Experimental and Numerical Analysis of Fluid Flow Through a Micromixer With the Presence of Electric Field

2020 ◽  
Author(s):  
Md Fazlay Rubby ◽  
Mohammad Salman Parvez ◽  
Prosanto Biswas ◽  
Hasina Huq ◽  
Nazmul Islam
Keyword(s):  
Numerical Simulation ◽  
Electric Field ◽  
Electric Potential ◽  
Dna Analysis ◽  
Outlet Channel ◽  
Micro Piv ◽  
Tracer Particles ◽  
Channel Outlet ◽  
Input Parameters ◽  
Potential Applications

Abstract Fluid flows in a microchannel with highly ordered laminar fashion. For this reason, two different fluid streams cannot mix easily, or it takes a very long time. The problem becomes intense for large molecules such as peptides, proteins, and nucleic acids during rapid mixing for biochemical applications in a microfluidic device. Many researchers tried to solve this problem by applying an electric potential. In this work, a numerical simulation was performed on a 2D micromixer. Four symmetric electrodes were placed on the wall of a straight microchannel of width 19 μm. The electroosmotic slip velocity boundary condition was used to create the turbulence on the laminar fluid stream. It was found that this model creates a well-mixed flow at the channel outlet. Then the input parameters were changed to compare the mixing performance in terms of concentration distribution at the channel outlet. Channel width, inter-electrodes gap, the magnitude of electric potential, frequency of the electric potential and asymmetricity of the electrodes were changed and results were compared. An experimental micromixer like the numerical model was fabricated by dc magnetron sputtering machine. Four gold electrodes (thickness, 120 nm) were sputtered on top of a silicon substrate. The value of the input parameters was chosen based on the results obtained from the numerical simulation. To test the mixing functionality of our device the movement of tracer particles was tracked down on the zone surrounded by four electrodes. The micro-PIV (Particulate Image Velocimetry) system was used to analyze the movement of the tracer particles and visualize the flow field in the mixing zone. The magnitude of the AC electric potential and frequency was changed to find out the optimum input parameters for the micromixer. These results could play an important role to design and improve a micromixer design using an AC electric field. A micromixer has many potential applications in biology (DNA analysis, enzyme Screening), chemistry (synthesis, polymerization) and detection (drug discovery, diagnosis).

scholarly journals Liquid Mixing Based on Electrokinetic Vortices Generated in a T-Type Microchannel

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 130
Author(s):  
Chengfa Wang
Keyword(s):  
Zeta Potential ◽  
Electric Field ◽  
Microfluidic Devices ◽  
Outlet Channel ◽  
Mixing Performance ◽  
Zeta Potentials ◽  
Potential Applications ◽  
Dc Electric Field ◽  
Good Potential ◽  
Downstream Section

This article proposes a micromixer based on the vortices generated in a T-type microchannel with nonuniform but same polarity zeta potentials under a direct current (DC) electric field. The downstream section (modified section) of the outlet channel was designed with a smaller zeta potential than others (unmodified section). When a DC electric field is applied in the microchannel, the electrokinetic vortices will form under certain conditions and hence mix the solution. The numerical results show that the mixing performance is better when the channel width and the zeta potential ratio of the modified section to the unmodified section are smaller. Besides, the electrokinetic vortices formed in the microchannel are stronger under a larger length ratio of the modified section to the unmodified section of the outlet channel, and correspondingly, the mixing performance is better. The micromixer presented in the paper is quite simple in structure and has good potential applications in microfluidic devices.

Numerical Simulation of Leakage Current on Conductive Insulator Surface

2019 ◽  
Vol 8 (4) ◽  
pp. 9487-9492
Keyword(s):  
Numerical Simulation ◽  
Electric Field ◽  
Leakage Current ◽  
Method Of Lines ◽  
Electron Attachment ◽  
Negative Ions ◽  
Conduction Current ◽  
Insulator Surface ◽  
Finite Difference Approximations ◽  
Positive Ions

