scholarly journals A First Application of Thermographic Phosphors in a Marine Two-Stroke Diesel Engine for Surface Temperature Measurement

2014 ◽  
Author(s):  
Fahd Abou Nada ◽  
Johan Hult ◽  
Christoph Knappe ◽  
Mattias Richter ◽  
Stefan Mayer ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Coating Thickness ◽  
Surface Coating ◽  
Cylinder Wall ◽  
Load Range ◽  
Marine Research ◽  
Surface Temperature Measurement ◽  
Thermographic Phosphors ◽  
Phosphor Thermometry ◽  
First Time

Phosphor thermometry is applied for the first time in a large-bore two-stroke diesel engine. The work proves the practicality of phosphor thermometry in large-bore engines. The experiments were conducted on the MAN 4T50ME-X marine research engine equipped with an optical cylinder head. By employing a thin surface coating of CdWO4 phosphor, cycle resolved temperature measurements of the cylinder wall were obtained. Motored and fired engine operations were tested at engine loads covering the low and medium engine load range. Phosphor thermometry proved to be successful in retrieving the temperature with standard deviations ranging around 1–8 K. Experimental considerations like detector linearity, coating thickness and an automated phosphor calibration routine will be addressed.

Experimental and numerical investigations on novel models for mechanical behaviors of the elastic ring in aero-engine

2021 ◽  
pp. 095440622110130
Author(s):  
Zhong Luo ◽  
Lei Li ◽  
Yang Yang ◽  
Xiaojie Hou ◽  
Jiaxi Liu ◽  
...  
Keyword(s):  
3D Model ◽  
Maximum Stress ◽  
Simple Structure ◽  
Experimental Testing ◽  
Axial Direction ◽  
Elastic Ring ◽  
Load Range ◽  
Aero Engine ◽  
Stiffness Characteristics ◽  
First Time

The elastic ring is widely used in elastic support structures of aero-engine because of its simple structure and convenient manufacturing. In this paper, two elastic ring models, 3D and 2D models, are proposed, where the fillets between the bulges and ring are considered. The 2D model is more efficient for the calculation of stiffness characteristics. The 3D model can be used to obtain the maximum stress position in the axial direction. Then the experimental testing is carried out to verify the accuracy and effectiveness of the proposed models. Based on the proposed models, the stiffness nonlinearity and critical load of the elastic ring are found for the first time, which can be used to determine the normal working load range. Moreover, the elastic ring models with and without fillets are developed, and the effect of the fillets on stress is discussed. The results show that the stress is reduced by considering the fillets, which are not considered in the existing literature.

scholarly journals Experimental and Simulation of Diesel Engine Fueled with Biodiesel with Variations in Heat Loss Model

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1622
Author(s):  
Daniel Romeo Kamta Legue ◽  
Zacharie Merlin Ayissi ◽  
Mahamat Hassane Babikir ◽  
Marcel Obounou ◽  
Henri Paul Ekobena Fouda
Keyword(s):  
Heat Release ◽  
Heat Loss ◽  
Heat Release Rate ◽  
Release Rate ◽  
Diffusion Combustion ◽  
Cylinder Wall ◽  
Compression Ignition Engine ◽  
Experimental Conditions ◽  
Load Range ◽  
Combustion Phase

This study presents an experimental investigation and thermodynamic 0D modeling of the combustion of a compression-ignition engine, fueled by an alternative fuel based on neem biodiesel (B100) as well as conventional diesel (D100). The study highlights the effects of the engine load at 50%, 75% and 100% and the influence of the heat loss models proposed by Woschni, Eichelberg and Hohenberg on the variation in the cylinder pressure. The study shows that the heat loss through the cylinder wall is more pronounced during diffusion combustion regardless of the nature of the fuels tested and the load range required. The cylinder pressures when using B100 estimated at 89 bars are relatively higher than when using D100, about 3.3% greater under the same experimental conditions. It is also observed that the problem of the high pressure associated with the use of biodiesels in engines can be solved by optimizing the ignition delay. The net heat release rate remains roughly the same when using D100 and B100 at 100% load. At low loads, the D100 heat release rate is higher than B100. The investigation shows how wall heat losses are more pronounced in the diffusion combustion phase, relative to the premix phase, by presenting variations in the curves.

