Effect of Deaerator Parameters on Simple and Reheat Gas/Steam Combined Cycle With Different Cooling Medium

2019 ◽  
Author(s):  
Mayank Maheshwari ◽  
Onkar Singh
Keyword(s):  
Gas Turbine ◽  
Mass Fraction ◽  
Power Plants ◽  
Performance Enhancement ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Inlet Temperature ◽  
Operating Pressure ◽  
Cooling Medium

Abstract Performance of gas/steam combined cycle power plants relies upon the performance exhibited by both gas based topping cycle and steam based bottoming cycle. Therefore, the measures for improving the performance of the gas turbine cycle and steam bottoming cycle eventually result in overall combined cycle performance enhancement. Gas turbine cooling medium affects the cooling efficacy. Amongst different parameters in the steam bottoming cycle, the deaerator parameter also plays its role in cycle performance. The present study analyzes the effect of deaerator’s operating pressure being varied from 1.6 bar to 2.2 bar in different configurations of simple and reheat gas/steam combined cycle with different cooling medium for fixed cycle pressure ratio of 40, turbine inlet temperature of 2000 K and ambient temperature of 303 K with varying ammonia mass fraction from 0.6 to 0.9. Analysis of the results obtained for different combined cycle configuration shows that for the simple gas turbine and reheat gas turbine-based configurations, the maximum work output of 643.78 kJ/kg of air and 730.87 kJ/kg of air respectively for ammonia mass fraction of 0.6, cycle efficiency of 54.55% and 53.14% respectively at ammonia mass fraction of 0.7 and second law efficiency of 59.71% and 57.95% respectively at ammonia mass fraction of 0.7 is obtained for the configuration having triple pressure HRVG with ammonia-water turbine at high pressure and intermediate pressure and steam turbine operating at deaerator pressure of 1.6 bar.

scholarly journals Performance Analysis With Different Means of Cooling in a Combined Cycle

1995 ◽  
Author(s):  
Onkar Singh ◽  
R. Yadav
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Optimum Pressure ◽  
Cooling Medium ◽  
Cooling Technology ◽  
Improved Performance ◽  
Topping Cycle

Combined cycle based power plants and their development and application for energy efficient base load power generation necessitates enforced cooling to maintain the topping cycle gas turbine blade temperature at permissible levels, attributed to the increased turbine inlet temperature and compressor pressure ratio, for the improved performance and reliability of combined cycle. The mathematical model based on expansion path inside gas turbine considering dilution of mainstream and aerodynamic mixing losses for a range of cooling medium has been developed based on internal, film, transpiration cooling technologies and a combination of these. It is found that the appreciation of a cycle configuration as well as the optimum pressure ratio and peak temperature vary significantly with types of cooling technology adopted. Steam cooling for rotor appears to be a very potential cooling medium, when employed with an appropriate cooling technology. This paper deals with the thermodynamic analysis of turbine cooling using, different means of cooling i.e. air, water and steam.

Performance Enhancement of Advanced Combined Cycles

2003 ◽  
Author(s):  
Sanjay ◽  
Onkar Singh ◽  
B. N. Prasad
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Performance Enhancement ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Heat Recovery Steam Generator ◽  
Component Efficiency ◽  
Plant Efficiency

This paper reports on the development requirements of gas/steam combined cycle with an aim to achieve plant efficiency greater than 62% through various development possibilities in gas turbine and steam turbine cycle by taking a reference combined cycle configuration (MS9001H gas turbine and three pressure heat recovery steam generator with reheat). The innovative development possibilities include the advanced inlet design to reduce pressure loss, the increase in turbine inlet temperature, use of advanced turbine blade material, increased component efficiency, improved turbine cooling technologies along with better cooling medium, incorporating intercooling, reheat and regeneration either separately or in combination with simple gas turbine cycle using higher compressor pressure ratio, better utilization of heat recovery steam generator, minimum stack temperature, single shaft system configuration, etc. Based on the quantification of each development item, if incorporated in reference cycle, it has been estimated that the combined cycle as the potential to achieve the plant efficiency in excess of 63%.

