Broadcast Feedback With Hysteresis Loop Control of Stochastically Behaving Cellular Units With Application to Cellular Shape Memory Alloy Actuators

2008 ◽  
Author(s):  
Levi Wood ◽  
Jun Ueda ◽  
H. Harry Asada
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Refractory Period ◽  
Time Lag ◽  
Hysteresis Loops ◽  
Control Law ◽  
Asymptotically Stable ◽  
Loop Control ◽  
Sma Actuators ◽  
Stable Control

This work develops a probability broadcast feedback controller for an ensemble of stochastically behaving cellular units exhibiting hysteresis. Previous work has developed asymptotically stable control laws for ideal on-off cellular units without any hysteresis or time lag. This work extends previous results by developing an asymptotically stable control law for an ensemble of cells that experience an arbitrary refractory period after a change in output, during which time the cell output is fixed. This refractory period describes the behavior of hysteretic cells such as shape memory alloy (SMA) actuators or biological cell migration. Conditions for stability are obtained using a stochastic Lyapunov function. Simulation of SMA actuators demonstrates the application of the new control law to practical hysteresis loops.

Compensation of Hystetresis Nonlinearties in Smart Actuators

2008 ◽  
Author(s):  
Mohammad Al Janaideh ◽  
Subash Rkaheja ◽  
Chun-Yi Su
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Hysteresis Loops ◽  
Experimental Results ◽  
Piezoceramic Actuator ◽  
Sma Actuators ◽  
Smart Actuators ◽  
Play Operator

Smart actuators such shape memory alloy (SMA) actuators and piezoceramic actuators exhibit different hysteresis loops. In this paper, a generalized Prandtl-Ishlinskii model is utilized for modeling and compensation of hysteresis effects in smart actuators. In the formulated model, a generalized play operator together with a density is integrated to form the generalized Prandtl-Ishlinskii model. The capability of the formulated model to characterize hysteresis in smart actuators is demonstrated by comparing its outputs with experimental results obtained from different smart actuators. Furthermore, an analytical inverse of the generalized Prandtl-Ishlinskii model is derived for compensations in different smart actuators. Such compensation is experimentally illustrated by piezoceramic actuator.

scholarly journals Disturbance compensation-based output feedback adaptive control for shape memory alloy actuator system

2021 ◽  
Vol 18 (1) ◽  
pp. 172988142199399
Author(s):  
Xiaoguang Li ◽  
Bi Zhang ◽  
Daohui Zhang ◽  
Xingang Zhao ◽  
Jianda Han
Keyword(s):  
Adaptive Control ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Control Method ◽  
Control Law ◽  
Reference Trajectory ◽  
Disturbance Compensation ◽  
Comparison Results ◽  
Control Scheme ◽  
Actuator System

Shape memory alloy (SMA) has been utilized as the material of smart actuators due to the miniaturization and lightweight. However, the nonlinearity and hysteresis of SMA material seriously affect the precise control. In this article, a novel disturbance compensation-based adaptive control scheme is developed to improve the control performance of SMA actuator system. Firstly, the nominal model is constructed based on the physical process. Next, an estimator is developed to online update not only the unmeasured system states but also the total disturbance. Then, the novel adaptive controller, which is composed of the nominal control law and the compensation control law, is designed. Finally, the proposed scheme is evaluated in the SMA experimental setup. The comparison results have demonstrated that the proposed control method can track reference trajectory accurately, reject load variations and stochastic disturbances timely, and exhibit satisfactory robust stability. The proposed control scheme is system independent and has some potential in other types of SMA-actuated systems.

Structural fatigue and fracture of shape memory alloy actuators: Current status and perspectives

2021 ◽  
pp. 1045389X2110572
Author(s):  
Md Mehedi Hasan ◽  
Theocharis Baxevanis
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Current Status ◽  
Structural Fatigue ◽  
Sma Actuators ◽  
Empirical Relations ◽  
Fatigue And Fracture ◽  
And Performance ◽  
Commercial Applications ◽  
Crack Growth Rates

Shape Memory Alloy (SMA)-actuators are efficient, simple, and robust alternatives to conventional actuators when a small volume and/or large force and stroke are required. The analysis of their failure response is critical for their design in order to achieve optimum functionality and performance. Here, (i) the existing knowledge base on the fatigue and overload fracture response of SMAs under actuation loading is reviewed regarding the failure micromechanisms, empirical relations for actuation fatigue life prediction, experimental measurements of fracture toughness and fatigue crack growth rates, and numerical investigations of toughness properties and (ii) future developments required to expand the acquired knowledge, enhance the current understanding, and ultimately enable commercial applications of SMA-actuators are discussed.