scholarly journals MODIFYING MATHEMATICAL MODELS FOR CALCULATING OPERATIONAL CHARACTERISTICS OF DIESEL ENGINES BURNING RME BIOFUELS / MATEMATINIŲ MODELIŲ PRITAIKYMAS DYZELIŲ, DIRBANČIŲ RME BIODEGALAIS, DARBO PROCESUI IR EKSPLOATACINIAMS RODIKLIAMS SKAIČIUOTI / ДОРАБОТКА МАТЕМАТИЧЕСКИХ МОДЕЛЕЙ РАСЧЕТА ПОКАЗАТЕЛЕЙ РАБОТЫ ДИЗЕЛЯ НА БИОДИЗЕЛИНАХ РРМЭ

Transport ◽  
2011 ◽  
Vol 26 (1) ◽  
pp. 50-60 ◽  
Author(s):  
Sergejus Lebedevas ◽  
Galina Lebedeva ◽  
Kristina Bereišienė
Keyword(s):  
Diesel Engine ◽  
Mathematical Modelling ◽  
Mathematical Models ◽  
Diesel Engines ◽  
Fuel Injection ◽  
Internal Heat ◽  
Computer Programs ◽  
Toxic Substances ◽  
Load Range ◽  
Operational Characteristics

The article considers and solves the problems of adapting the mathematical models, used in calculating operational characteristics of diesel engines burning mineral diesel oil, to engines converted to RME biofuels. The analysis of mathematical models of calculating the main technical and economic characteristics of diesel engines as well as the parameters of the in-cylinder process and the concentration of toxic substances in the exhaust gases is performed. The need for adjusting the calculation algorithms is also demonstrated. The computer programs based on single-zone thermodynamic models are used in the research. The programs of mathematical modelling are modified, i.e. supplemented with the algorithm for calculating energy characteristics of the combustion products (e.g. specific heat capacity, internal heat, the lower calorific value, etc.). Based on the computer programs, modified for examining diesel engines burning biofuels, the computer-aided mathematical modelling experiment is carried out. The results of modelling are compared with the data obtained in testing the diesel engine 1A41. The mathematical modelling performed demonstrates the accuracy acceptable for solving practical problems: the difference between the obtained calculation results and diesel engine testing data for the load range of (1.0÷0.5) Pi nom does not exceed ± 5÷7%. Higher accuracy of modelling the characteristics of diesel engines, operating in the low- and medium-load modes, may be accounted for by the adjustment of the algorithm for calculating the induction period and the on-set phase of fuel injection. Santrauka Publikacijoje pateikti dyzelio darbo proceso ir eksploatacinių rodiklių skaičiavimo matematinių modelių tobulinimo rezultatai, siekiant matematinius modelius pritaikyti dyzeliui dirbant riebiųjų rūgščių metilesterių, taip pat RME, biodegalais. Atlikta skaičiavimo algoritmų analizė ir pagrįsti pagrindiniai jų tobulinimo aspektai. Sukurtas kompiuterinis programinis modelis, skirtas darbinio kūno dyzelio cilindre energiniams parametrams skaičiuoti (specifinei šilumai, vidinei energijai), dyzeliui dirbant plačiąja elementinės cheminės sudėties biodegalų gama. Atliktas 1A41 dyzelio techninių ir ekonominių bei ekologinių rodiklių modeliavimas kompiuteriu, naudojant patobulintus matematinius modelius. Parodytas gautų rezultatų, pakankamų praktiniams uždaviniams spręsti, tikslumas: dyzeliui dirbant artimos nominaliosios apkrovos režimais (1,0÷0,5) Pi nom skirtumas tarp skaičiavimo ir dyzelio motorinių tyrimų rezultatų neviršija ±5÷7%. Dyzeliui dirbant mažos apkrovos režimu, matematinio modeliavimo rezultatų adekvatumo didinimas susijęs su kuro įpurškimo fazės bei savaiminio užsiliepsnojimo indukcijos periodo skaičiavimo algoritmo tobulinimu. Резюме Рассмотрены и решены задачи адаптации математических моделей расчета показателей дизеля при переводе их работы с минерального дизелина на биодизелины метилового эфира рапсового масла (МЭРМ). Выполнен анализ и дано обоснование направлений доработки расчетных алгоритмов ряда однозонных термодинамических математических моделей, используемых в практике исследования эксплуатационных показателей, параметров индикаторного процесса и эмиссии токсичных компонентов в выхлопных газах дизелей. В форме программного модуля составлен алгоритм расчета энергетических параметров рабочего тела в цилиндре (удельной теплоемкости, теплоты сгорания, внутренней энергии) для топлив с широким элементарным химическим составом. С использованием доработанных компьютерных программ выполнен широкий расчетный эксперимент и сопоставлены его результаты с данными моторных стендовых испытаний одноцилиндрового отсека дизеля 1А41. Показана приемлемая для решения практических задач точность математического моделирования: для нагрузочных режимов (1÷0,5) Pmi расхождения расчетных и экспериментальных значений параметров работы дизеля не превышают ±5÷7%. Повышение качества моделирования показателей дизеля на режимах средних и малых нагрузок связано с уточнением алгоритма расчета периода индукции и фазы начала видимого горения топлива в цилиндре.