Genetic Optimization of Steam Injected Gas Turbine Power Plants

2002 ◽  
Author(s):  
Ibrahim Sinan Akmandor ◽  
O¨zhan O¨ksu¨z ◽  
Sec¸kin Go¨kaltun ◽  
Melih Han Bilgin
Keyword(s):  
Gas Turbine ◽  
Power Output ◽  
Thermal Efficiency ◽  
Gas Turbines ◽  
Power Plants ◽  
Pressure Ratio ◽  
Steam Injection ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Compressor Pressure Ratio

A new methodology is developed to find the optimal steam injection levels in simple and combined cycle gas turbine power plants. When steam injection process is being applied to simple cycle gas turbines, it is shown to offer many benefits, including increased power output and efficiency as well as reduced exhaust emissions. For combined cycle power plants, steam injection in the gas turbine, significantly decreases the amount of flow and energy through the steam turbine and the overall power output of the combined cycle is decreased. This study focuses on finding the maximum power output and efficiency of steam injected simple and combined cycle gas turbines. For that purpose, the thermodynamic cycle analysis and a genetic algorithm are linked within an automated design loop. The multi-parameter objective function is either based on the power output or on the overall thermal efficiency. NOx levels have also been taken into account in a third objective function denoted as steam injection effectiveness. The calculations are done for a wide range of parameters such as compressor pressure ratio, turbine inlet temperature, air and steam mass flow rates. Firstly, 6 widely used simple and combined cycle power plants performance are used as test cases for thermodynamic cycle validation. Secondly, gas turbine main parameters are modified to yield the maximum generator power and thermal efficiency. Finally, the effects of uniform crossover, creep mutation, different random number seeds, population size and the number of children per pair of parents on the performance of the genetic algorithm are studied. Parametric analyses show that application of high turbine inlet temperature, high air mass flow rate and no steam injection lead to high power and high combined cycle thermal efficiency. On the contrary, when NOx reduction is desired, steam injection is necessary. For simple cycle, almost full amount of steam injection is required to increase power and efficiency as well as to reduce NOx. Moreover, it is found that the compressor pressure ratio for high power output is significantly lower than the compressor pressure ratio that drives the high thermal efficiency.

Enhancing Energy and Economic Performances of Combined Cycle Power Plants by Means of Gas-Cycle Regeneration

2014 ◽  
Author(s):  
Roberto Carapellucci ◽  
Lorena Giordano
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Waste Heat ◽  
Pressure Ratio ◽  
Unit Cost ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Inlet Temperature ◽  
Efficiency Gain ◽  
Gas Power Plant

Efficiency improvement in the gas turbine sector has been mainly driven by increasing the turbine inlet temperature and compressor pressure ratio. For a fixed technology level, a further efficiency gain can be achieved through the utilization of waste thermal energy. Regeneration is an internal recovery technique that allows the reduction of heat input required at combustor, by preheating the air at compressor outlet. Under certain operating conditions, the temperature of exhaust gas leaving the regenerator is still enough high to allow the steam production via an heat recovery steam generator (HRSG). Regeneration in steam-gas power plants (CCGT) has the potential to enhance thermal efficiency, but reduces the margins for external recovery and then the bottoming steam cycle capacity. Moreover, the reduction of exhausts temperature at gas turbine outlet requires the reconsideration of HRSG operating parameters, in order to limit the increase of waste heat at the stack. The aim of this study is to explore the potential benefits that regeneration in the gas cycle gives on the whole steam-gas power plant. The extent of energy and economic performances improvement is evaluated, varying the gas turbine specifications and the layout and operating conditions of HRSG. Hence simple and regenerative configurations based on single and multi-pressure HRSG are compared, focusing on efficiency, specific CO2 emissions and unit cost of electricity (COE).

scholarly journals Gas Turbine and Combined Cycle Technologies for Power and Efficiency Enhancement in Power Plants

1994 ◽  
Author(s):  
Meherwan P. Boyce ◽  
Cyrus B. Meher-Homji ◽  
A. N. Lakshminarasimha
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Specific Work ◽  
Efficiency Enhancement ◽  
Turbine Inlet Temperature ◽  
Cycle Efficiency ◽  
Original Equipment Manufacturers

A wide variety of gas turbine based cycles exist in the market today with several technologies being promoted by individual Original Equipment Manufacturers. This paper is focused on providing users with a conceptual framework within which to view these cycles and choose suitable options for their needs. A basic parametric analysis is provided to show the interdependency of Turbine Inlet Temperature (TIT) and Pressure Ratio on cycle efficiency and specific work.

