Electrolytic Recycling of a Carbonate Salt in a Process With a Dissolution of Spent Nuclear Fuel in a Strong Alkaline Carbonate Media

2007 ◽  
Author(s):  
Kwang-Wook Kim ◽  
In-Tae Kim ◽  
Seong-Min Kim ◽  
Yeon-Hwa Kim ◽  
Eil-Hee Lee ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Carbonate Solution ◽  
Spent Fuel ◽  
Waste Solution ◽  
High Alkalinity ◽  
High Level ◽  
Minimal Generation ◽  
Alkaline Carbonate ◽  
Carbonate Salt

A removal of only uranium from spent nuclear fuel with the concepts of a high proliferation-resistance and a minimal generation of waste is helpful for a spent fuel management in view of a volume reduction of the high level radioactive waste generated from the spent fuel treatment. That can be accomplished by a process using a selective oxidative dissolution of the spent fuel in a carbonate solution of high alkalinity. In this work, an electrolytic method for a decarbonation and a recovery of CO2 for recycling the used carbonate solution contaminated with some impurity metal ions generated in such a process with a concept of zero-release of waste solution was studied. A carbonate solution generated from such a system was confirmed to be completely recycled within the system, while the impurity ions being separated from the carbonate solution.

Centralization of Canada’s Spent Nuclear Fuel

2013 ◽  
Author(s):  
Krista Nicholson ◽  
John McDonald ◽  
Shona Draper ◽  
Brian M. Ikeda ◽  
Igor Pioro
Keyword(s):  
Nuclear Fuel ◽  
Site Selection ◽  
Nuclear Power ◽  
Power Plants ◽  
Spent Nuclear Fuel ◽  
Selection Process ◽  
Spent Fuel ◽  
Geologic Repository ◽  
Candu Reactors ◽  
High Level

Currently in Canada, spent fuel produced from Nuclear Power Plants (NPPs) is in the interim storage all across the country. It is Canada’s long-term strategy to have a national geologic repository for the disposal of spent nuclear fuel for CANada Deuterium Uranium (CANDU) reactors. The initial problem is to identify a means to centralize Canada’s spent nuclear fuel. The objective of this paper is to present a solution for the transportation issues that surround centralizing the waste. This paper reviews three major components of managing and the transporting of high-level nuclear waste: 1) site selection, 2) containment and 3) the proposed transportation method. The site has been selected based upon several factors including proximity to railways and highways. These factors play an important role in the site-selection process since the location must be accessible and ideally to be far from communities. For the containment of the spent fuel during transportation, a copper-shell container with a steel structural infrastructure was selected based on good thermal, structural, and corrosion resistance properties has been designed. Rail has been selected as the method of transporting the container due to both the potential to accommodate several containers at once and the extensive railway system in Canada.

Near field evolution of a spent fuel repository in an argillaceous rock formation and impact on radionuclide migration

2020 ◽  
Author(s):  
Vanessa Montoya ◽  
Orlando Silva ◽  
Emilie Coene ◽  
Jorge Molinero ◽  
Renchao Lu ◽  
...  
Keyword(s):  
Ion Exchange ◽  
Radioactive Waste ◽  
Nuclear Fuel ◽  
Reactive Transport ◽  
Spent Nuclear Fuel ◽  
Near Field ◽  
Spent Fuel ◽  
Exchange Reactions ◽  
Radionuclide Migration ◽  
High Level

