Open Counter-Rotation Fan Blades Optimization Based on 3D Inverse Problem Navier-Stokes Solution Method With the Aim of Tonal Noise Reduction

2008 ◽  
Author(s):  
Victor I. Mileshin ◽  
Michael A. Nyukhtikov ◽  
Igor K. Orekhov ◽  
Sergey V. Pankov ◽  
Sergey K. Shchipin
Keyword(s):  
Inverse Problem ◽  
Stokes Equations ◽  
Aerodynamic Characteristics ◽  
Tip Vortex ◽  
Navier Stokes ◽  
Far Field ◽  
Tonal Noise ◽  
Noise Sources ◽  
Navier Stokes Equations ◽  
Counter Rotation

When developing counter-rotating fans for advanced new-generation aeroengines with unducted blades it is very important to provide high acoustic and aerodynamic characteristics [1]. This paper presents some results of gasdynamic and aeroacoustic optimization of unducted CRF blade profile by using 3D viscous inverse problem. Flow in unducted CRF on the basis of unsteady 3D Navier-Stokes equations is modeled at the 1st stage of designing in order to find the key tonal noise sources. Based on these results, it is found that one of the key tonal noise sources is Rotor 1 - Rotor 2 tip vortices interaction and potential rotor interaction. Then, using 3D solver of the viscous inverse problem, aerodynamic loads are redistributed along R1 and R2 blade height aiming at a decrease in tip vortex intensity and potential rotor interaction with a probable increase in the CRF thrust. To verify the aerodynamic characteristics of the modified CRF, steady flow calculations are carried out with the help of 3D Navier-Stokes equations and “mixing plane” interfaces. To verify the acoustic characteristics of the modified CRF, tonal noise modeling is carried out for original and modified CRFs using aeroacoustic CIAM’s 3DAS solver for solution of unsteady inviscid equations for disturbances. Ffowcs–Williams, Howkings approach is used for acoustic calculations in the far field. The near acoustic field and directivity diagrams in the far field are found. Using 3D inverse problem, the fan tonal noise is decreased by 4 dB for take-0ff and landing with no thrust and efficiency losses.

Advanced Numerical Methods for the Prediction of Tonal Noise in Turbomachinery—Part I: Implicit Runge–Kutta Schemes

2013 ◽  
Vol 136 (2) ◽  
Author(s):  
Graham Ashcroft ◽  
Christian Frey ◽  
Kathrin Heitkamp ◽  
Christian Weckmüller
Keyword(s):  
Stokes Equations ◽  
Temporal Integration ◽  
Aerodynamic Noise ◽  
Navier Stokes ◽  
Noise Generation ◽  
Academic Problems ◽  
Tonal Noise ◽  
Navier Stokes Equations ◽  
Runge Kutta ◽  
The Stability

This is the first part of a series of two papers on unsteady computational fluid dynamics (CFD) methods for the numerical simulation of aerodynamic noise generation and propagation. In this part, the stability, accuracy, and efficiency of implicit Runge–Kutta schemes for the temporal integration of the compressible Navier–Stokes equations are investigated in the context of a CFD code for turbomachinery applications. Using two model academic problems, the properties of two explicit first stage, singly diagonally implicit Runge–Kutta (ESDIRK) schemes of second- and third-order accuracy are quantified and compared with more conventional second-order multistep methods. Finally, to assess the ESDIRK schemes in the context of an industrially relevant configuration, the schemes are applied to predict the tonal noise generation and transmission in a modern high bypass ratio fan stage and comparisons with the corresponding experimental data are provided.

On the identification of a single body immersed in a Navier-Stokes fluid

2007 ◽  
Vol 18 (1) ◽  
pp. 57-80 ◽  
Author(s):  
A. DOUBOVA ◽  
E. FERNÁNDEZ-CARA ◽  
J. H. ORTEGA
Keyword(s):  
Inverse Problem ◽  
Rigid Body ◽  
Stokes Equations ◽  
Outer Boundary ◽  
Unique Continuation ◽  
Uniqueness Result ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Friction Forces ◽  
Regularity Results

In this work we consider the inverse problem of the identification of a single rigid body immersed in a fluid governed by the stationary Navier-Stokes equations. It is assumed that friction forces are known on a part of the outer boundary. We first prove a uniqueness result. Then, we establish a formula for the observed friction forces, at first order, in terms of the deformation of the rigid body. In some particular situations, this provides a strategy that could be used to compute approximations to the solution of the inverse problem. In the proofs we use unique continuation and regularity results for the Navier-Stokes equations and domain variation techniques.