Natural Gas Decarbonization to Reduce CO2 Emission From Combined Cycles—Part II: Steam-Methane Reforming

2000 ◽  
Vol 124 (1) ◽  
pp. 89-95 ◽  
Author(s):  
G. Lozza ◽  
P. Chiesa
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Partial Oxidation ◽  
Power Plants ◽  
Combined Cycle ◽  
Performance Estimation ◽  
Thermodynamic Efficiency ◽  
Methane Reforming ◽  
Operating Pressure ◽  
Carbon Conversion

This paper discusses novel schemes of combined cycle, where natural gas is chemically treated to remove carbon, rather than being directly used as fuel. Carbon conversion to CO2 is achieved before gas turbine combustion. The first part of the paper discussed plant configurations based on natural gas partial oxidation to produce carbon monoxide, converted to carbon dioxide by shift reaction and therefore separated from the fuel gas. The second part will address methane reforming as a starting reaction to achieve the same goal. Plant configuration and performance differs from the previous case because reforming is endothermic and requires high temperature heat and low operating pressure to obtain an elevated carbon conversion. The performance estimation shows that the reformer configuration has a lower efficiency and power output than the systems addressed in Part I. To improve the results, a reheat gas turbine can be used, with different characteristics from commercial machines. The thermodynamic efficiency of the systems of the two papers is compared by an exergetic analysis. The economic performance of natural gas fired power plants including CO2 sequestration is therefore addressed, finding a superiority of the partial oxidation system with chemical absorption. The additional cost of the kWh, due to the ability of CO2 capturing, can be estimated at about 13–14 mill$/kWh.

Optimal Gas-Turbine Design for Hybrid Solar Power Plant Operation

2012 ◽  
Author(s):  
James Spelling ◽  
Björn Laumert ◽  
Torsten Fransson
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Power Plants ◽  
Solar Power ◽  
Pressure Ratio ◽  
Inlet Temperature ◽  
Electricity Cost ◽  
Conflicting Objectives ◽  
Dynamic Simulation Model ◽  
A Minor

A dynamic simulation model of a hybrid solar gas-turbine power plant has been developed, allowing determination of its thermodynamic and economic performance. In order to examine optimum gas-turbine designs for hybrid solar power plants, multi-objective thermoeconomic analysis has been performed, with two conflicting objectives: minimum levelized electricity costs and minimum specific CO2 emissions. Optimum cycle conditions: pressure-ratio, receiver temperature, turbine inlet temperature and flow rate, have been identified for a 15 MWe gas-turbine under different degrees of solarization. At moderate solar shares, the hybrid solar gas-turbine concept was shown to provide significant water and CO2 savings with only a minor increase in the levelized electricity cost.

scholarly journals Thermodynamic Analysis of Different Configurations of Combined Cycle Power Plants

2015 ◽  
Vol 5 (2) ◽  
pp. 89
Author(s):  
Munzer S. Y. Ebaid ◽  
Qusai Z. Al-hamdan
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Maximum Efficiency ◽  
Specific Work ◽  
Slight Effect ◽  
Turbine Engine ◽  
Gas Turbine Cycle ◽  
Cycle Efficiency

