is equal to 0.6 and low Rayleigh numbers.

scholarly journals Prediction of Natural Convection Heat Transfer Phenomena of Nanofluids in Corrugated Annulus

2020 ◽  
Author(s):  
Sattar Aljobair ◽  
Akeel Abdullah Mohammed ◽  
Israa Alesbe
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Outer Cylinder ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Convection Heat

Abstract The natural convection heat transfer and fluid flow characteristic of water based Al2O3 nano-fluids in a symmetrical and unsymmetrical corrugated annulus enclosure has been studied numerically using CFD. The inner cylinder is heated isothermally while the outer cylinder is kept constant cold temperature. The study includes eight models of corrugated annulus enclosure with constant aspect ratio of 1.5. The governing equations of fluid motion and heat transfer are solved using stream-vorticity formulation in curvilinear coordinates. The range of solid volume fractions of nanoparticles extends from PHI=0 to 0.25, and Rayleigh number varies from 104 to 107. Streamlines, isotherms, local and average Nusselt number of inner and outer cylinder has been investigated in this study. Sixty-four correlations have been deduced for the average Nusselt number for the inner and outer cylinders as a function of Rayleigh number have been deduced for eight models and five values of volume fraction of nano particles with an accuracy range 6-12 %. The results show that, the average heat transfer rate increases significantly as particle volume fraction and Rayleigh number increase. Also, increase the number of undulations in unsymmetrical annuli reduces the heat transfer rates which remain higher than that in symmetrical annuli. There is no remarkable change in isotherms contour with increase of volume fraction of nanofluid.

scholarly journals Simulation of Natural Convection Heat Transfer in a 2-D Trapezoidal Enclosure

2019 ◽  
Vol 16 (4) ◽  
pp. 7375-7390 ◽  
Author(s):  
K. Venkatadri ◽  
S. Abdul Gaffar ◽  
Ramachandra Prasad V. ◽  
B. Md. Hidayathulla Khan ◽  
O. Anwar Beg
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Vertical Wall ◽  
Convection Heat Transfer ◽  
Side Wall ◽  
Practical Applications ◽  
Wide Range ◽  
Trapezoidal Enclosure

Natural convection within trapezoidal enclosures finds significant practical applications. The natural convection flows play a prominent role in the transport of energy in energyrelated applications, in case of proper design of enclosures to achieve higher heat transfer rates. In the present study, a two-dimensional cavity with adiabatic right side wall is studied. The left side vertical wall is maintained at the constant hot temperature and the top slat wall is maintained at cold temperature. The dimensionless governing partial differential equations for vorticity-stream function are solved using the finite difference method with incremental time steps. The parametric study involves a wide range of Rayleigh number, Ra, 103 ≤ Ra ≤ 105 and Prandtl number (Pr = 0.025, 0.71 and 10). The fluid flow within the enclosure is formed with different shapes for different Pr values. The flow rate is increased by enhancing the Rayleigh number (Ra = 104 ). The numerical results are validated with previous results. The governing parameters in the present article, namely Rayleigh number and Prandtl number on flow patterns, isotherms as well as local Nusselt number are reported. 

scholarly journals Effect of Fin Length and Location on Natural Convection Heat Transfer in a Wavy Cavity

2020 ◽  
Vol 7 (3) ◽  
Author(s):  
M. Fayz-Al-Asad ◽  
M. J. H. Munshi ◽  
M.M.A. Sarker
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Flow Structure ◽  
Model Parameters ◽  
Flow And Heat Transfer ◽  
Wavy Cavity ◽  
Fin Length

The present study aims to analyze the natural convection flow and heat transfer in a wavy cavity with a single horizontal fin attached to its hot wall. Galerkin weighted residual finite element technique has been employed to solve the governing nonlinear dimensionless equations. The effects of model parameters like Rayleigh number, fin length and location on the fluid flow and heat transfer are investigated. The obtained results are exhibited graphically in terms of flow structure, temperature dispersion, velocity field, fin effectiveness, local Nusselt number, and average Nusselt number. It is observed that the different fin length and location have a substantial effect on flow structure and temperature field. Fin effectiveness is also studied and the highest fin effectiveness was found at fin length (L = 0.75). Besides, it is also found that the mean Nusselt number increases significantly with the increase of Rayleigh number and fin length. Wavy cavity becomes more effective on heat transfer behaviors and fluid flow than that of a square cavity.

Sign in / Sign up

Export Citation Format

Share Document