Detailed Results for Nitric Oxide Emissions as Determined From a Multiple-Zone Cycle Simulation for a Spark-Ignition Engine

2002 ◽  
Author(s):  
Jerald A. Caton
Keyword(s):  
Nitric Oxide ◽  
Compression Ratio ◽  
Equivalence Ratio ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Base Case ◽  
Gas Temperature ◽  
Cycle Simulation ◽  
Nitric Oxide Emissions

A thermodynamic cycle simulation was developed for spark-ignition engines which included a formulation using multiple zones for the combustion process and the capability to compute the net nitric oxide (NO) change due to the “thermal” formation mechanism. This simulation was used to complete analyses for a commercial, 5.7 l spark-ignition V-8 engine operating at a part load operating condition at 1400 rpm with an equivalence ratio of 1.0. The engine possessed a compression ratio of 8.1:1, and had a bore and stroke of 101.6 and 88.4 mm, respectively. At the base case conditions, the nitric oxide emissions were 15.7 g/bhp-hr (2903 ppm). The effects of equivalence ratio, combustion duration, spark timing, exhaust gas recirculation, compression ratio, speed and load on nitric oxide changes were examined. Results for instantaneous nitric oxide as a function of crank angle are presented. The use of an adiabatic zone was shown to dramatically increase the nitric oxide levels relative to using the burned gas temperature. For the base case, almost 50% more nitric oxide was computed using the adiabatic temperature relative to the burned gas temperature. The importance of gas temperature, cylinder gas pressure, and composition is illustrated.

First and Second Law Analyses of a Spark-Ignition Engine Using Either Isooctane or Hydrogen: An Initial Assessment

2006 ◽  
Author(s):  
Jerald A. Caton
Keyword(s):  
Nitric Oxide ◽  
Thermal Efficiency ◽  
Equivalence Ratio ◽  
Performance Metrics ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Second Law ◽  
Cycle Simulation ◽  
Nitric Oxide Emissions

The use of either hydrogen or isooctane for a spark-ignition engine was examined using a thermodynamic cycle simulation including the second law of thermodynamics. The engine studied was a 5.7 liter, automotive engine operating from idle to wide open throttle. The hydrogen or isooctane was assumed premixed with the air. Two features of hydrogen combustion that were included in the study were the higher flame speeds (shorter burn durations) and the wider lean flammability limits (lean equivalence ratios). Three cases were considered for the use of hydrogen: (1) standard burn duration and an equivalence ratio of 1.0, (2) a shorter burn duration and an equivalence ratio of 1.0, and (3) a shorter burn duration and variable, lean equivalence ratios. The results included thermal efficiencies, other performance metrics, second law parameters, and nitric oxide emissions. In general, for the cases with an equivalence of 1.0, the brake thermal efficiency was slightly lower for the hydrogen cases due to the higher temperatures and higher heat losses. For the variable, lean equivalence ratio cases, the thermal efficiency was higher for the hydrogen case relative to the isooctane case. Due to the higher temperatures, the hydrogen cases had over 50% higher nitric oxide emissions compared to the isooctane case at the base conditions. In addition, the second law analyses indicated that the destruction of availability during the combustion process was lower for the base hydrogen case (11.2%) relative to the isooctane case (21.1%).

Utilizing a Cycle Simulation to Examine the Use of EGR for a Spark-Ignition Engine Including the Second Law of Thermodynamics

2006 ◽  
Author(s):  
Jerald A. Caton
Keyword(s):  
Combustion Process ◽  
Second Law Of Thermodynamics ◽  
Thermodynamic Cycle ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Second Law ◽  
Base Case ◽  
Nitric Oxides ◽  
Automotive Engine ◽  
Cycle Simulation

The use of exhaust gas recirculation (EGR) for a spark-ignition engine was examined using a thermodynamic cycle simulation including the second law of thermodynamics. Both a cooled and an adiabatic EGR configuration were considered. The engine was a 5.7 liter, automotive engine operating from idle to wide open throttle, and up to 6000 rpm. First, the reduction of nitric oxides is quantified for the base case condition (bmep = 325 kPa, 1400 rpm, φ = 1.0 and MBT timing). Over 90% reduction of nitric oxides is obtained with about 18% EGR for the cooled configuration, and with about 26% EGR for the adiabatic configuration. For constant load and speed, the thermal efficiencies increase with increasing EGR for both configurations, and the results show that this increase is mainly due to decreasing pumping losses and decreasing heat losses. In addition, results from the second law of thermodynamics indicated an increase in the destruction of availability (exergy) during the combustion process as EGR levels increase for both configurations. The major reason for this increase in the destruction of availability was the decrease in the combustion temperatures. Complete results for the availability destruction are provided for both configurations.