<p class="1Body">Several modifications have been made to the simple gas turbine cycle in order to increase its thermal efficiency but within the thermal and mechanical stress constrain, the efficiency still ranges between 38 and 42%. The concept of using combined cycle power or CPP plant would be more attractive in hot countries than the combined heat and power or CHP plant. The current work deals with the performance of different configurations of the gas turbine engine operating as a part of the combined cycle power plant. The results showed that the maximum CPP cycle efficiency would be at a point for which the gas turbine cycle would have neither its maximum efficiency nor its maximum specific work output. It has been shown that supplementary heating or gas turbine reheating would decrease the CPP cycle efficiency; hence, it could only be justified at low gas turbine inlet temperatures. Also it has been shown that although gas turbine intercooling would enhance the performance of the gas turbine cycle, it would have only a slight effect on the CPP cycle performance.</p>

Parameterization of High Solar Share Gas Turbine Systems

2012 ◽  
Author(s):  
Stephan Heide ◽  
Christian Felsmann ◽  
Uwe Gampe ◽  
Sven Boje ◽  
Bernd Gericke ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Planning Process ◽  
Pressure Ratio ◽  
Thermal Power ◽  
Combined Cycle ◽  
Process Models ◽  
Solar Thermal ◽  
Thermal Power Plants ◽  
Solar Thermal Power

Existing solar thermal power plants are based on steam turbine cycles. While their process temperature is limited, solar gas turbine (GT) systems provide the opportunity to utilize solar heat at a much higher temperature. Therefore there is potential to improve the efficiency of future solar thermal power plants. Solar based heat input to substitute fuel requires specific GT features. Currently the portfolio of available GTs with these features is restricted. Only small capacity research plants are in service or in planning. Process layout and technology studies for high solar share GT systems have been carried out and have already been reported by the authors. While these investigations are based on a commercial 10MW class GT, this paper addresses the parameterization of high solar share GT systems and is not restricted to any type of commercial GT. Three configurations of solar hybrid GT cycles are analyzed. Besides recuperated and simple GT with bottoming Organic Rankine Cycle (ORC), a conventional combined cycle is considered. The study addresses the GT parameterization. Therefore parametric process models are used for simulation. Maximum electrical efficiency and associated optimum compressor pressure ratio πC are derived at design conditions. The pressure losses of the additional solar components of solar hybrid GTs have a different adversely effect on the investigated systems. Further aspects like high ambient temperature, availability of water and influence of compressor pressure level on component design are discussed as well. The present study is part of the R&D project Hybrid High Solar Share Gas Turbine Systems (HYGATE) which is funded by the German Ministry for the Environment, Nature and Nuclear Safety and the Ministry of Economics and Technology.

Impact of Inlet Fogging on the Performance of Steam Injected Cooled Gas Turbine Based Combined Cycle Power Plant

2017 ◽  
Author(s):  
Anoop Kumar Shukla ◽  
Onkar Singh
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Film Cooling ◽  
Pressure Ratio ◽  
Steam Injection ◽  
Combined Cycle ◽  
Specific Power ◽  
Temperature Cycle ◽  
Inlet Temperature ◽  
Combined Cycle Power Plant

Gas/steam combined cycle power plants are extensively used for power generation across the world. Today’s power plant operators are persistently requesting enhancement in performance. As a result, the rigour of thermodynamic design and optimization has grown tremendously. To enhance the gas turbine thermal efficiency and specific power output, the research and development work has centered on improving firing temperature, cycle pressure ratio, adopting improved component design, cooling and combustion technologies, and advanced materials and employing integrated system (e.g. combined cycles, intercooling, recuperation, reheat, chemical recuperation). In this paper a study is conducted for combining three systems namely inlet fogging, steam injection in combustor, and film cooling of gas turbine blade for performance enhancement of gas/steam combined cycle power plant. The evaluation of the integrated effect of inlet fogging, steam injection and film cooling on the gas turbine cycle performance is undertaken here. Study involves thermodynamic modeling of gas/steam combined cycle system based on the first law of thermodynamics. The results obtained based on modeling have been presented and analyzed through graphical depiction of variations in efficiency, specific work output, cycle pressure ratio, inlet air temperature & density variation, turbine inlet temperature, specific fuel consumption etc.

Sign in / Sign up

Export Citation Format

Share Document