<p>In August 2015, the German government approved the national programme for the responsible and safe management of spent nuclear fuel (SNF) and radioactive waste proposed by the Federal Ministry for the Environment, Nature Conservation, Building and Reactor Safety (BMU). The assumption is that about ~ 1 100 storage casks (10 500 tons of heavy metal) in the form of spent fuel assemblies will be generated in nuclear power plants and will have to be disposed. However, a decision on the disposal concept for high-level waste is pending and an appropriate solution has to be developed with a balance in multiple aspects. All potential types of host rocks, clay and salt stones as well as crystalline formations are under consideration. In the decision process, evaluation of the risk of different waste management options and scenarios play an enormous role in the discussion. Coupled physical and chemical processes taking place within the engineered barrier system of a repository for high-level radioactive waste will define the radionuclide mobility/retention and the possible radiological impact. The objective of this work is to assess coupled processes occurring in the near-field of a generic repository for spent nuclear fuel in a high saline clay host rock, integrating complex geochemical processes at centimetre-scale. The scenario considers that radionuclides can be released during a period of thousands of years after full saturation of the bentonite barrier and the thermal phase.</p><p>Transport parameters and the discretization of the system, are implemented in a 2D axisymmetric geometry. The multi-barrier system is emplaced in clay and a solubility limited source term for the selected radionuclides is assumed. Kinetics and chemical equilibria reactions are simulated using parameters obtained from experiments. Additionally, porosity changes due to mineral precipitation/dissolution and feedback on the effective diffusion coefficient are taken into account. Protonation/deprotonation, ion exchange reactions and radionuclide inner-sphere sorption is considered.</p><p>Numerical simulations show, that, when the canister corrosion starts, the redox potential decreases, magnetite precipitates and H<sub>2</sub> is formed. Furthermore, the aqueous concentration of Fe(II) increases due to the presence of magnetite. By considering binding to montmorillonite via ion exchange reactions, the bentonite acts as a sink for Fe(II). Additionally, magnetite forms a chemical barrier offering significant sorption capacity for many radionuclides. Finally, a decrease of porosity in the bentonite/canister interface leads to a further deceleration of radionuclide migration. Due to the complexity of reactive transport processes in saline environments, benchmarking of reactive transport models (RTM) is important also to build confidence in those modelling approaches. Development of RTM benchmark procedures is part of the iCROSS project (Integrity of nuclear waste repository systems - Cross-scale system understanding and analysis) funded by both the Helmholtz Association and the Federal Ministry of Education and Research (BMBF).</p><p> </p>

Simulation and Analysis: The Dose Distribution of KBS-3 Spent Nuclear Fuel Canister by MCNP

2010 ◽  
Author(s):  
Bo Yang ◽  
He-xi Wu ◽  
Yi-bao Liu
Keyword(s):  
Cast Iron ◽  
Radioactive Waste ◽  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Spent Nuclear Fuel ◽  
Ductile Cast Iron ◽  
Nuclear Industry ◽  
Spent Fuel ◽  
High Level

With the sustained and rapid development of the nuclear power plants, the spent fuel which is produced by the nuclear power plants will be rapidly rising. Spent fuel is High-level radioactive waste and should be disposed safely, which is important for the environment of land, public safety and health of the nuclear industry, the major issues of sustainable development and it is also necessary part for the nuclear industry activities. It is important to study and resolve the high-level radioactive waste repository problem. Spent nuclear fuel is an important component in the radioactive waste, The KBS-3 canister for geological disposal of spent nuclear fuel in Sweden consists of a ductile cast iron insert and a copper shielding. The ductile cast iron insert provides the mechanical strength whereas the copper protects the canister from corrosion. The canister inserts material were referred to as I24, I25 and I26, Spent nuclear fuel make the repository in high radiant intensity. The radiation analysis of canister insert is important in canister transport, the dose analysis of repository and groundwater radiolysis. Groundwater radiolysis, which produces oxidants (H2O2 and O2), will break the deep repository for spent nuclear fuel. The dose distribution of canister surface with different kinds of canister inserts (I24, I25 and I26) is calculated by MCNP (Ref. 1). Analysing the calculation results, we offer a reference for selecting canister inserts material.

