Using Improved DSMC Method in Simulating for the Heat and Mass Transfer in Microchannels

2008 ◽  
Author(s):  
J. J. Ye ◽  
J. Yang ◽  
P. Tang ◽  
J. Y. Zheng ◽  
W. Z. Li ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Aspect Ratio ◽  
Heat And Mass Transfer ◽  
Wall Temperature ◽  
Gas Flow ◽  
Mechanical Systems ◽  
Dsmc Method ◽  
Micro Electro Mechanical Systems ◽  
Mass Flowrate

Micro-electro-mechanical systems (MEMS) and nano-electro-mechanical systems (NEMS) have become the focus of a great deal of attention in recent years. The flow and heat behaviors of micro-machines are usually different from that of macro-machines. In this paper, the heat and mass transfer characteristics of rarefied nitrogen gas flows in microchannels have been investigated using improved DSMC method. The influence of aspect ratio and wall temperature on the mass flowrate and wall heat flux in microchannels are studied parametrically. In order to examine the aspect ratio effect on heat and mass transfer, the wall temperature is set constant at 350 K, and the aspect ratio of the microchannel varies from 5 to 20. The results show that as the aspect ratio increases, the velocity of the flow decreases, and the mass flowrate also decreases. In a small aspect ratio channel, the heat transfer occurs throughout the microchannel, and as the aspect ratio of the microchannel increases, the region of thermal equilibrium becomes larger. To investigate the effects of wall temperature on heat and mass transfer, the aspect ratio of the microchannel is held constant at 10 and the wall temperature is changed from 300 K to 800 K. The results show that, when the wall temperature increases, the pressure increases slightly and the number density drops rapidly near the inlet. In addition, the Knudsen number increases as the wall temperature increases. It indicates that the increasing wall temperature of microchannel enhances the rarefaction of the gas flow. Moreover, as the wall temperature increases, the mass flowrate decreases, and the temperature will increase more rapidly near the inlet, with more heat transfer between the gas flow and the wall.

Using Direct Simulation Monte Carlo With Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
J. Yang ◽  
J. J. Ye ◽  
J. Y. Zheng ◽  
I. Wong ◽  
C. K. Lam ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat Flux ◽  
Aspect Ratio ◽  
Heat And Mass Transfer ◽  
Wall Temperature ◽  
Gas Flow ◽  
Wall Heat Flux ◽  
Entrance Region ◽  
Mass Flowrate

Micro-electromechanical systems and nano-electromechanical systems have attracted a great deal of attention in recent years. The flow and heat transfer behaviors of micromachines for separation applications are usually different from that of macro counterparts. In this paper, heat and mass transfer characteristics of rarefied nitrogen gas flows in microchannels are investigated using direct simulation Monte Carlo with improved pressure boundary conditions. The influence of aspect ratio and wall temperature on mass flowrate and wall heat flux in microchannels are studied parametrically. In order to examine the aspect ratio effect on heat and mass transfer behaviors, the wall temperature is set constant at 350 K and the aspect ratio of the microchannel varies from 5 to 20. The results show that as the aspect ratio increases, the velocity of the flow decreases, so does the mass flowrate. In a small aspect ratio channel, the heat transfer occurs throughout the microchannel; as the aspect ratio of the microchannel increases, the region of thermal equilibrium extends. To investigate the effects of wall temperature (Tw) on the mass flowrate and wall heat flux in a microchannel, the temperature of the incoming gas flow (Tin) is set constant at 300 K and the wall temperature varies from 200 K to 800 K while the aspect ratio is remained unchanged. Results show that majority of the wall heat flux stays within the channel entrance region and drops to nearly zero at the halfway in the channel. When Tw<Tin, under the restriction of pressure-driven condition and continuity of pressure, the molecular number density of the flow decreases along the flow direction after a short increase at the entrance region. When Tw>Tin, the molecular number density of the flow drops rapidly near the inlet and the temperature of the gas flow increases along the channel. As Tw increases, the flow becomes more rarefied, the mass flowrate decreases, and the resistance at the entrance region increases. Furthermore, when Tw>Tin, a sudden jump of heat transfer flux and temperature are observed at the exit region of the channel.

Natural Convection Heat and Mass Transfer in the Vertical Cylindrical Porous Channel Under the Effects of Time-Periodic Boundary Condition

2019 ◽  
Vol 141 (12) ◽  
Author(s):  
Hayder I. Mohammed ◽  
Donald Giddings
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Boundary Condition ◽  
Porous Medium ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Heat And Mass Transfer ◽  
Vertical Wall

Abstract Heat and mass transfer are investigated numerically with steady-state laminar natural convection through a vertical cylindrical enclosure filled with a liquid-saturated porous medium. The vertical wall is under a constant magnetic field and various durations of periodic heating boundary condition; the top and bottom surfaces are kept at a constant cold temperature. Continuity, momentum, and energy equations are transformed to dimensionless equations. The finite difference approach with the line successive over-relaxation (LSOR) method is used to obtain the computational results. This study covers the heat transfer, the temperature distribution, and the velocity field in the domain under the variation of different parameters. The code used is validated by modifying it to analyze the Nusselt number in the existing experimental literature of Izadpanah et al. (1998, “Experimental and Theoretical Studies of Convective Heat Transfer in a Cylindrical Porous Medium,” Int. J. Heat Fluid Flow, 19(6), pp. 629–635). This work shows that Nusselt number decreases (with varying gradient) as the aspect ratio increases, and that it increases as the Rayleigh number increases. The centerline temperature has a proportional relationship with the heating amplitude and the heating period (as the system receives more heat) and is inversely proportional with Rayleigh number. Increasing the Rayleigh number causes increased convective velocity, which affects the position of the hot region, and causes a decrease in the temperature field. Increasing the aspect ratio results in a warm stream at the center of the cylinder, and when the time period of the heating increases, the circulation becomes faster and the intensity of the temperature contour layers decreases. In this work, a correlation for Nu as a function of the mentioned parameters is developed.

