A Novel Internal Combustion Engine With Simultaneous Injection of Fuel and Pre-Compressed Pre-Heated Air

2002 ◽  
Author(s):  
Mike W. Coney ◽  
Claus Linnemann ◽  
Rob E. Morgan ◽  
Tom G. Bancroft ◽  
Richard M. Sammut
Keyword(s):  
Internal Combustion Engine ◽  
Thermal Loading ◽  
High Efficiency ◽  
Waste Heat ◽  
Cooling System ◽  
Combustion Engine ◽  
Combustion Process ◽  
Internal Combustion ◽  
Heated Air ◽  
Under Construction

A new type of high efficiency reciprocating internal combustion engine is being developed, which has separate cylinders for compression and combustion on a common crankshaft. The combustion air is compressed quasi-isothermally using dense water sprays, preheated using engine waste heat and injected into the combustion chamber simultaneously with the fuel. This novel process is predicted to allow net electrical efficiencies of up to 60%. The present paper focuses on the combustion process and the cooling system of a 3 MW four-cylinder prototype engine, which is currently under construction. This includes development of the design for high thermal loading and for combustion, in which pre-compressed and pre-heated air is introduced into the cylinder simultaneously with the fuel. The overall development is aimed at a 7 MW commercial engine with eight cylinders.

Emissions Control From IC Engines Using Advanced Combustion Chamber Design

1993 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating ◽  
Andrew A. Pouring
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Combustion Engine ◽  
Effective Means ◽  
Combustion Process ◽  
Cost Effective ◽  
Internal Combustion ◽  
Geometry Design ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion phenomena and pollutants emission characteristics have been obtained on an homogeneous-charged internal combustion engine having conventional flat piston and five other bowl-in-piston geometries. The code employed here uses the time marching procedure and solves the governing partial differential equations of multi-component chemically reactive flow by finite difference method. The transient solution is marched out in a sequence of time steps. The results show that the piston geometry affects the local flame properties which subsequently influences the pollutants emission level. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

Piston Geometry Design Effects on Combustion and Emission Characteristics

1991 ◽  
Author(s):  
Ashwani K. Gupta ◽  
Lu Jiang ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Combustion Engine ◽  
Effective Means ◽  
Combustion Process ◽  
Internal Combustion ◽  
Emission Characteristics ◽  
Geometry Design ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion phenomena and pollutants emission characteristics have been obtained on an internal combustion engine having conventional flat piston and advanced piston geometries. The code employed the time marching procedure that solves the governing partial differential equations of multi-component chemically reactive fluid flow by finite difference method. The transient solution is marched out in a sequence of time steps. The results show that both the piston geometry and inlet flow conditions affects the local flame properties which subsequently alters the pollutants emission levels. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for energy conservation and environmental pollution control.

Engineering Aspects of a Novel High Efficiency Reciprocating Internal Combustion Engine

2002 ◽  
Author(s):  
Mike W. Coney ◽  
Andrew M. Cross ◽  
Claus Linnemann ◽  
Robert E. Morgan ◽  
Bruce Wilson
Keyword(s):  
Internal Combustion Engine ◽  
High Efficiency ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Hot Water ◽  
Electrical Efficiency ◽  
New Type ◽  
Industrial Use ◽  
Commercial Applications ◽  
Under Construction

A new type of high efficiency reciprocating internal combustion engine, which is predicted to achieve an electrical efficiency of up to 60% on diesel fuel or 58% on natural gas, is described with particular focus on the engineering of its novel components. The so-called isoengine, which is being developed by Innogy plc, involves quasi-isothermal compression of combustion air. In commercial applications it is envisaged that the engine will run at 600 rpm and produce 7 MW of electric power. The engine will also be capable of producing up to 3 MW of heat in the form of hot water, with the electrical efficiency reduced by two percentage points. The engine is intended for distributed and on-site power generation with the option of switchable co-generation of hot water for industrial use or for space heating. A 3 MWe engineering demonstrator is currently under construction.

scholarly journals Small Cogeneration Unit with Heat and Electricity Storage

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2102
Author(s):  
Josef Stetina ◽  
Michael Bohm ◽  
Michal Brezina
Keyword(s):  
Internal Combustion Engine ◽  
Cooling System ◽  
Combustion Engine ◽  
Catalytic Converter ◽  
Storage System ◽  
Internal Combustion ◽  
Energy Storage System ◽  
Balance Model ◽  
Exhaust Pipe ◽  
Water Storage Tank

A micro cogeneration unit based on a three-cylinder internal combustion engine, Skoda MPI 1.0 L compressed natural gas (CNG), with an output of 25 kW at 3000 RPM is proposed in this paper. It is a relatively simple engine, which is already adopted by the manufacturer to operate on CNG. The engine life and design correspond to the original purpose of use in the vehicle. A detailed dynamic model was created in the GT-SUITE environment and implemented into an energy balance model that includes its internal combustion engine, heat exchangers, generator, battery storage, and water storage tank. The 1D internal combustion engine model provides us with information on engine start-up time, actual effective power, friction power, and the amount of heat going to the cooling system and exhaust pipe. The catalytic converter was removed from the exhaust pipe, and the engine was always operating at full load; thus, engine power control is not considered. An energy storage system for an island operation of the entire power unit for a large, detached house was designed to withstand accumulated energy for a few days in the case of a breakout. To reach a low initial system cost, the possible implementation of worn-out battery packs toward emission reduction in terms of the second life of the battery is proposed. The energy and emission balance are carried out, and the service life of the engine is also discussed.

Sign in / Sign up

Export Citation Format

Share Document