Integrated Model of Korean Spent Fuel and High Level Waste Disposal Options

2009 ◽  
Author(s):  
Yongsoo Hwang ◽  
Ian Miller
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Near Field ◽  
Integrated Model ◽  
High Level Waste ◽  
Spent Fuel ◽  
Parameter Uncertainties ◽  
Design Concepts ◽  
High Level

This paper describes an integrated model developed by the Korean Atomic Energy Research Institute (KAERI) to simulate options for disposal of spent nuclear fuel (SNF) and reprocessing products in South Korea. A companion paper (Hwang and Miller, 2009) describes a systems-level model of Korean options for spent nuclear fuel (SNF) management in the 21’st century. The model addresses alternative design concepts for disposal of SNF of different types (CANDU, PWR), high level waste, and fission products arising from a variety of alternative fuel cycle back ends. It uses the GoldSim software to simulate the engineered system, near-field and far-field geosphere, and biosphere, resulting in long-term dose predictions for a variety of receptor groups. The model’s results allow direct comparison of alternative repository design concepts, and identification of key parameter uncertainties and contributors to receptor doses.

United States high-level radioactive waste management programme: Current status and plans

1997 ◽  
Vol 211 (5) ◽  
pp. 381-392 ◽  
Author(s):  
J A Richardson
Keyword(s):  
United States ◽  
Radioactive Waste ◽  
Waste Management ◽  
Nuclear Fuel ◽  
Nuclear Waste ◽  
Spent Nuclear Fuel ◽  
Management Programme ◽  
Spent Fuel ◽  
Dry Storage ◽  
High Level

Commercial reactor nuclear power generation in the United States is produced by 107 units and, during 1996, represented over 21 per cent of the nation's electricity generation in 34 of the 50 states and, through electric power wheeling, between states in most of the 48 contiguous states. Spent fuel is stored in fuel pools at 70 sites around the country and the projected rate of spent fuel production indicates that the current pool storage will be exceeded in the out years of 2000, 2010 and 2020 at 40, 67 and 69 of these sites respectively. The total accumulation projected by the end of 1996 at reactor sites is 33 700 metric tons of heavy metal (MTHM), with projections for increasing accumulations at annual rates of between 1800 and 2000 to produce an end of life for all commercial nuclear reactors of about 86 000 MTHM. There are presently eight facilities in six states with out-of-pool dry storage amounting to 1010 MTHM and this dry storage demand will increase. Based on all current commercial reactors achieving their 40 year licensed operation lifetimes, the dry storage needs will increase to 3128 MTHM at 28 sites and 20 states by 2000 and 11 307 MTHM at 58 sites in 32 states by 2010; the year 2010 is the present scheduled operation date for the federal mined geological disposal repository being characterized by the USDOE at Yucca Mountain, Nevada. The enabling statute for the federal high-level radioactive waste management programme is the 1982 Nuclear Waste Policy Act (NWPA) which charges the USDOE with the responsibility for the disposal of HLW and spent nuclear fuel. The Act also charges the utilities with the responsibility for managing their spent nuclear fuel until the USDOE can accept it into the federal waste management system. The funding for the federal programme is also stipulated by the Act with the creation of the Nuclear Waste Fund, through which the electric utilities entered into contract with the USDOE by payment of a fee of 1 mill per kilowatt hour sold and for which the USDOE would start collection of spent fuel from the reactor sites starting 31 January 1998.

scholarly journals German Spent Nuclear Fuel Legacy: Characteristics and High-Level Waste Management Issues

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
A. Schwenk-Ferrero
Keyword(s):  
Nuclear Fuel ◽  
Power Plants ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Fission Products ◽  
High Level Waste ◽  
Minor Actinides ◽  
Spent Fuel ◽  
Cycle Simulation ◽  
High Level

Germany is phasing-out the utilization of nuclear energy until 2022. Currently, nine light water reactors of originally nineteen are still connected to the grid. All power plants generate high-level nuclear waste like spent uranium or mixed uranium-plutonium dioxide fuel which has to be properly managed. Moreover, vitrified high-level waste containing minor actinides, fission products, and traces of plutonium reprocessing loses produced by reprocessing facilities has to be disposed of. In the paper, the assessments of German spent fuel legacy (heavy metal content) and the nuclide composition of this inventory have been done. The methodology used applies advanced nuclear fuel cycle simulation techniques in order to reproduce the operation of the German nuclear power plants from 1969 till 2022. NFCSim code developed by LANL was adopted for this purpose. It was estimated that ~10,300 tonnes of unreprocessed nuclear spent fuel will be generated until the shut-down of the ultimate German reactor. This inventory will contain ~131 tonnes of plutonium, ~21 tonnes of minor actinides, and 440 tonnes of fission products. Apart from this, ca.215 tonnes of vitrified HLW will be present. As fission products and transuranium elements remain radioactive from 104to 106years, the characteristics of spent fuel legacy over this period are estimated, and their impacts on decay storage and final repository are discussed.

