scholarly journals Study of Convective Flow Effects in Endwall Casing Treatments in Transonic Compressor Rotors

2012 ◽  
Author(s):  
Chunill Hah ◽  
Martin Mueller ◽  
Heinz-Peter Schiffer
Keyword(s):  
Unsteady Flow ◽  
Steady Flow ◽  
Flow Injection ◽  
Flow Simulation ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Circumferential Groove ◽  
Compressor Rotor ◽  
Flow Effects

The unsteady convective flow effects in a transonic compressor rotor with a circumferential-groove casing treatment are investigated in this paper. Experimental results show that the circumferential-groove casing treatment increases the compressor stall margin by almost 50% for the current transonic compressor rotor. Steady flow simulation of the current casing treatment, however, yields only a 15% gain in stall margin. The flow field at near-stall operation is highly unsteady due to several self-induced flow phenomena. These include shock oscillation, vortex shedding at the trailing edge, and interaction between the passage shock and the tip clearance vortex. The primary focus of the current investigation is to assess the effects of flow unsteadiness and unsteady flow convection on the circumferential-groove casing treatment. Unsteady Reynolds-averaged Navier-Stokes (URANS) and Large Eddy Simulation (LES) techniques were applied in addition to steady Reynolds-averaged Navier-Stokes (RANS) to simulate the flow field at near-stall operation and to determine changes in stall margin. The current investigation reveals that unsteady flow effects are as important as steady flow effects on the performance of the circumferential grooves casing treatment in extending the stall margin of the current transonic compressor rotor. The primary unsteady flow mechanism is unsteady flow injection from the grooves into the main flow near the casing. Flows moving into and out of the grooves are caused due to local pressure difference near the grooves. As the pressure field becomes transient due to self-induced flow oscillation, flow injection from the grooves also becomes unsteady. The unsteady flow simulation shows that this unsteady flow injection from the grooves is substantial and contributes significantly to extending the compressor stall margin. Unsteady flows into and out of the grooves have as large a role as steady flows in the circumferential grooves. While the circumferential-groove casing treatment seems to be a steady flow device, unsteady flow effects should be included to accurately assess its performance as the flow is transient at near-stall operation.

Performance enhancement in transonic axial compressors using blade tip injection coupled with casing treatment

2005 ◽  
Vol 219 (5) ◽  
pp. 321-331 ◽  
Author(s):  
B. H. Beheshti ◽  
B Farhanieh ◽  
K Ghorbanian ◽  
J. A. Teixeira ◽  
P. C. Ivey
Keyword(s):  
Flow Injection ◽  
High Speed ◽  
Performance Enhancement ◽  
Three Dimensional ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Blade Tip ◽  
Tip Injection

The casing treatment and flow injection upstream of the rotor tip are two effective approaches in suppressing instabilities or recovering from a fully developed stall. This paper presents numerical simulations for a high-speed transonic compressor rotor, NASA Rotor 37, applying a state-of-the-art design for the blade tip injection. This is characterized by introducing a jet flow directly into the casing treatment machined into the shroud. The casing treatment is positioned over the blade tip region and exceeds the impeller axially by ∼30 per cent of the tip chord both in the upstream and in the downstream directions. To numerically solve the governing equations, the three-dimensional finite element based finite volume method CFD solver CFX-TASCflow (version 2.12.1) is employed. For a compressible flow with varying density, Reynolds-averaging leads to appearance of complicated correlations. To avoid this, the mass-weighted or Favre-averaging is applied. Using an injected mass flow of 2.4 per cent of the annulus flow, the present design can improve stall margin by up to 7 per cent when compared with a smooth casing compressor without tip injection. This research can lead to an optimum design of recirculating casing treatments or other mechanisms for performance enhancement applying tip flow injection.

Numerical Investigation of Casing Treatment Mechanisms With a Conservative Mixed-Cell Approach

2003 ◽  
Author(s):  
H. Yang ◽  
D. Nuernberger ◽  
E. Nicke ◽  
A. Weber
Keyword(s):  
Operating Conditions ◽  
Coupled Flow ◽  
Mixed Cell ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Grid Topology ◽  
The Face ◽  
Overall Efficiency

A conservative mixed-cell approach of second-order accuracy is presented and applied to investigate the mechanisms of a self-recirculating casing treatment coupled with a transonic compressor rotor. The mixed cell is a computational cell that may show up at the zonal interface boundary, the face of which is partially solid and partially fluid, if the azimuthal open area of casing treatment does not fully contact with the whole annulus of blade passage. The mixed-cell approach is essentially an extension of the conservative zonal approach by incorporating special mixed-cell handling at the zonal interface and it allows a great flexibility to the grid generation for the patched zones with the best grid topology. The mixed-cell approach is extremely useful for solving the unsteady interaction problems within turbomachinery and its application for simulating the coupled flow through the rotor and the casing treatment is reported. The calculated results and analysis reveal an effective stall margin extension of the casing treatment herein by weakening or even destroying the tip leakage vortex, and expose the different tip flow topologies between the cases with the casing treatment and with the untreated smooth wall. It is found that the casing treatment only slightly decreases the overall efficiency at the design point, but it is beneficial to the overall efficiency at the off-design operating conditions and it can improve the inflow conditions to the downstream stator blade row as well.

