Application of the Magnetorheological Squeeze Film Dampers for Reducing Energy Losses in Supports of Rotors of Rotating Machines

2017 ◽  
Author(s):  
Jaroslav Zapoměl ◽  
Petr Ferfecki
Keyword(s):  
Mathematical Model ◽  
Dynamical Analysis ◽  
Squeeze Film ◽  
Energy Losses ◽  
Damping Force ◽  
Squeeze Film Damper ◽  
Damping Effect ◽  
Wide Range ◽  
Squeeze Film Dampers ◽  
Computational Procedures

Unbalance of rotating parts is the main source of excitation of lateral oscillations of rotors, of increase of time varying forces transmitted to the rotor stationary part, and of energy losses generated in the support elements. The technological solution, which makes it possible to reduce these undesirable effects, consists in adding damping devices to the rotor supports. A simple dynamical analysis shows that to achieve their optimum performance their damping effect must be adaptable to the current operating speed. This is enabled by magnetorheological squeeze film dampers, the damping effect of which is controlled by the change of magnetic flux passing through the lubricating layer. The developed mathematical model of the magnetorheological squeeze film damper is based on assumptions of the classical theory of lubrication and on representing the magnetorheological oil by a bilinear material. The results of the carried out computational simulations show that the appropriate control of the damping force makes it possible to minimize the energy losses in a wide range of operating speeds. The development of a new mathematical model of the magnetorheological squeeze film damper, the extension of computational procedures, in which this model has been implemented, the confirmation that the magnetorheological dampers make it possible to reduce energy losses in the rotor supports, and learning more on influence of controllable dampers on behavior of rotor systems are the principal contributions of the presented paper. The carried out research highlights the possibility of reducing the energy losses by means of employing magnetorheological squeeze film dampers, which represents a new field of their prospective application.

The Oscillation Attenuation of an Accelerating Jeffcott Rotor Damped by Magnetorheological Dampers Affected by the Delayed Yielding Phenomenon in the Lubricating Oil

2017 ◽  
Vol 140 (1) ◽  
Author(s):  
Jaroslav Zapoměl ◽  
Petr Ferfecki
Keyword(s):  
Mathematical Model ◽  
Shear Stress ◽  
Magnetic Induction ◽  
Transient Analysis ◽  
Lubricating Oil ◽  
Squeeze Film ◽  
Operating Speed ◽  
Squeeze Film Damper ◽  
Squeeze Film Dampers ◽  
Computational Procedures

Adding damping devices to the rotor supports is a frequently used technological solution for reducing vibrations of rotating machines. To achieve their optimum performance, their damping effect must be adaptable to the current operating speed. This is offered by magnetorheological squeeze film dampers. The magnetorheological oils are liquids sensitive to magnetic induction and belong to the class of fluids with a yielding shear stress. Their response to the change of a magnetic field is not instantaneous, but it is a process called the delayed yielding. The developed mathematical model of the magnetorheological squeeze film damper is based on the assumptions of the classical theory of lubrication. The lubricant is represented by a bilinear material, the yielding shear stress of which depends on magnetic induction. The delayed yielding process is described by a convolution integral with an exponential kernel. The developed mathematical model of the damper was implemented in the computational procedures for transient analysis of rotors working at variable operating speed. The carried-out simulations showed that the delayed yielding effect could have a significant influence on performance of magnetorheological damping devices. The development of a novel mathematical model of a magnetorheological squeeze film damper, the representation of the magnetorheological oil by bilinear material, taking the delayed yielding phenomenon into consideration, increased numerical stability of the computational procedures for transient analysis of flexible rotors, and extension of knowledge on behavior of rotor systems damped by magnetorheological squeeze film dampers are the principal contributions of this paper.

Design of Nonlinear Squeeze-Film Dampers for Aircraft Engines

1977 ◽  
Vol 99 (1) ◽  
pp. 57-64 ◽  
Author(s):  
E. J. Gunter ◽  
L. E. Barrett ◽  
P. E. Allaire
Keyword(s):  
Reynolds Equation ◽  
Nonlinear Effects ◽  
Aircraft Engine ◽  
Squeeze Film ◽  
Aircraft Engines ◽  
Transient Method ◽  
Squeeze Film Damper ◽  
Wide Range ◽  
Squeeze Film Dampers ◽  
Bearing Stiffness

This paper examines the effect of squeeze-film damper bearings on the steady state and transient unbalance response of aircraft engine rotors. The nonlinear effects of the damper are examined, and the variance of the motion due to unbalance, static pressurization, retainer springs, and rotor preload is shown. The nonlinear analysis is performed using a time-transient method incorporating a solution of the Reynolds equation at each instant in time. The analysis shows that excessive stiffness in the damper results in large journal amplitudes and transmission of bearing forces to the engine casing which greatly exceed the unbalance forces. Reduction of the total effective bearing stiffness through static pressurization and rotor preload is considered. The reduction in stiffness allows the damping generated by the bearing to be more effective in attenuating rotor forces. It is observed that in an unpressurized damper, the dynamic transmissibility will exceed unity when the unbalance eccentricity exceeds approximately 50 percent of the damper clearance for the relatively wide range of conditions examined in this study.

