A Novel Method on Singularity Analysis in Parallel Manipulators

2006 ◽  
Author(s):  
Hodjat Pendar ◽  
Maryam Mahnama ◽  
Hassan Zohoor
Keyword(s):  
Closed Loop ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
Kinematic Chains ◽  
Working Space ◽  
Novel Approach ◽  
Main Technique ◽  
Novel Method ◽  
Constraint Plane

A parallel manipulator is a closed loop mechanism in which a moving platform is connected to the base by at least two serial kinematic chains. The main problem engaged in these mechanisms, is their restricted working space as a result of singularities. In order to tackle these problems, many methods have been introduced by scholars. However, most of the mentioned methods are too much time consuming and need a great amount of computations. They also in most cases do not provide a good insight to the existence of singularity for the designer. In this paper a novel approach is introduced and utilized to identify singularities in parallel manipulators. By applying the new method, one could get a better understanding of geometrical interpretation of singularities in parallel mechanisms. Here we have introduced the Constraint Plane Method (CPM) and some of its applications in parallel mechanisms. The main technique used here, is based on Ceva Theorem.

Kinematic Analysis and Design of Kinematically Redundant Parallel Mechanisms

2004 ◽  
Vol 126 (1) ◽  
pp. 109-118 ◽  
Author(s):  
Jing Wang ◽  
Cle´ment M. Gosselin
Keyword(s):  
Kinematic Analysis ◽  
Main Idea ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Degree Of Freedom ◽  
Redundant Manipulators ◽  
Parallel Mechanisms ◽  
Jacobian Matrices ◽  
Kinematic Chains ◽  
Analysis And Design

This paper addresses the singularity analysis and the design of three new types of kinematically redundant parallel mechanisms, i.e., the four-degree-of-freedom planar and spherical parallel mechanisms and the seven-degree-of-freedom spatial Stewart platform. The main idea in the design of these parallel manipulators is the addition of one redundant degree of freedom in one of the kinematic chains of the nonredundant manipulator. Such manipulators can be used to avoid the singularities inside the workspace of nonredundant manipulators. After describing the geometry of the manipulators, the velocity equations are derived and the expressions for the Jacobian matrices are obtained. Then, the singularity conditions are discussed. Finally, the expressions of the singularity loci of the kinematically redundant mechanisms are obtained and the singularity loci of the nonredundant and redundant manipulators are compared. It is shown here that the conditions for the singularity of the redundant manipulators are reduced drastically relative to the nonredundant ones. As a result, the proposed kinematically redundant parallel manipulators may be of great interest in several applications.

Synthesis of 2T1R Decoupled Parallel Manipulators

2011 ◽  
Vol 308-310 ◽  
pp. 2025-2030 ◽  
Author(s):  
Wen Juan Lu ◽  
Li Jie Zhang ◽  
Da Xing Zeng ◽  
Ruo Song Wang
Keyword(s):  
Screw Theory ◽  
Control Design ◽  
Parallel Manipulators ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Precision Control ◽  
Kinematic Chains ◽  
Step Procedure ◽  
Nonlinear Relation ◽  
Three Degree Of Freedom

For the general parallel mechanisms(PMS), since the coupling between kinematic chains, the nonlinear relation between the input and output is presented, which have led to difficulty in the trajectory planning and precision control. Design of motion decoupled parallel mechanisms(DPMS) has become a good new topic in this area and has captured researcher's attention. In this work, the approach to a synthesis of three degree-of-freedom(3-DOF) DPMS is considered based on screw theory and motion synthesis ideas. Criterions for type synthesis of the branches for DPMS is established according to the twist screw system of the limbs, which assures the decoupling in each limb. Then a six-step procedure is presented for the type synthesis of 2T1R decoupled mechanisms.

scholarly journals Grasp planning for a reconfigurable parallel robot with an underactuated arm structure

2010 ◽  
Vol 1 (1) ◽  
pp. 33-42 ◽  
Author(s):  
M. Riedel ◽  
M. Nefzi ◽  
B. Corves
Keyword(s):  
Closed Loop ◽  
International Workshop ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Grasp Planning ◽  
Robotic Arms ◽  
Cartesian Space ◽  
Novel Approach ◽  
Manipulation Task ◽  
Actuated Joints