OPTIMIZATION OF GAS-DIESEL ENGINE REGULATION AS A METHOD OF IMPROVING ITS ECOLOGICAL CHARACTERISTICS

2021 ◽  
pp. 28-32
Author(s):  
VALERIY L. CHUMAKOV ◽  
Keyword(s):  
Carbon Monoxide ◽  
Diesel Engine ◽  
Nitrogen Oxides ◽  
Diesel Fuel ◽  
Hydrocarbon Fuel ◽  
Load Range ◽  
Engine Operation ◽  
Exhaust Gases ◽  
Wide Range ◽  
Diesel Cycle

The paper shows some ways to improve the environmental characteristics of a diesel engine using gaseous hydrocarbon fuel and operating the engine in a gas-diesel cycle mode. Some possibilities to reduce toxic components of exhaust gases in a gas-diesel engine operating on liquefi ed propane-butane mixtures have been studied. Experiments carried out in a wide range of load from 10 to 100% and speed from 1400 to 2000 rpm showed that the gas-diesel engine provides a suffi ciently high level of diesel fuel replacement with gas hydrocarbon fuel. The authors indicate some eff ective ways to reduce the toxicity of exhaust gases. The engine power should be adjusted by the simultaneous supply of fuel, gas and throttling the air charge in the intake manifold. This method enriches the fi rst combusting portions to reduce nitrogen oxides and maintains the depletion of the main charge within the fl ammability limits of the gas-air charge to reduce carbon monoxide and hydrocarbons. The authors found that when the engine operates in a gas-diesel cycle mode, the power change provides a decrease in nitrogen oxide emissions of gas-diesel fuel only due to gas supply in almost the entire load range as compared to the pure diesel. At high loads (more than 80%) stable engine operation is ensured up to 90% of diesel fuel replaced by gas. Even at 10% of diesel fuel used the concentration of nitrogen oxides decreases by at least 15…20% as compared with a diesel engine in the entire load range. However, there is an increased emission of hydrocarbons and carbon monoxide in the exhaust gases. Further experimental studies have shown that optimization of the gas diesel regulation can reduce the mass emission of nitrogen oxides contained in exhaust gases in 2…3 times and greatly reduce the emission of incomplete combustion products – carbon monoxide and hydrocarbons.