The outdoor insulator is commonly exposed to environmental pollution. The presence of water like raindrops and dew on the contaminant surface can lead to surface degradation due to leakage current. However, the physical process of this phenomenon is not well understood. Hence, in this study we develop a mathematical model of leakage current on the outdoor insulator surface using the Nernst Planck theory which accounts for the charge transport between the electrodes (negative and positive electrode) and charge generation mechanism. Meanwhile the electric field obeys Poisson’s equation. Method of Lines technique is used to solve the model numerically in which it converts the PDE into a system of ODEs by Finite Difference Approximations. The numerical simulation compares reasonably well with the experimental conduction current. The findings from the simulation shows that the conduction current is affected by the electric field distribution and charge concentration. The rise of the conduction current is due to the distribution of positive ion while the dominancy of electron attachment with neutral molecule and recombination with positive ions has caused a significant reduction of electron and increment of negative ions.

scholarly journals Dynamic Line Rating—An Effective Method to Increase the Safety of Power Lines

2021 ◽  
Vol 11 (2) ◽  
pp. 492
Author(s):  
Levente Rácz ◽  
Bálint Németh
Keyword(s):  
Expert System ◽  
Electric Field ◽  
High Voltage ◽  
Low Frequency ◽  
Power Line ◽  
Power Lines ◽  
Design Parameters ◽  
Monitoring Methods ◽  
Limit Value ◽  
Potential Applications

Exceeding the electric field’s limit value is not allowed in the vicinity of high-voltage power lines because of both legal and safety aspects. The design parameters of the line must be chosen so that such cases do not occur. However, analysis of several operating power lines in Europe found that the electric field strength in many cases exceeds the legally prescribed limit for the general public. To illustrate this issue and its importance, field measurement and finite element simulation results of the low-frequency electric field are presented for an active 400 kV power line. The purpose of this paper is to offer a new, economical expert system based on dynamic line rating (DLR) that utilizes the potential of real-time power line monitoring methods. The article describes the expert system’s strengths and benefits from both technical and financial points of view, highlighting DLR’s potential for application. With our proposed expert system, it is possible to increase a power line’s safety and security by ensuring that the electric field does not exceed its limit value. In this way, the authors demonstrate that DLR has other potential applications in addition to its capacity-increasing effect in the high voltage grid.

Some simple theorems concerning crystal lattice sums of electric potential, electric field, and electric field gradient in crystals

1967 ◽  
Vol 20 (12) ◽  
pp. 2551 ◽  
Author(s):  
CK Coogan
Keyword(s):  
Electric Field ◽  
Field Gradient ◽  
Electric Potential ◽  
Higher Symmetry ◽  
Lattice Sums ◽  
Symmetry Properties ◽  
Lattice Sum ◽  
Direct Lattice ◽  
Electric Potential Field ◽  
Conver Gence

The conditions under which direct lattice sums of electric potential, field, and field gradient converge are discussed. The analogous conditions under which differences in these lattice sums, for two points in the crystal, converge are also outlined. These conditions are applied to direct lattice sum calculations in crystals in which the ideal lattice is distorted close to a defect of some kind. The conver- gence conditions are then applied to the case of determining the direct lattice sums in crystals in which higher symmetry properties can be invoked, which leads to a knowledge by inspection of the lattice sum at one point in the unit cell.

scholarly journals Electric potential differences across auroral generator interfaces

2013 ◽  
Vol 31 (2) ◽  
pp. 251-261 ◽  
Author(s):  
J. De Keyser ◽  
M. Echim
Keyword(s):  
Electric Field ◽  
High Altitude ◽  
Electric Fields ◽  
Electric Potential ◽  
Equilibrium Configuration ◽  
Potential Difference ◽  
Field Profile ◽  
Electric Potential Difference ◽  
Electric Field Profile

Abstract. Strong localized high-altitude auroral electric fields, such as those observed by Cluster, are often associated with magnetospheric interfaces. The type of high-altitude electric field profile (monopolar, bipolar, or more complicated) depends on the properties of the plasmas on either side of the interface, as well as on the total electric potential difference across the structure. The present paper explores the role of this cross-field electric potential difference in the situation where the interface is a tangential discontinuity. A self-consistent Vlasov description is used to determine the equilibrium configuration for different values of the transverse potential difference. A major observation is that there exist limits to the potential difference, beyond which no equilibrium configuration of the interface can be sustained. It is further demonstrated how the plasma densities and temperatures affect the type of electric field profile in the transition, with monopolar electric fields appearing primarily when the temperature contrast is large. These findings strongly support the observed association of monopolar fields with the plasma sheet boundary. The role of shear flow tangent to the interface is also examined.

Sign in / Sign up

Export Citation Format

Share Document