Abstract. In this paper, a novel approach of grasp planning is applied to find out the appropriate grasp points for a reconfigurable parallel robot called PARAGRIP (Parallel Gripping). This new handling system is able to manipulate objects in the six-dimensional Cartesian space by several robotic arms using only six actuated joints. After grasping, the contact elements at the end of the underactuated arm mechanisms are connected to the object which forms a closed loop mechanism similar to the architecture of parallel manipulators. As the mounting and grasp points of the arms can easily be changed, the manipulator can be reconfigured to match the user's preferences and needs. This paper raises the question, how and where these grasp points are to be placed on the object to perform well for a certain manipulation task. This paper was presented at the IFToMM/ASME International Workshop on Underactuated Grasping (UG2010), 19 August 2010, Montréal, Canada.

scholarly journals Kinematic analysis of the X4 translational–rotational parallel robot

2018 ◽  
Vol 15 (5) ◽  
pp. 172988141880384 ◽  
Author(s):  
Stefan Staicu ◽  
Zhufeng Shao ◽  
Zhaokun Zhang ◽  
Xiaoqiang Tang ◽  
Liping Wang
Keyword(s):  
High Speed ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Degree Of Freedom ◽  
Parallel Mechanisms ◽  
Kinematic Chains ◽  
Revolute Joints ◽  
Commercial Applications ◽  
Recursive Matrix ◽  
Singularity Locus

High-speed pick-and-place parallel manipulators have attracted considerable academic and industrial attention because of their numerous commercial applications. The X4 parallel robot was recently presented at Tsinghua University. This robot is a four-degree-of-freedom spatial parallel manipulator that consists of high-speed closed kinematic chains. Each of its limbs comprises an active pendulum and a passive parallelogram, which are connected to the end effector with other revolute joints. Kinematic issues of the X4 parallel robot, such as degree of freedom analysis, inverse kinematics, and singularity locus, are investigated in this study. Recursive matrix relations of kinematics are established, and expressions that determine the position, velocity, and acceleration of each robot element are developed. Finally, kinematic simulations of actuators and passive joints are conducted. The analysis and modeling methods illustrated in this study can be further applied to the kinematics research of other parallel mechanisms.

Design and Singularity Analysis of a 3-Translational-DOF In-Parallel Manipulator*

2002 ◽  
Vol 124 (3) ◽  
pp. 419-426 ◽  
Author(s):  
L. Romdhane ◽  
Z. Affi ◽  
M. Fayet
Keyword(s):  
Kinematic Analysis ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Orientation Error ◽  
Kinematic Chains ◽  
Prismatic Joints ◽  
Forward Kinematic ◽  
3D Solid ◽  
Novel Design

In this work, we shall present a novel design of a 3-translational-DOF in-parallel manipulator having 3 linear actuators. Three variable length legs constitute the actuators of this manipulator, whereas two other kinematic chains with passive joints are used to eliminate the three rotations of the platform with respect to the base. This design presents several advantages compared to other designs of similar 3-translational-dof parallel manipulators. First, the proposed design uses only revolute or spherical joints as passive joints and hence, it avoids problems that are inherent to the nature of prismatic joints when loaded in arbitrary way. Second, the actuators are chosen to be linear and to be located in the three legs since this design presents higher rigidity than other. In the second part of this paper, we addressed the problem of kinematic analysis of the proposed in-parallel manipulator. A mixed geometric and vector formulation is used to show that two solutions exist for the forward kinematic analysis. The problem of singularities is also investigated using the same method. In this work, we investigated the singularities of the active legs and the two types of singularity were identified: architectural singularities and configurational singularities. The singularity of the passive chains, used to restrict the motion of the platform to only three translations, is also investigated. In the last part of this paper, we built a 3D solid model of the platform and the amplitude of rotation due to the deformation of the different links under some realistic load was determined. This allowed us to estimate the “orientation error” of the platform due to external moments. Moreover, this analysis allowed us to compare the proposed design (over constrained) with a modified one (not over constrained). This comparison confirmed the conclusion that the over constraint design has a better rigidity.