The analyses of frictional losses and thermal stresses in a diesel engine piston coated with different thicknesses of thermal barrier films using co-simulation method

2021 ◽  
pp. 146808742110656
Author(s):  
Fatma Bayata ◽  
Cengiz Yildiz
Keyword(s):  
Diesel Engine ◽  
Coating Thickness ◽  
Thermal Stresses ◽  
Equivalent Stress ◽  
Simulation Method ◽  
Thermal Barrier ◽  
Barrier Films ◽  
Engine Piston ◽  
Frictional Performance ◽  
Artificial Neural Network Ann

This study comparatively presents the thermal and mechanical effects of different Thermal Barrier Coatings (TBCs) and their thicknesses on the performance of aluminum diesel engine piston by combining Finite Element Analyses (FEA) and Artificial Neural Network (ANN) methods. The piston structure of MWM TbRHS 518S indirect injection six-cylinder diesel engine was modeled. The clustered TBCs (NiCrAlY–Gd2Zr2O7, NiCrAlY–MgO-ZrO2, NiCrAl–Yttria Partially Stabilized Zirconia (YPSZ), and NiCrAlY–La2Zr2O7) were implemented to the related surface of aluminum alloy piston and then static, thermal, and transient structural FEA were conducted for each model. Based on both of the temperature and equivalent stress distributions, NiCrAlY–Gd2Zr2O7 coated model displayed the best performance. Additionally, the effects of top coating thicknesses of TBCs were investigated in the range of 0.1–1.0 mm with 0.1 mm increments in FEAs. The thermally effective top coating thickness was predicted as 0.95 mm for the selected TBC using ANN method. Then the effects of coating thickness on frictional performance were revealed by generating transient structural FE models and utilizing stribeck diagram. The uncoated and 0.95 mm NiCrAlY–Gd2Zr2O7 coated models were adjusted as transient and the related crank angle – dependent in-cylinder combustion pressure data was implemented. The friction force was reduced by at least 15% in NiCrAlY–Gd2Zr2O7 coated model.

A spherical surface coating thickness model for a robotized thermal spray system

2019 ◽  
Vol 59 ◽  
pp. 297-304 ◽  
Author(s):  
Yanjun Zhang ◽  
Wenbo Li ◽  
Chao Zhang ◽  
Hanlin Liao ◽  
Yicha Zhang ◽  
...  
Keyword(s):  
Thermal Spray ◽  
Coating Thickness ◽  
Surface Coating ◽  
Spherical Surface ◽  
Spray System

Renewable Fuel Performance in a Legacy Military Diesel Engine

2011 ◽  
Author(s):  
Leonard J. Hamilton ◽  
Sherry A. Williams ◽  
Richard A. Kamin ◽  
Matthew A. Carr ◽  
Patrick A. Caton ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Vegetable Oil ◽  
Ignition Delay ◽  
Jet Fuel ◽  
Combustion Characteristics ◽  
Load Range ◽  
Engine Torque ◽  
Brake Torque ◽  
Renewable Fuel

A new Hydrotreated Vegetable Oil (HVO) from the camelina plant has been processed into a Hydrotreated Renewable Jet (HRJ) fuel. This HRJ fuel was tested in an extensively instrumented legacy military diesel engine along with conventional Navy jet fuel JP-5. Both fuels performed well across the speed-load range of this HMMWV engine. The high cetane value of the HRJ leads to modestly shorter ignition delay. The longer ignition delay of JP-5 delivers shorter overall combustion durations, with associated higher indicated engine torque levels. Both brake torque and brake fuel consumption are better with conventional JP-5 by up to ten percent, due to more ideal combustion characteristics.

Sign in / Sign up

Export Citation Format

Share Document