A Turbocharged, Spark-Ignition Engine: Results From an Engine Cycle Simulation Including the Second Law of Thermodynamics

2009 ◽  
Author(s):  
Vaibhav J. Lawand ◽  
Jerald A. Caton
Keyword(s):  
Combustion Process ◽  
Engine Performance ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Second Law ◽  
Base Case ◽  
Mixing Processes ◽  
Automotive Engine ◽  
Cycle Simulation

The use of turbocharging systems for spark-ignition engines has seen increased interest in recent years due to the importance of fuel efficiency, and in some cases, increased performance. An example of a possible strategy is to use a smaller displacement engine with turbocharging rather than a larger engine without turbocharging. To better understand the tradeoffs and the fundamental aspects of a turbocharged engine, this investigation is aimed at determining the energy and exergy quantities for a range of operating conditions for a spark-ignition engine. A 3.8 liter automotive engine with a turbocharger and intercooler was selected for this study. Various engine performance and other output parameters were determined as functions of engine speed and load. For the base case (2000 rpm and a bmep of 1200 kPa), the bsfc was about 240 g/kW-h. At these conditions, the second law analysis indicated that the original fuel exergy was distributed as follows: 34.7% was delivered as indicated work, 16.9% was moved via heat transfer to the cylinder walls, 23.0% exited with the exhaust gases, 20.6% was destroyed during the combustion process, 2.5% was destroyed due to inlet mixing processes, and 1.9% was destroyed due to the exhaust processes. The turbocharger components including the intercooler were responsible for less than 1.0% of the fuel exergy destruction or transfer.

A comparative study of the effect of compression ratio on the efficiency and flame development angle in a Cooperative Fuel Research engine fueled with binary gasoline–alcohol blends

2019 ◽  
pp. 146808741985910 ◽  
Author(s):  
Guillermo Rubio-Gómez ◽  
Lis Corral-Gómez ◽  
David Rodriguez-Rosa ◽  
Fausto A Sánchez-Cruz ◽  
Simón Martínez-Martínez
Keyword(s):  
Comparative Study ◽  
Compression Ratio ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Flame Development ◽  
The Impact

In the last few years, increasing concern about the harmful effects of the use of fossil fuels in internal combustion engines has been observed. In addition, the limited availability of crude oil has driven the interest in alternative fuels, especially biofuels. In the context of spark ignition engines, bioalcohols are of great interest owing to their similarities and blend capacities with gasoline. Methanol and ethanol have been widely used, mainly due to their knocking resistance. Another alcohol of great interest is butanol, thanks to its potential of being produced as biofuel and its heat value closer to gasoline. In this study, a comparative study of gasoline–alcohol blend combustion, with up to 20% volume, with neat gasoline has been carried out. A single-cylinder, variable compression ratio, Cooperative Fuel Research-type spark ignition engine has been employed. The comparison is made in terms of fuel conversion efficiency and flame development angle. Relevant information related to the impact in the combustion process of the use of the three main alcohols used in blends with gasoline has been obtained.

A Multiple-Zone Cycle Simulation for Spark-Ignition Engines: Thermodynamic Details

2001 ◽  
Author(s):  
Jerald A. Caton
Keyword(s):  
Combustion Process ◽  
Load Condition ◽  
Engine Performance ◽  
Thermodynamic Cycle ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Engine Operation ◽  
Part Load ◽  
Cycle Simulation ◽  
The Individual

Abstract A thermodynamic cycle simulation was developed for a spark-ignition engine which included the use of multiple zones for the combustion process. This simulation was used to complete analyses for a commercial, spark-ignition V-8 engine operating at a part load condition. Specifically, the engine possessed a compression ratio of 8.1:1, and had a bore and stroke of 101.6 and 88.4 mm, respectively. A part load operating condition at 1400 rpm with an equivalence ratio of 1.0 was examined. Results were obtained for overall engine performance, for detailed in-cylinder events, and for the thermodynamics of the individual processes. In particular, the characteristics of the engine operation with respect to the combustion process were examined. Implications of the multiple zones formulation for the combustion process are described.

Sign in / Sign up

Export Citation Format

Share Document