A New Developed Interface for CAD/MCNP Data Conversion

2006 ◽  
Author(s):  
Noha Shaaban ◽  
Fukuzo Masuda ◽  
Hesham Nasif ◽  
Masao Yamada ◽  
Hidenori Sawamura ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Geometric Modeling ◽  
Input Data ◽  
Fusion Reactor ◽  
Computer Code ◽  
Data Conversion ◽  
Input File ◽  
Cell Geometry ◽  
Cad System ◽  
Aided Design

In a complex and huge system as in ITER fusion reactor, the creation of the geometrical input data of Monte Carlo (MC) codes such as MCNP is a highly exhausting task. Accordingly, it is a general approach to shift the geometric modeling into a computer aided design (CAD) system and to use an interface, which performs the exchange of CAD data into a representation appropriate for MC code. We have developed efficient algorithms and computer code, which are used to convert Parasolid format CAD files including solid and void data into MCNP input data. The CAD-MCNP conversion processes include creating surface equations; determining surface senses; constructing cell geometry and creating MCNP input file. This paper describes the basic algorithms used for the CAD/MCNP interface along with some applications for different geometries.

A Computer-Aided-Design (CAD) System for Four-Step Three-Dimensional Braiding

2015 ◽  
Vol 1120-1121 ◽  
pp. 1429-1434
Author(s):  
Qi Wang ◽  
Jian Ming Wang
Keyword(s):  
Mechanical Properties ◽  
Computer Aided Design ◽  
Geometric Modeling ◽  
Three Dimensional ◽  
Structure Design ◽  
Braided Composite ◽  
Cad System ◽  
Cad Simulation ◽  
Aided Design ◽  
Geometric Study

To estimate the precise mechanical properties of the three-dimensional (3D) braided composite, a geometric study is needed. Owing to the complexity of the yarn paths inside the preform, the geometric modeling for 3D braided composite is always time consuming. In this paper, an efficient method, namely preform boundary reflection (PBR) method, is proposed for motion model construction in geometric study. Furthermore, the CAD simulation system was developed for integral geometric descriptions of 3D braided preform with different parameters. Compared with the traditional method, the novel method significantly simplifies the simulation process without affecting the precision of geometric structure. As a result, the structure design for composite preform is effectively accelerated. The new method establishes the foundation of microstructure and mechanical properties analysis for the preforms with complex geometric structures.

scholarly journals Advances in Engineering Graphics: Improvements and New Proposals

Symmetry ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 827
Author(s):  
José Ignacio Rojas-Sola
Keyword(s):  
Computer Animation ◽  
Computer Aided Design ◽  
Geometric Modeling ◽  
Correct Interpretation ◽  
Special Issue ◽  
Engineering Graphics ◽  
Communication Techniques ◽  
Graphic Communication ◽  
Graphic Language ◽  
Aided Design

The study of graphic communication techniques that engineers, architects, and designers use to express ideas and concepts, or the graphic expression applied to the design process, is becoming increasingly important. The correct interpretation of graphic language allows the development of skills in the training of an engineer or architect. For this reason, research on this topic is especially valuable in finding improvements or new proposals that help toward a better understanding of those techniques. This Special Issue shows the reader some examples of different disciplines available, such as engineering graphics, industrial design, geometric modeling, computer-aided design, descriptive geometry, architectural graphics and computer animation.

A CAD System for Designers’ Decision Making: An Approach With 2D and 3D Integrated and Hierarchical Assembly Models

1991 ◽  
Author(s):  
S. Minami ◽  
T. Ishida ◽  
S. Yamamoto ◽  
K. Tomita ◽  
M. Odamura
Keyword(s):  
Decision Making ◽  
Computer Aided Design ◽  
Mechanical Design ◽  
Prototype System ◽  
Dimensional Model ◽  
3 Dimensional ◽  
Hierarchical Assembly ◽  
Cad System ◽  
Aided Design ◽  
2D And 3D