scholarly journals Parameter Analysis of an Intershaft Dual-Rotor with the Application of Squeeze Film Dampers

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Huizheng Chen ◽  
Shun Zhong ◽  
Zhenyong Lu ◽  
Yushu Chen ◽  
Xiyu Liu
Keyword(s):  
Vibration Suppression ◽  
Rotor System ◽  
Parameter Analysis ◽  
Dynamical Analysis ◽  
Squeeze Film ◽  
Physical Parameters ◽  
Squeeze Film Damper ◽  
Rotor Systems ◽  
Squeeze Film Dampers ◽  
Frequency Curves

The squeeze film damper is usually adopted in the rotor system to suppress the vibrating motion of the rotor system. In this work, not only are the physical parameters of the squeeze film damper analyzed but also the system parameters, like the number of squeeze film dampers used and squeeze film damper implementation positions, are analyzed. The amplitude-frequency curves are obtained by conducting the simulation of a dual-rotor, intershaft, and oil film force concatenated model. Through the analysis and comparisons of the results, the vibration suppression effects of the squeeze film damper with different parameter configurations are analyzed and summarized. This work contributes to further optimization and dynamical analysis work on rotor systems with the application of the squeeze film damper.

Investigations of Transient Oscillations of Rotors Supported by Magnetorheological Squeeze Film Dampers Using Bilinear Material to Model the Lubricant

2016 ◽  
Vol 821 ◽  
pp. 309-316
Author(s):  
Jaroslav Zapoměl ◽  
Jan Kozánek ◽  
Petr Ferfecki
Keyword(s):  
Squeeze Film ◽  
Lateral Vibration ◽  
Technological Solution ◽  
Damping Force ◽  
Motion Equations ◽  
Damping Effect ◽  
Squeeze Film Dampers ◽  
Nonlinear Character ◽  
Operating Regimes ◽  
Transient Oscillations

Unbalance of rotors is one of the principal causes of their lateral vibration. A technological solution frequently used to its suppression consists in placing damping devices to the rotor supports. To achieve their optimum performance their damping effect must be controllable. This is offered by squeeze film dampers utilizing the magnetorheological phenomenon to control the damping force. In mathematical models magnetorheological oils are usually represented by Bingham or Herschel-Bulkley theoretical materials. Here the magnetorheological oil is modeled by bilinear material with the yielding shear stress depending on magnetic induction. Its flow curve is continuous which contributes to reducing nonlinear character of the motion equations. The new mathematical model was applied to investigate several operating regimes of rotating machines.

scholarly journals An Improved Squeeze Film Damper for Rotor Vibration Control: Theoretical Results

1994 ◽  
Author(s):  
J. Y. Zhao ◽  
I. W. Linnett ◽  
E. J. Hahn
Keyword(s):  
Operating Conditions ◽  
Outer Ring ◽  
Squeeze Film ◽  
Squeeze Film Damper ◽  
Constant Stiffness ◽  
Wide Range ◽  
Squeeze Film Dampers ◽  
Secondary Support ◽  
Stiffness And Damping ◽  
Theoretical Results

This paper proposes an improved squeeze film damper which will prevent the bistable operation associated with conventional squeeze film dampers at large unbalances and/or at small bearing parameters. It consists of a conventional squeeze film damper with a flexibly supported outer ring. This secondary flexible support is considered to be massless, and to have a constant stiffness and damping. The effectiveness of this damper in preventing bistable operation is investigated over a wide range of operating conditions for a rigid rotor supported on a centrally preloaded squeeze film damper. It is shown that depending on relevant parameters such as the stiffness ratio between the secondary support and the retaining spring, the damping coefficient of the support, and the mass ratio between the damper outer ring and the rotor, this proposed damper is very effective in preventing bistable operation even for high unbalance conditions.

scholarly journals A computational fluid dynamics investigation of the segmented integral squeeze film damper

2019 ◽  
Vol 254 ◽  
pp. 08005 ◽  
Author(s):  
Petr Ferfecki ◽  
Jaroslav Zapoměl ◽  
Marek Gebauer ◽  
Václav Polreich ◽  
Jiří Křenek
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Three Dimensional ◽  
Squeeze Film ◽  
Squeeze Film Damper ◽  
Ansys Cfx ◽  
Squeeze Film Dampers ◽  
Tilting Pad ◽  
Vibration Attenuation ◽  
Tilting Pad Journal Bearing

Rotor vibration attenuation is achieved with damping devices which work on different, often mutually coupled, physical principles. Squeeze film dampers are damping devices that have been widely used in rotordynamic applications. A new concept of a 5-segmented integral squeeze film damper, in which a flexure pivot tilting pad journal bearing is integrated, was investigated. The damper is studied for the eccentric position between the outer and inner ring of the squeeze film land. The ANSYS CFX software was used for solving the pressure and velocity distribution. The development of the complex three-dimensional computational fluid dynamics model of the squeeze film damper, learning more about the effect of the forces in the damper, and the knowledge about the behaviour of the flow are the principal contributions of this article.