Transonic Compressor Blade Optimization Integrated With Circumferential Groove Casing Treatment

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
Weimin Song ◽  
Yufei Zhang ◽  
Haixin Chen ◽  
Kaiwen Deng
Keyword(s):  
Pressure Ratio ◽  
Compressor Blade ◽  
Superior Performance ◽  
Aerodynamic Optimization ◽  
Stall Margin ◽  
Casing Treatment ◽  
Integrated Optimization ◽  
Transonic Compressor ◽  
Circumferential Groove ◽  
Blade Optimization

A compressor blade integrated with circumferential groove casing treatment (CGCT) is optimized in this study. A hybrid aerodynamic optimization algorithm that combines the differential evolution (DE) with a radial basis function (RBF) response surface is used for the multi-objective optimization via the computational fluid dynamics (CFD) analysis. The sweep and lean distributions are optimized to pursue the maximum total pressure ratio and adiabatic efficiency at the design point. Constraints on the choking mass flow rate and the near-stall compression ratio are imposed to ensure the off-design performance. The performance is improved much more with the blade-CGCT integrated optimization than with the blade-only optimization. The stall margin of the blade-only optimized blade with CGCT added as an afterthought can be even worse than the baseline blade. The CGCT-removal test for the blade-CGCT integrated optimization result further verifies that the superior performance of the blade-CGCT integrated optimization is obtained via optimizing the coupling between the effects of the sweep and lean on the blade loading and the effects of the CGCT on the flow blockage.

A CFD Study of Circumferential Groove Casing Treatments in a Transonic Axial Compressor

2010 ◽  
Author(s):  
Haixin Chen ◽  
Xudong Huang ◽  
Ke Shi ◽  
Song Fu ◽  
Matthew A. Bennington ◽  
...  
Keyword(s):  
Axial Compressor ◽  
Data Sampling ◽  
Stall Margin ◽  
Casing Treatment ◽  
Circumferential Groove ◽  
Compressor Rotor ◽  
Radial Profiles ◽  
Flow Mechanisms ◽  
Transonic Axial Compressor ◽  
And Performance

Numerical investigations were conducted to predict the performance of a transonic axial compressor rotor with circumferential groove casing treatment. The Notre Dame Transonic Axial Compressor (ND-TAC) was simulated by Tsinghua University with an in-house CFD code (NSAWET) for this work. Experimental data from the ND-TAC were used to define the geometry, boundary conditions and data sampling method for the numerical simulation. These efforts, combined with several unique simulation approaches, such as non-matched grid boundary technology to treat the periodic boundaries and interfaces between groove grids and the passage grid, resulted in good agreement between the numerical and experimental results for overall compressor performance and radial profiles of exit total pressure. Efforts were made to study blade level flow mechanisms to determine how the casing treatment impacts the compressor’s stall margin and performance. The flow structures in the passage, the tip gap and the grooves as well as their mutual interactions were plotted and analyzed. The flow and momentum transport across the tip gap in the smooth wall and the casing treatment configurations were quantitatively compared.

Axial-Slot Casing Treatments Improve the Efficiency of Axial Flow Compressors: Aerodynamic Effects of a Rotor Redesign

2013 ◽  
Author(s):  
J. Anton Streit ◽  
Frank Heinichen ◽  
Hans-Peter Kau
Keyword(s):  
Axial Flow ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Negative Effects ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Flow Phenomena ◽  
Casing Treatments

A state-of-the-art transonic compressor rotor has a distinct potential for increased efficiency if modified for improved interaction with an axial-slot type casing treatment. Reducing the number of blades and thus the surface lowers friction losses but increases tip clearance effects and deteriorates the stall margin due to the higher aerodynamic blade loading. The latter two negative effects can be compensated for by the casing treatment, thus restoring the required stall margin and gaining an overall reduction of losses. For the specific compressor rotor under investigation, the potential in polytropic efficiency is as high as 0.7%. The present study was performed using time-accurate CFD (URANS) simulations. Both the reference rotor as well as the modified design are analyzed regarding their interaction with the casing treatment. The traceability of the conclusions is assured by interpreting the detailed flow phenomena. The newly designed rotor is found to be favorably influenced by the casing treatment at design operating conditions whilst the reference only benefits at throttled operating points. Casing treatments are commonly used to broaden the operating range of existing compressors without changing the design of the compressor rotor itself. This study aims to show the possible transformation of this potential in the stall margin into efficiency at design operating conditions by implementing an appropriate rotor design.