Abstract A concept for the initial stage of the mechanical design and its implementation in the computer-aided design (CAD) are presented. The process of decision making in design is: (1) determining an outline of the whole assembly using a 2-dimensional model that is easy to operate; (2) checking the outline using a 3-dimensional model in which it is easy to identify the spatial relationships; (3) determining details of its sub-assemblies or their components using the 2-dimensional model; and (4) checking the details using the 3-dimensional model. The CAD system must provide consistent relationships through all the steps. For that, following functions are implemented in our prototype system: (1) a 2D and 3D integrated model for consistency between 2- and 3-dimensional shapes, (2) a hierarchical assembly model with dimensional constraints for consistency within an assembly and their components, and (3) a check on constraints for consistency between shapes and designers’ intentions. As a result, the system can provide an environment well fitted to the designers’ decision making process.

Iterative Part Design With a Virtual Reality Interface

1996 ◽  
Author(s):  
S. N. Trika ◽  
P. Banerjee ◽  
R. L. Kashyap
Keyword(s):  
Virtual Reality ◽  
Computer Aided Design ◽  
Three Dimensions ◽  
Mechanical Parts ◽  
Cad System ◽  
Current State ◽  
Feature Based ◽  
New Feature ◽  
Feature Based Design ◽  
Aided Design

Abstract A virtual reality (VR) interface to a feature-based computer-aided design (CAD) system promises to provide a simple interface to a designer of mechanical parts, because it allows intuitive specification of design features such as holes, slots, and protrusions in three-dimensions. Given the current state of a part design, the designer is free to navigate around the part and in part cavities to specify the next feature. This method of feature specification also provides directives to the process-planner regarding the order in which the features may be manufactured. In iterative feature-based design, the existing part cavities represent constraints as to where the designer is allowed to navigate and place the new feature. The CAD system must be able to recognize the part cavities and enforce these constraints. Furthermore, the CAD system must be able to update its knowledge of part cavities when the new feature is added. In this paper, (i) we show how the CAD system can enforce the aforementioned constraints by exploiting the knowledge of part cavities and their adjacencies, and (ii) present efficient methods for updates of the set of part cavities when the designer adds a new feature.

Design and Implementation of an Intelligent CAD System

1987 ◽  
Author(s):  
M. J. Jakiela ◽  
P. Y. Papalambros
Keyword(s):  
Computer Aided Design ◽  
Design System ◽  
Knowledge Based Systems ◽  
Production Rules ◽  
Automated Assembly ◽  
Cad System ◽  
Design And Implementation ◽  
Knowledge Based ◽  
System Requirements ◽  
Aided Design

Abstract System requirements and system design for integrating a production rule program and a computer aided design system are presented. An implementation using a commercially available graphics modeling system is described. A “suggestive mode” interface is programmed as an example with application to design for automated assembly. Initial use of the implementation indicates that encoding production rules is more difficult than with conventional text-only knowledge-based systems, but that this system is a more effective way to use artificial intelligence techniques in design.

Simultaneous Computer-Aided Design of Rotational Plastic Parts

1993 ◽  
Author(s):  
Colin Chong ◽  
Kiyoshi Sogabe ◽  
Kosuke Ishii
Keyword(s):  
Injection Molding ◽  
Dynamic Characteristics ◽  
Computer Aided Design ◽  
Critical Speed ◽  
Dynamic Balance ◽  
Cad System ◽  
Compatibility Analysis ◽  
Computer Aided ◽  
Plastic Parts ◽  
Aided Design

Abstract This paper addresses the problem of balancing rotational plastic parts during the early stages of design. The study develops an interactive methodology that uses a solid modeling CAD system and considers injection molding concerns simultaneously with static and dynamic balance. The Transfer Matrix Method evaluates the dynamic characteristics by predicting the approximate critical speed of the part. Design Compatibility Analysis (DCA) checks for injection molding guidelines. Using these evaluation modules interactively, designers can develop a functional and manufacturable part quickly.