Design of a 2 DOF Shape Memory Alloy Actuator Using SMA Springs

2021 ◽  
Author(s):  
Hussein F. M. Ali ◽  
Youngshik Kim
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Open Loop ◽  
Degree Of Freedom ◽  
Biologically Inspired ◽  
Loop Control ◽  
Actuator System ◽  
Sma Actuator ◽  
Sma Spring ◽  
Two Degree Of Freedom

Abstract In this paper, we developed two degree of freedom shape memory alloy (SMA) actuator using SMA springs. This module can be applied easily to various applications: device holder, artificial finger, grippes, fish robot, and many other biologically inspired applications, where small size and small wight of the actuator are very critical. This actuator is composed of two sets of SMA springs: one set is for the rotation around the X axis (roll angle) and the other set is for the rotation around the Y axis (pitch angle). Each set contains two elements: one SMA spring and one antagonistic SMA spring. We used an inertia sensor (IMU) and two potentiometers for angles feedback. The SMA actuator system is modeled mathematically and then tested experimentally in open-loop and closed-loop control. We designed and experimentally tuned a proportional integrator derivative (PID) controller to follow the set points and to track the desired trajectories. The main goal of the presented controller is to control roll and pitch angles simultaneously in order to satisfy set points and trajectories within the work space. The experimental results show that the two degree of freedom SMA actuator system follows the desired setpoints with acceptable rise time and overshoot.

Optimal H∞ Control of Structural Vibrations Using Shape Memory Alloy Actuators

1999 ◽  
Author(s):  
Jian Sun ◽  
Ali R. Shahin
Keyword(s):  
Mathematical Model ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Model Uncertainty ◽  
High Frequency ◽  
Structural Vibrations ◽  
Design Procedures ◽  
Sma Actuators ◽  
Temperature Dynamics ◽  
The Mathematical Model

Abstract This paper investigates robust control problem of structural vibrations using shape memory alloy (SMA) wires as actuators. The mathematical model for these SMA actuators is derived with emphasis in model uncertainty. The linearization of the relation between stress and temperature dynamics of SMA actuators is analyzed for active control. To handle the uncertainties caused by the linearization and the neglected high frequency dynamics, optimal H∞ control was employed to design a controller. An example is used to demonstrate the design procedures and the control system is tested in a nonlinear environment.

Shape Memory Alloys in Automotive Applications

2014 ◽  
Vol 663 ◽  
pp. 248-253 ◽  
Author(s):  
Jaronie Mohd Jani ◽  
Martin Leary ◽  
Aleksandar Subic
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
External Force ◽  
Active Element ◽  
Mechanical Design ◽  
Competitive Market ◽  
Automotive Applications ◽  
Market Prices ◽  
Sma Actuators

Shape memory alloy (SMA) actuators have drawn much attention and interest due to their unique and superior properties, and are expected to be equipped in many modern vehicles at competitive market prices. The key advantage is that SMA actuators do not require bulky and complicated mechanical design to function, where the active element (e.g. SMA wire or spring) can be deformed by applying minimal external force and will retain to their previous form when subjected to certain stimuli such as thermomechanical or magnetic changes. This paper describes the SMA attributes that make them ideally suited as actuators in automotive applications and to address their limitations, feasibilities and prospects.