Dynamic Analysis of a Coupled Dual-Rotor With Squeeze Film Damper Considering Sudden Unbalance

2021 ◽  
Author(s):  
Ying Cui ◽  
Yuxi Huang ◽  
Guogang Yang ◽  
Yongliang Wang ◽  
Han Zhang
Keyword(s):  
Steady State ◽  
Transient Response ◽  
Rotor System ◽  
Lubricating Oil ◽  
Squeeze Film ◽  
Radial Clearance ◽  
Oil Viscosity ◽  
Squeeze Film Damper ◽  
Damping Effect ◽  
Bistable State

Abstract A nonlinear multi-degree-of-freedom dynamic model of a coupled dual-rotor system with an intershaft bearing and uncentralized squeeze film damper is established by using finite element method. Based on the model, the critical speed characteristic diagram and vibration modes of the system were calculated. The steady-state unbalance response is obtained by using Newmark-β algorithm. The numerical results show the effect of SFD position in the dual-rotor system on response amplitude. It is found that with the decrease of radial clearance and the increase of length-diameter ratio and lubricating oil viscosity, the damping effect of SFD is enhanced and the bistable state phenomenon can be suppressed. The transient response of the system in case of sudden unbalance occurring at the fan was simulated by applying a step function. It is demonstrated that the SFD can effectively reduce the duration and maximum amplitude of the transient process, but at certain speeds, the SFD will increase the amplitude after the system returns to steady state, the damping effect on the transient response is also enhanced with the increase of length-diameter and the decrease of radial clearance, and with the increase of the sudden unbalance value, the response is more likely to stabilized at the high amplitude state of the bistable state.

scholarly journals Squeeze-Film Damper Technology: Part 1 — Prediction of Finite Length Damper Performance

1983 ◽  
Author(s):  
J. W. Lund ◽  
A. J. Smalley ◽  
J. A. Tecza ◽  
J. F. Walton
Keyword(s):  
Finite Length ◽  
Gas Turbines ◽  
Squeeze Film ◽  
Fluid Inertia ◽  
Inertia Effects ◽  
Strongly Coupled ◽  
Squeeze Film Damper ◽  
Rotor Systems ◽  
Squeeze Film Dampers ◽  
Calculation Results

Squeeze-film dampers are commonly used in gas turbine engines and have been applied successfully in a great many new designs, and also as retrofits to older engines. Of the mechanical components in gas turbines, squeeze-film dampers are the least understood. Their behavior is nonlinear and strongly coupled to the dynamics of the rotor systems on which they are installed. The design of these dampers is still largely empirical, although they have been the subject of a large number of past investigations. To describe recent analytical and experimental work in squeeze-film damper technology, two papers are planned. This abstract outlines the first paper, Part 1, which concerns itself with squeeze-film damper analysis. This paper will describe an analysis method and boundary conditions which have been developed recently for modelling dampers, and in particular, will cover the treatment of finite length, feed and drain holes and fluid inertia effects, the latter having been shown recently to be of great importance in predicting rotor system behavior. A computer program that solves the Reynolds equation for the above conditions will be described and sample calculation results presented.

Application of CFD Analysis for Rotating Machinery: Part 1 — Hydrodynamic, Hydrostatic Bearings and Squeeze Film Damper

2003 ◽  
Author(s):  
Zenglin Guo ◽  
Toshio Hirano ◽  
R. Gordon Kirk
Keyword(s):  
Traditional Method ◽  
Reasonable Agreement ◽  
Pressure Field ◽  
Squeeze Film ◽  
Cfd Analysis ◽  
Complex Flow ◽  
Static And Dynamic Characteristics ◽  
Squeeze Film Damper ◽  
Squeeze Film Dampers ◽  
Machinery Part

The traditional method for bearing and damper analysis usually involves a development of rather complicated numerical calculation programs that may just focus on a simplified and specific physical model. The application of the general CFD codes may make this analysis available and effective where complex flow geometries are involved or when more detailed solutions are needed. In this study, CFX-TASCflow is employed to simulate various fixed geometry fluid-film bearing and damper designs. Some of the capabilities in CFX-TASCflow are applied to simulate the pressure field and calculate the static and dynamic characteristics of hydrodynamic, hydrostatic and hybrid bearings as well as squeeze film dampers. The comparison between the CFD analysis and current computer programs used in industry has been made. The results show reasonable agreement in general. Some of possible reasons for the differences are discussed. It leaves room for further investigation and improvement on the methods of computation.

Sign in / Sign up

Export Citation Format

Share Document