A Computational Fluid Dynamics Study of Circumferential Groove Casing Treatment in a Transonic Axial Compressor

2013 ◽  
Vol 136 (3) ◽  
Author(s):  
Haixin Chen ◽  
Xudong Huang ◽  
Ke Shi ◽  
Song Fu ◽  
Mark Ross ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Axial Compressor ◽  
Data Sampling ◽  
Stall Margin ◽  
Casing Treatment ◽  
Circumferential Groove ◽  
Compressor Rotor ◽  
Radial Profiles ◽  
Transonic Axial Compressor

Numerical investigations were conducted to predict the performance of a transonic axial compressor rotor with circumferential groove casing treatment. The Notre Dame Transonic Axial Compressor (ND-TAC) was simulated at Tsinghua University with an in-house computational fluid dynamics (CFD) code (NSAWET) for this work. Experimental data from the ND-TAC were used to define the geometry, boundary conditions, and data sampling method for the numerical simulation. These efforts, combined with several unique simulation approaches, such as nonmatched grid boundary technology to treat the periodic boundaries and interfaces between groove grids and the passage grid, resulted in good agreement between the numerical and experimental results for overall compressor performance and radial profiles of exit total pressure. Efforts were made to study blade level flow mechanisms to determine how the casing treatment impacts the compressor's stall margin and performance. The flow structures in the passage, the tip gap, and the grooves as well as their mutual interactions were plotted and analyzed. The flow and momentum transport across the tip gap in the smooth wall and the casing treatment configurations were quantitatively compared.

scholarly journals Effects of Endwall Suction and Blowing on Compressor Stability Enhancement

1989 ◽  
Author(s):  
N. K. W. Lee ◽  
E. M. Greitzer
Keyword(s):  
Flow Injection ◽  
Axial Compressor ◽  
Pressure Rise ◽  
Primary Objective ◽  
Stall Margin ◽  
Casing Treatment ◽  
Blade Row ◽  
Stall Margin Improvement ◽  
Stability Enhancement ◽  
Suction And Blowing

An experimental investigation was carried out to examine the effects on stall margin of flow injection into, and flow removal out of, the endwall region of an axial compressor blade row. A primary objective of the investigation was clarification of the mechanism by which casing treatment (which involves both removal and injection) suppresses stall in turbomachines. To simulate the relative motion between blade and treatment, the injection and removal took place through a slotted hub rotating beneath a cantilevered stator row. Overall performance data and detailed (time-averaged) flowfield measurements were obtained. Flow injection and removal both increased the stalling pressure rise, but neither was as effective as the wall treatment. Removal of high blockage flow is thus not the sole reason for the observed stall margin improvement in casing or hub treatment, as injection can also contribute significantly to stall suppression. The results also indicate that the increase in stall pressure rise with injection is linked to the streamwise momentum of the injected flow, and it is suggested that this should be the focus of further studies.

scholarly journals Experimental study on water level and absorption capacity in a radial well flow in a loess area

2018 ◽  
Vol 19 (5) ◽  
pp. 1313-1321
Author(s):  
Xuezhen Zhang ◽  
Aidi Huo ◽  
Jucui Wang
Keyword(s):  
Unsteady Flow ◽  
Water Absorption ◽  
Water Level ◽  
Steady Flow ◽  
Flow Injection ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Analysis Method ◽  
Semi Empirical ◽  
Radial Well

Abstract In this paper, the theoretical basis for flow calculation in an injection well was discussed. It proposed that the flow rate of an injection well could be calculated referring to pumping theory and method. A mathematical model of the rising curve of water level around a radial well was established and the equation for calculating the rising curve was given. The calculation equations selected for the water absorption capacity of injection wells were explained and examples were verified and compared. The results indicated that, under the same injection conditions, the water level value calculated by the analysis method was slightly larger, but the error between the analysis method and the semi-theoretical and semi-empirical methods was small. In the processes of steady flow injection and unsteady flow injection, there was a small difference of water absorption capacity, and the former was slightly larger. The measured values of water absorption capacity were only about one-third of the calculated values based on pumping theory. Overall, the analytical solution method for predicting the rising curve of water level has priority in well injection. The semi-theoretical and semi-empirical equation for calculating water absorption capacity sifted first has priority in steady flow injection, the equation sifted second has priority in unsteady flow injection.

Sign in / Sign up

Export Citation Format

Share Document