scholarly journals Impact of Binary Chemical Reaction and Activation Energy on Heat and Mass Transfer of Marangoni Driven Boundary Layer Flow of a Non-Newtonian Nanofluid

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 702
Author(s):  
Ramanahalli Jayadevamurthy Punith Gowda ◽  
Rangaswamy Naveen Kumar ◽  
Anigere Marikempaiah Jyothi ◽  
Ballajja Chandrappa Prasannakumara ◽  
Ioannis E. Sarris
Keyword(s):  
Heat Transfer ◽  
Activation Energy ◽  
Boundary Layer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Velocity Gradient ◽  
Boundary Layer Flow ◽  
Biological Fluids ◽  
Porosity Parameter ◽  
Layer Flow

The flow and heat transfer of non-Newtonian nanofluids has an extensive range of applications in oceanography, the cooling of metallic plates, melt-spinning, the movement of biological fluids, heat exchangers technology, coating and suspensions. In view of these applications, we studied the steady Marangoni driven boundary layer flow, heat and mass transfer characteristics of a nanofluid. A non-Newtonian second-grade liquid model is used to deliberate the effect of activation energy on the chemically reactive non-Newtonian nanofluid. By applying suitable similarity transformations, the system of governing equations is transformed into a set of ordinary differential equations. These reduced equations are tackled numerically using the Runge–Kutta–Fehlberg fourth-fifth order (RKF-45) method. The velocity, concentration, thermal fields and rate of heat transfer are explored for the embedded non-dimensional parameters graphically. Our results revealed that the escalating values of the Marangoni number improve the velocity gradient and reduce the heat transfer. As the values of the porosity parameter increase, the velocity gradient is reduced and the heat transfer is improved. Finally, the Nusselt number is found to decline as the porosity parameter increases.

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yao Li ◽  
Haiqing Si ◽  
Jingxuan Qiu ◽  
Yingying Shen ◽  
Peihong Zhang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat Exchanger ◽  
Heat And Mass Transfer ◽  
Field Performance ◽  
High Specific Surface Area ◽  
Calculation Model ◽  
Air Separation ◽  
Transfer Efficiency ◽  
Heat Transfer Efficiency

Abstract The plate-fin heat exchanger has been widely applied in the field of air separation and aerospace due to its high specific surface area of heat transfer. However, the low heat transfer efficiency of its plate bundles has also attracted more attention. It is of great significance to optimize the structure of plate-fin heat exchanger to improve its heat transfer efficiency. The plate bundle was studied by combining numerical simulation with experiment. Firstly, according to the heat and mass transfer theory, the plate bundle calculation model of plate-fin heat exchanger was established, and the accuracy of the UDF (User-Defined Functions) for describing the mass and heat transfer was verified. Then, the influences of fin structure parameters on the heat and mass transfer characteristics of channel were discussed, including the height, spacing, thickness and length of fins. Finally the influence of various factors on the flow field performance under different flow states was integrated to complete the optimal design of the plate bundle.

An Overview: Analysis of Heat and Mass Transfer in Fractal Media by Fractal Geometry and Technique

2010 ◽  
Author(s):  
Boming Yu
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Porous Media ◽  
Heat And Mass Transfer ◽  
Oil Recovery ◽  
Fractal Geometry ◽  
Boiling Heat Transfer ◽  
Nucleate Boiling ◽  
Fractal Media ◽  
Nucleate Boiling Heat Transfer

In the past three decades, fractal geometry and technique have received considerable attention due to its wide applications in sciences and technologies such as in physics, mathematics, geophysics, oil recovery, material science and engineering, flow and heat and mass transfer in porous media etc. The fractal geometry and technique may become particularly powerful when they are applied to deal with random and disordered media such as porous media, nanofluids, nucleate boiling heat transfer. In this paper, a summary of recent advances is presented in the areas of heat and mass transfer in fractal media by fractal geometry technique. The present overview includes a brief summary of the fractal geometry technique applied in the areas of heat and mass transfer; thermal conductivities of porous media and nanofluids; nucleate boiling heat transfer. A few comments are made with respect to the theoretical studies that should be made in the future.

Heat Transfer on Nanofluid Flow With Homogeneous–Heterogeneous Reactions and Internal Heat Generation

2014 ◽  
Vol 136 (12) ◽  
Author(s):  
Raj Nandkeolyar ◽  
Peri K. Kameswaran ◽  
Sachin Shaw ◽  
Precious Sibanda
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Heat Generation ◽  
Internal Heat ◽  
Internal Heat Generation ◽  
Heterogeneous Reactions ◽  
Transfer Coefficients ◽  
Transfer Characteristics ◽  
Fluid Properties

We investigated heat and mass transfer on water based nanofluid due to the combined effects of homogeneous–heterogeneous reactions, an external magnetic field and internal heat generation. The flow is generated by the movement of a linearly stretched surface, and the nanofluid contains nanoparticles of copper and gold. Exact solutions of the transformed model equations were obtained in terms of hypergeometric functions. To gain more insights regarding subtle impact of fluid and material parameters on the heat and mass transfer characteristics, and the fluid properties, the equations were further solved numerically using the matlab bvp4c solver. The similarities and differences in the behavior, including the heat and mass transfer characteristics, of the copper–water and gold–water nanofluids with respect to changes in the flow parameters were investigated. Finally, we obtained the numerical values of the skin friction and heat transfer coefficients.

Sign in / Sign up

Export Citation Format

Share Document