Fully Coupled Aero-Hydro-Structural Simulation of New Floating Wind Turbine Concept

2018 ◽  
Author(s):  
Aengus Connolly ◽  
Marc Guyot ◽  
Marc Le Boulluec ◽  
Léna Héry ◽  
Aonghus O’Connor
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Structural Model ◽  
Capital Expenditure ◽  
Offshore Wind ◽  
Floating Platform ◽  
Simulation Methodology ◽  
Floating Wind Turbine ◽  
Floating Offshore Wind Turbines ◽  
Fully Coupled

This paper describes a fully coupled numerical simulation methodology which is tailored towards floating offshore wind turbines. The technique assembles three key components; an aerodynamic model of the applied wind loads based on blade element momentum theory, a structural model of the floating platform and its associated mooring lines based on the nonlinear finite element method, and a hydrodynamic model of the wave-induced forces based on potential flow theory. The simulation methodology has been implemented in a commercial software product called ‘Flexcom Wind’, and the technical validation involves comparisons with experimental data derived from model-scale tank test facilities. The validation process centres on an innovative floating wind turbine concept developed by Eolink. Unlike most wind turbines in industry which are supported by a single mast, this patented design uses four separate pillars to connect the turbine structure to the corners of the floating platform. This unique configuration offers several advantages over conventional designs, including a more even stress distribution in structural members, reduced dynamic vibration, smaller floater size and lower overall capital expenditure. Data obtained from the numerical simulations combined with the empirical tests is helping to optimise the device, with a view to further improving its structural design and performance.

Guideline for Offshore Floating Wind Turbine Structures

2010 ◽  
Author(s):  
Knut O. Ronold ◽  
Vigleik L. Hansen ◽  
Marte Godvik ◽  
Einar Landet ◽  
Erik R. Jo̸rgensen ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farms ◽  
Oil And Gas Industry ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Technical Requirements ◽  
Floating Wind Turbine ◽  
Floating Offshore Wind Turbines ◽  
Offshore Floating Wind Turbine

Floating offshore wind turbines is a field undergoing major development. Several companies and research institutes worldwide are engaged in research programs, pilot projects and even planning of commercial floating wind farms. Developing standards for design of floating wind turbine structures and a framework for prevailing rules are crucial and necessary for the industry to continue to grow. Det Norske Veritas (DNV) is an international provider of offshore standards for both the oil and gas industry and the wind energy industry. The standard DNV-OS-J101 “Design of Offshore Wind Turbine Structures” provides principles, technical requirements and guidance for design, construction and in-service inspection of offshore wind turbine structures. As a first step towards updating this standard to fully cover floating wind turbine structures, a DNV Guideline for Offshore Floating Wind Turbines has been established. This development is based on identification of current floating wind turbine concepts and the guideline includes an evaluation of what is required to make DNV-OS-J101 suitable for floating wind turbine structures. This paper presents the highlights of the new DNV Guideline for Offshore Floating Wind Turbine Structures.

Coupling of Two Tools for the Simulation of Floating Wind Turbines

2013 ◽  
Author(s):  
Sébastien Gueydon ◽  
Koert Lindenburg ◽  
Feike Savenije
Keyword(s):  
Computer Program ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Time Domain ◽  
Domain Model ◽  
Offshore Wind ◽  
Floating Body ◽  
Research Centre ◽  
Floating Wind Turbine ◽  
Floating Offshore Wind Turbines

For the design of a floating wind turbine it is necessary to take the loading due to the wind, wave and current in equal consideration. The PHATAS computer program from ECN (Energy research Centre of the Netherlands) is a time-domain aero-elastic simulation program, that accounts for the complete mutual interaction of unsteady rotor aerodynamics, structural dynamics of the rotor blades and tower, and interaction with the turbine controller under influence of turbulent wind and wave loading for fixed wind turbines. The aNySIM computer program from MARIN is a multi rigid body time domain model that accounts for wave loadings, current loadings, wind loadings, floating body dynamics, mooring dynamics. The coupled computer program aNySIM / PHATAS accounts for all loadings acting on a floating wind turbine and its response whereas PHATAS can only be used for fixed wind turbines onshore and offshore. This paper reports on the dynamic coupling between PHATAS and aNySIM. As a typical case study, the controller for floating offshore wind turbines is evaluated. This new tool has been used to repeat phase IV of the Offshore Code Comparison Collaboration (OC3) within IEA Wind Task 23, regarding floating wind turbine modelling. The results of these simulations are presented in this paper.