Modeling and Tracking Control System of Shape Memory Alloy Actuator

2007 ◽  
Author(s):  
B. Y. Ren ◽  
B. Q. Chen
Keyword(s):  
Control System ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Tracking Control ◽  
Fuzzy Controller ◽  
Smart Structures ◽  
Constitutive Law ◽  
Hysteresis Model ◽  
Sma Actuators ◽  
Sma Actuator

The different Shape Memory Alloy (SMA) actuators have been widely used in the fields of smart structures. However, the accurate prediction of thermomechanical behavior of SMA actuators is very difficult due to the nonlinearity of inherence hysteresis of SMA. Therefore, the tracking control accuracy of SMA actuator is very important for the practical application of the SMA actuator. A dynamic hysteresis model of bias-type SMA actuator based on constitutive law developed by Brinson et al. and hysteresis model developed by Ikuta et al. is presented. The control systems composed of the Proportional Integral Derivative (PID) controller as well as a fuzzy controller or a fuzzy-PID composite controller for compensating the hysteresis is proposed. The effort of tracking control system is analyzed according to the simulation on the displacement of SMA actuator with the three kinds of controllers. The result can provide a reference for the application of SMA actuator in the fields of smart structures.

Wet Shape Memory Alloy Actuated Robotic Heart

2009 ◽  
Author(s):  
Joel Ertel ◽  
Stephen Mascaro
Keyword(s):  
Shape Memory Alloy ◽  
Theoretical Analysis ◽  
Shape Memory ◽  
Preliminary Analysis ◽  
Design Concept ◽  
Design Parameters ◽  
Sma Actuators ◽  
Fluid Analysis ◽  
Cold Fluid ◽  
Simulation And Experiment

This paper presents a conceptual design and preliminary analysis for a biomimetic robotic heart. The purpose of the robotic heart is to distribute hot and cold fluid to robotic muscles composed of wet shape-memory alloy (SMA) actuators. The robotic heart is itself powered by wet SMA actuators. A heart design concept is proposed and the feasibility of self-sustaining motion is investigated through simulation and experiment. The chosen design employs symmetric pumping chambers for hot and cold fluid. Analysis of this design concept shows that there exists a range of design parameters that will allow the heart to output more fluid than it uses. Additionally, it is shown that the heartbeat rate decreases as the system increases in size, and that the number of actuators and their length limit the power output of the pump. Experimental results from a prototype heart agree with the predicted trends from theoretical analysis and simulation.

QUASIPASSIVITY-BASED ROBUST NONLINEAR FLAP POSITIONING CONTROL USING SHAPE MEMORY ALLOY MICRO-ACTUATORS

2005 ◽  
Vol 29 (2) ◽  
pp. 143-161
Author(s):  
Nicolas Léchevin ◽  
Camille Alain Rabbath ◽  
Frank Wong ◽  
O. Boissonneault
Keyword(s):  
Shape Memory Alloy ◽  
Nonlinear Control ◽  
Numerical Simulations ◽  
Shape Memory ◽  
Position Control ◽  
Tracking Error ◽  
Constitutive Law ◽  
Control Law ◽  
Ultimate Boundedness ◽  
Feedback Connection

This paper proposes a quasipassivity-based robust nonlinear control law ensuring position control of a rotary flap by means of an antagonist-type shape memory alloy microactuator. The control system employs variable-structure control to obtain robust performance, phase-lead compensation to quasipassivate the shape memory alloy dynamics and quasipassivity-based analysis to warrant robust ultimate boundedness of system trajectories. The feedback connection of the two paths leads to ultimate boundedness of tracking error trajectories of the plant despite uncertainties in the dynamic loads affecting the leading edge flap and in the friction found in the actuator. Since accurate numerical simulations and development of new concepts of microactuators based on shape memory alloys require a tractable, constitutive law accurately describing the relationship between force, displacement and temperature in the material, the paper also presents a hybrid micro-macro-mechanical shape memory alloy constitutive model. This model is based on a combination of structural modeling on a microscopic scale and transformation kinetics modeling on a macroscopic scale. The proposed control law and hybrid micro-macro-mechanical model are placed in closed-loop by means of numerical simulations that demonstrate the validity of the nonlinear control scheme.

scholarly journals A 3D Printed Implantable Device for Voiding the Bladder Using Shape Memory Alloy (SMA) Actuators

2017 ◽  
Vol 4 (11) ◽  
pp. 1700143 ◽  
Author(s):  
Faezeh Arab Hassani ◽  
Wendy Yen Xian Peh ◽  
Gil Gerald Lasam Gammad ◽  
Roshini Priya Mogan ◽  
Tze Kiat Ng ◽  
...  
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Implantable Device ◽  
Sma Actuators ◽  
3D Printed
Sign in / Sign up

Export Citation Format

Share Document