Chemical Effects at the Reaction Front in Corroding Spent Nuclear Fuel

2006 ◽  
Vol 985 ◽  
Author(s):  
Jeffrey A. Fortner ◽  
A. Jeremy Kropf ◽  
James L. Jerden ◽  
James C. Cunnane
Keyword(s):  
Transition Zone ◽  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Aqueous Environment ◽  
Spent Fuel ◽  
Aqueous Corrosion ◽  
Reduction Potentials ◽  
Chemical Effects ◽  
Before And After ◽  
X Ray Absorption

AbstractPerformance assessment models of the U. S. repository at Yucca Mountain, Nevada suggest that neptunium from spent nuclear fuel is a potentially important dose contributor. A scientific understanding of how the UO2 matrix of spent nuclear fuel impacts the oxidative dissolution and reductive precipitation of Np is needed to predict the behavior of Np at the fuel surface during aqueous corrosion. Neptunium would most likely be transported as aqueous Np(V) species, but for this to occur it must first be oxidized from the Np(IV) state found within the parent spent nuclear fuel. In this paper we present synchrotron x-ray absorption spectroscopy and microscopy findings that illuminate the resultant local chemistry of neptunium and plutonium within uranium oxide spent nuclear fuel before and after corrosive alteration in an air-saturated aqueous environment. We find the Pu and Np in unaltered spent fuel to have a +4 oxidation state and an environment consistent with solid-solution in the UO2 matrix. During corrosion in an air-saturated aqueous environment, the uranium matrix is converted to uranyl (UO22+) mineral assemblage that is depleted in Np and Pu relative to the parent fuel. The transition from U(IV) in the fuel to a fully U(VI) character across the corrosion front is not sharp, but occurs over a transition zone of ∼ 50 micrometers. We find evidence of a thin (∼ 20 micrometer) layer that is enriched in Pu and Np within a predominantly U(IV) environment on the fuel side of the transition zone. These experimental observations are consistent with available data for the standard reduction potentials for NpO2+/Np4+ and UO22+/U4+ couples, which indicate that Np(IV) may not be effectively oxidized to Np(V) at the corrosion potential of uranium dioxide spent nuclear fuel in air-saturated aqueous solutions.

scholarly journals The Need for Integrating the Back End of the Nuclear Fuel Cycle in the United States of America

MRS Advances ◽  
2018 ◽  
Vol 3 (19) ◽  
pp. 991-1003 ◽  
Author(s):  
Evaristo J. Bonano ◽  
Elena A. Kalinina ◽  
Peter N. Swift
Keyword(s):  
United States ◽  
Nuclear Fuel ◽  
United States Of America ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Nuclear Fuel Cycle ◽  
The United States ◽  
Spent Fuel ◽  
Dry Storage ◽  
The Us

ABSTRACTCurrent practice for commercial spent nuclear fuel management in the United States of America (US) includes storage of spent fuel in both pools and dry storage cask systems at nuclear power plants. Most storage pools are filled to their operational capacity, and management of the approximately 2,200 metric tons of spent fuel newly discharged each year requires transferring older and cooler fuel from pools into dry storage. In the absence of a repository that can accept spent fuel for permanent disposal, projections indicate that the US will have approximately 134,000 metric tons of spent fuel in dry storage by mid-century when the last plants in the current reactor fleet are decommissioned. Current designs for storage systems rely on large dual-purpose (storage and transportation) canisters that are not optimized for disposal. Various options exist in the US for improving integration of management practices across the entire back end of the nuclear fuel cycle.

Sign in / Sign up

Export Citation Format

Share Document