Studies on Aerodynamic Characteristics of Dump Diffusers for Modern Aircraft Engines

2012 ◽  
Vol 232 ◽  
pp. 246-251 ◽  
Author(s):  
P. Sathyan ◽  
S. Srikanth ◽  
I. Dheepan ◽  
M. Arun ◽  
C. Aswin ◽  
...  
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Fluid Dynamic ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Finite Volume Scheme ◽  
Aircraft Engines ◽  
Navier Stokes Equations ◽  
Dynamic Constraints ◽  
Fully Implicit

The geometrical optimization of dump diffusers are extremely demanding as the flow fields and stress fields are very complex and must be well understood to achieve the required design efficiencies. In this paper parametric analytical studies have been carried out for examining the aerodynamics characteristics of different dump diffusers for modern aircraft engines. Numerical studies have been carried out using SST K- ω turbulence model. This code solves SST k- ω turbulence equations using the coupled second order implicit unsteady formulation. In the numerical study, a fully implicit finite volume scheme of the compressible, Reynolds-Averaged, Navier-Stokes equations is employed. We concluded that in addition to the dump gap ratio, the aerodynamic shape of the flame tube case and the other geometric variables are also need to be optimized judiciously after considering the fluid dynamic constraints for controlling the pressure recovery and the losses.

scholarly journals Sound generation in a mixing layer

1997 ◽  
Vol 330 ◽  
pp. 375-409 ◽  
Author(s):  
TIM COLONIUS ◽  
SANJIVA K. LELE ◽  
PARVIZ MOIN
Keyword(s):  
Acoustic Field ◽  
Stokes Equations ◽  
Near Field ◽  
Mixing Layer ◽  
Navier Stokes ◽  
Far Field ◽  
Source Terms ◽  
Acoustic Analogy ◽  
Navier Stokes Equations ◽  
Acoustic Sources

The sound generated by vortex pairing in a two-dimensional compressible mixing layer is investigated. Direct numerical simulations (DNS) of the Navier–Stokes equations are used to compute both the near-field region and a portion of the acoustic field. The acoustic analogy due to Lilley (1974) is also solved with acoustic sources determined from the near-field data of the DNS. It is shown that several commonly made simplifications to the acoustic sources can lead to erroneous predictions for the acoustic field. Predictions based on the quadrupole form of the source terms derived by Goldstein (1976a, 1984) are in excellent agreement with the acoustic field from the DNS. However, despite the low Mach number of the flow, the acoustic far field generated by the vortex pairings cannot be described by considering compact quadrupole sources. The acoustic sources have the form of modulated wave packets and the acoustic far field is described by a superdirective model (Crighton & Huerre 1990). The presence of flow–acoustic interactions in the computed source terms causes the acoustic field predicted by the acoustic analogy to be very sensitive to small changes in the description of the source.

scholarly journals Effect of Leading-Edge Bulges on Aerodynamic Characteristics of Bionic Wingsail

2021 ◽  
Author(s):  
Chen Li ◽  
Peiting Sun ◽  
Hongming Wang
Keyword(s):  
Stokes Equations ◽  
Lift Coefficient ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Suction Surface ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Extension Direction ◽  
Lift And Drag

The leading-edge bulges along the extension direction are designed on the marine wingsail. The height and the spanwise wavelength of the protuberances are 0.1c and 0.25c, respectively. At Reynolds number Re=5×105, the Reynolds Averaged Navier-Stokes equations are applied to the simulation of the wingsail with the bulges thanks to ANSYS Fluent finite-volume solver based on the SST K-ω models. The grid independence analysis is carried out with the lift and drag coefficients of the wingsail at AOA = 8° and AOA=20°. The results show that while the efficiency of the wingsail is reduced by devising the leading-edge bulges before stall, the bulges help to improve the lift coefficient of the wingsail when stalling. At AOA=22° under the action of the leading-edge tubercles, a convective vortex is formed on the suction surface of the modified wingsail, which reduces the flow loss. So the bulges of the wingsail can delay the stall.

scholarly journals To the issue of evaluating sonic boom overpressure and loudness