An Efficient Rate Allocation Algorithm in Redundant Kinematic Chains

1989 ◽  
Vol 111 (4) ◽  
pp. 545-554 ◽  
Author(s):  
M. Z. Huang ◽  
K. J. Waldron
Keyword(s):  
Solution Method ◽  
Parallel Mechanisms ◽  
Kinematic Redundancy ◽  
Distribution Problem ◽  
Serial Manipulators ◽  
Kinematic Chains ◽  
Parallel Chain ◽  
Serial Chain ◽  
Force Systems ◽  
Novel Method

This paper addresses a basic problem which arises in the coordination of serial chain manipulators, namely, that of decomposing a given end effector velocity state into a set of joint rates. Such a problem is indeterminate for manipulators with kinematic redundancy. A novel method of solving the rate distribution problem for the class of fully revolute-jointed, serial manipulators is developed. The technique is an extension of the axial field solution scheme developed initially for solving the force allocation problem in a statically indeterminate parallel chain system. The basis of the solution method lies in the dualities of velocity and force systems between series and parallel mechanisms. The method offers an efficient means of rate coordination and is especially useful in the control of manipulators with high degrees of redundancy. Two examples have been given for illustration. It is shown that the minimum norm solution, obtainable commonly from pseudoinverse, can also be achieved using this new efficient algorithm.

Synthesis of Two-Degree-of-Freedom Rotational Decoupled Manipulators of a 2R-Type Branch

2013 ◽  
Vol 284-287 ◽  
pp. 1929-1935
Author(s):  
Da Xing Zeng ◽  
Wen Juan Lu ◽  
Li Jie Zhang ◽  
Yi Tong Zhang
Keyword(s):  
Trajectory Planning ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Precision Control ◽  
Kinematic Chains ◽  
Parallel Kinematic ◽  
Branch Type ◽  
Two Degree Of Freedom

Strong coupling is one of the prominent features of the general parallel mechanisms(Par. Mec.), which has led to difficulty in the trajectory planning and precision control. To solve this problem, the designing of motion decoupled parallel mechanisms(Dec. Par. Mec.) has become a hot topic. This paper, based on the work achieved in our pre-papers, is to make an improvement on the criterion for a branch type synthesis of the rotational decoupled parallel mechanisms(Rot. Dec. Par. Mec.), which ensures the decoupling of the rotations in each limb. This paper focuses on a type synthesis of the decoupled parallel mechanisms with two degree of freedoms (DOFs). Decoupled parallel manipulators with two parallel kinematic chains, one of which is of type 2R(R represents rotation), are taken into consideration in this paper. A large number of novel decoupled architectures are already obtained, some of which have got an application for a China Patent. What has been done in this paper is carried out by means of the screw theory, which has effectively avoided complex equations by synthesis.

Parallel Computational Algorithms for the Kinematics and Dynamics of Planar and Spatial Parallel Manipulators

1996 ◽  
Vol 118 (1) ◽  
pp. 22-28 ◽  
Author(s):  
C. M. Gosselin
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Inverse Dynamics ◽  
Parallel Manipulators ◽  
Degree Of Freedom ◽  
Kinematic Chains ◽  
Novel Approach ◽  
Judicious Choice ◽  
Six Degree Of Freedom ◽  
Three Degree Of Freedom

This paper introduces a novel approach for the computation of the inverse dynamics of parallel manipulators. It is shown that, for this type of manipulator, the inverse kinematics and the inverse dynamics procedures can be easily parallelized. The result is a closed-form efficient algorithm using n processors, where n is the number of kinematic chains connecting the base to the end-effector. The dynamics computations are based on the Newton-Euler formalism. The parallel algorithm arises from a judicious choice of the coordinate frames attached to each of the legs, which allows the exploitation of the parallel nature of the mechanism itself. Examples of the application of the algorithm to a planar three-degree-of-freedom parallel manipulator and to a spatial six-degree-of-freedom parallel manipulator are presented.

Sign in / Sign up

Export Citation Format

Share Document