Geometric Modelling and Computer-Aided Design

2009 ◽  
pp. 1-31
Author(s):  
Xun Xu
Keyword(s):  
Computer Aided Design ◽  
Data Exchange ◽  
Geometric Model ◽  
Point Of View ◽  
Geometric Modelling ◽  
Cad Systems ◽  
Cad System ◽  
Wire Frame ◽  
Computer Aided ◽  
Aided Design

One of the key activities in any product design process is to develop a geometric model of the product from the conceptual ideas, which can then be augmented with further engineering information pertaining to the application area. For example, the geometric model of a design may be developed to include material and manufacturing information that can later be used in computer-aided process planning and manufacturing (CAPP/CAM) activities. A geometric model is also a must for any engineering analysis, such as finite elopement analysis (FEA). In mathematic terms, geometric modelling is concerned with defining geometric objects using computational geometry, which is often, represented through computer software or rather a geometric modelling kernel. Geometry may be defined with the help of a wire-frame model, surface model, or solid model. Geometric modelling has now become an integral part of any computer-aided design (CAD) system. In this chapter, various geometric modelling approaches, such as wire-frame, surface, and solid modelling will be discussed. Basic computational geometric methods for defining simple entities such as curves, surfaces, and solids are given. Concepts of parametric, variational, history-based, and history-free CAD systems are explained. These topics are discussed in this opening chapter because (a) CAD was the very first computer-aided technologies developed and (b) its related techniques and methods have been pervasive in the other related subjects like computer-aided manufacturing. This chapter only discusses CAD systems from the application point of view; CAD data formats and data exchange issues are covered in the second chapter.

scholarly journals Feature-based translation of CAD models with macro-parametric approach: issues of feature mapping, persistent naming, and constraint translation

2020 ◽  
Vol 7 (5) ◽  
pp. 603-614 ◽  
Author(s):  
Mutahar Safdar ◽  
Tahir Abbas Jauhar ◽  
Youngki Kim ◽  
Hanra Lee ◽  
Chiho Noh ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Parametric Approach ◽  
Model Data ◽  
Feature Mapping ◽  
Product Model ◽  
Cad Systems ◽  
Cad System ◽  
Cad Models ◽  
Feature Based ◽  
Aided Design

Abstract Feature-based translation of computer-aided design (CAD) models allows designers to preserve the modeling history as a series of modeling operations. Modeling operations or features contain information that is required to modify CAD models to create different variants. Conventional formats, including the standard for the exchange of product model data or the initial graphics exchange specification, cannot preserve design intent and only geometric models can be exchanged. As a result, it is not possible to modify these models after their exchange. Macro-parametric approach (MPA) is a method for exchanging feature-based CAD models among heterogeneous CAD systems. TransCAD, a CAD system for inter-CAD translation, is based on this approach. Translators based on MPA were implemented and tested for exchange between two commercial CAD systems. The issues found during the test rallies are reported and analyzed in this work. MPA can be further extended to remaining features and constraints for exchange between commercial CAD systems.

An Automated Process Sequence Design and Finite Element Simulation of Axisymmetric Deep Drawn Components

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Ali Fazli ◽  
Behrooz Arezoo ◽  
Mohammad H. Hasanniya
Keyword(s):  
Finite Element ◽  
Computer Aided Design ◽  
Die Design ◽  
Automatic Process ◽  
Blank Holder ◽  
Cad System ◽  
Process Sequence ◽  
Element Simulation ◽  
Process Sequence Design ◽  
Aided Design

A computer-aided design (CAD) system is developed for automatic process design and finite element (FE) modeling of axisymmetric deep drawn components. Using the theoretical and experimental rules, the system initially designs the process sequence of the component. The obtained process sequence is automatically modeled in abaqus software and the system tests whether failure occurs. The failure is supposed to happen when the fracture is predicted in FE simulation. If failure is predicted, the system changes the appropriate process parameters and carries out the simulation process again until all drawing stages are successful. The system returns the requested parameters for die design such as part geometries in middle stages, drawing forces, blank-holder forces, die, and punch profiles radii. The system is successfully tested for some components found in industry and handbooks.

Sign in / Sign up

Export Citation Format

Share Document