2019 ◽  
Vol 304 ◽  
pp. 02003
Author(s):  
Igor G. Bashkirov ◽  
Sergey L. Chernyshev ◽  
Vladlen S. Gorbovskoy ◽  
Andrey V. Kazhan ◽  
Vyacheslav G. Kazhan ◽  
...  
Keyword(s):  
Software Package ◽  
Stokes Equations ◽  
Aerodynamic Drag ◽  
Near Field ◽  
Theoretical Data ◽  
Aerodynamic Characteristics ◽  
Sonic Boom ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Computational Mesh

At present, in the world there is a growing interest in the development of a new generation of supersonic passenger aircraft. One of the main problems of creating such aircraft is to ensure both an acceptable sonic boom level and high aerodynamic characteristics in the supersonic cruising mode. This requires the development of reliable methods for obtaining the near field under the plane with taking into account the influence of the boundary layer, calculation of overpressure signature on the ground and evaluation of sonic boom loudness. In this work four variants of the equivalent body of revolution of minimum sonic boom with different nose sharpening were investigated for an aircraft weighing 19 tons in supersonic cruising flight at Mach number of 1.7 and altitude of 15.5 km using the software package for solving the Reynolds–averaged Navier–Stokes equations (RANS) ANSYS CFX. A macro for calculating the overpressure signature on the ground for the distribution of disturbances in the near field under the aircraft and a program for evaluating the sonic boom loudness in various metrics were developed. Computational mesh verification of the results was carried out, the obtained overpressure signatures were compared with theoretical data and calculation results from the software package for the integration of complete system of Euler equations by finite–difference method X–CODE. The effect of the sharpening of the nose part on aerodynamic drag and sound boom characteristics was shown. The work was done in the interests of the international project RUMBLE (RegUlation and norM for low sonic Boom LEvels).

Effect of Blade Tip Modifications for Unducted Propulsors on Tip Vortex-Rotor Interaction Noise

2014 ◽  
Author(s):  
Florian Danner ◽  
Christofer Kendall-Torry
Keyword(s):  
Rotor Blade ◽  
Stokes Equations ◽  
Acoustic Emissions ◽  
Tip Vortex ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Tip Vortices ◽  
Blade Tip ◽  
Blade Loads ◽  
Blade Tips

Front rotor tip vortices impinging on a downstream blade row of an unducted propulsor induce distinct unsteadiness to blade loads with associated sound emissions. Since the region of unsteadiness is concentrated near the blade tips, reducing the rear rotor tip diameter represents a potential means for minimising interaction noise. A survey on the aeroacoustic effects resulting from a cropped rear rotor in combination with a front rotor blade tip modification is therefore presented. Analyses are based on data from computational fluid dynamics solutions with the Reynolds-averaged Navier-Stokes equations and direct acoustic predictions. The evaluation of polar directivities, blade surface pressure disturbances and details of the unsteady flow field provide insight into the underlying phenomena. Results show that an arbitrary reduction of the rear rotor tip diameter does not necessarily decrease noise radiation and that winglet-like structures applied to the front rotor blade tips are capable of reducing acoustic emissions due to tip vortex-rotor interactions.

Numerical Study of Wing Aerodynamics in Ground Proximity

2008 ◽  
Author(s):  
Alex E. Ockfen ◽  
Konstantin I. Matveev
Keyword(s):  
Iterative Process ◽  
Stokes Equations ◽  
Numerical Study ◽  
Ground Effect ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Design And Optimization ◽  
Volume Method ◽  
Experimental Design And Optimization

Experimental design and optimization of innovative ground-effect transportation means is an iterative process which requires a large amount of time and resources. To avoid the large experimental expense, numerical modeling can be used to investigate Wing-in-Ground (WIG) vehicle flight. In this paper, modeling technique is applied for a two dimensional NACA 4412 airfoil in viscous flow in and out of ground effect. The numerical method consists of a steady state, incompressible, finite volume method utilizing the Spalart-Allmaras turbulence model. Grid generation and solution of the Navier-Stokes equations are completed using FLUENT 6.3. The modeling procedures are first validated against published experimental data for unbounded flow around an airfoil. Wing section aerodynamic characteristics are then studied for varying ground heights and two separate boundary conditions: fixed ground and moving ground. Ground effect calculations are compared to several previous studies, and our results are found to correlate with published aerodynamic trends in ground effect, although all studies appear to predict different magnitudes of aerodynamic forces.

Sign in / Sign up

Export Citation Format

Share Document