scholarly journals A Fully Coupled Computational Fluid Dynamics Method for Analysis of Semi-Submersible Floating Offshore Wind Turbines Under Wind-Wave Excitation Conditions Based on OC5 Data

2018 ◽  
Vol 8 (11) ◽  
pp. 2314 ◽  
Author(s):  
Yin Zhang ◽  
Bumsuk Kim
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Wave ◽  
Offshore Wind ◽  
Wave Excitation ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Fully Coupled

Accurate prediction of the time-dependent system dynamic responses of floating offshore wind turbines (FOWTs) under aero-hydro-coupled conditions is a challenge. This paper presents a numerical modeling tool using commercial computational fluid dynamics software, STAR-CCM+(V12.02.010), to perform a fully coupled dynamic analysis of the DeepCwind semi-submersible floating platform with the National Renewable Engineering Lab (NREL) 5-MW baseline wind turbine model under combined wind–wave excitation environment conditions. Free-decay tests for rigid-body degrees of freedom (DOF) in still water and hydrodynamic tests for a regular wave are performed to validate the numerical model by inputting gross system parameters supported in the Offshore Code Comparison, Collaboration, Continued, with Correlations (OC5) project. A full-configuration FOWT simulation, with the simultaneous motion of the rotating blade due to 6-DOF platform dynamics, was performed. A relatively heavy load on the hub and blade was observed for the FOWT compared with the onshore wind turbine, leading to a 7.8% increase in the thrust curve; a 10% decrease in the power curve was also observed for the floating-type turbines, which could be attributed to the smaller project area and relative wind speed required for the rotor to receive wind power when the platform pitches. Finally, the tower-blade interference effects, blade-tip vortices, turbulent wakes, and shedding vortices in the fluid domain with relatively complex unsteady flow conditions were observed and investigated in detail.

scholarly journals Comparing the Effect of Rotor Tilt Angle on Performance of Floating Offshore and Fixed Tower Wind Turbines

2019 ◽  
Vol 12 (5) ◽  
pp. 84
Author(s):  
Wongsakorn Wisatesajja ◽  
Wirachai Roynarin ◽  
Decha Intholo
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Tilt Angle ◽  
Turbine Blades ◽  
Angle Of Attack ◽  
Offshore Wind ◽  
Floating Platform ◽  
Optimal Position ◽  
Wind Speeds ◽  
Floating Offshore Wind Turbines

The development of Floating Offshore Wind Turbines (FOWTs) aims to improve the potential performance of the wind turbine. However, a problem arises due to the angle of tilt from the wind flow and the floating platform, which leads to a vertical misalignment of the turbine axis, thereby reducing the available blade area and lowering the capacity to capture energy. To address this problem, this paper seeks to compare the influence of the rotor tilt angle on wind turbine performance between fixed tower wind turbines and FOWTs. The models used in the experiments have R1235 airfoil blades of diameter 84 cm. The experiment was analyzed using a wind tunnel and mathematical modelling techniques. Measurements were obtained using an angle meter, anemometer and tachometer. Testing involved wind speeds ranging from 2 m/s to 5.5 m/s, and the rotational speeds of the two turbine designs were compared. The study found that the rotational speeds of the FOWTs were lower than those of the fixed tower turbines. Moreover, at tilt angles from 3.5° – 6.1° there was a loss in performance which varied between 22% and 32% at different wind speeds. The tilt angle had a significant effect upon FOWTs due to the angle of attack was continuously changing, thus altering the optimal position of the turbine blades. This changing angle of attack caused the effective area of the rotor blade to change, leading to a reduction in power output at suboptimal angles. The study finally makes recommendations for future studies.

Model-Inversion Feedforward Control for Wave Load Reduction in Floating Wind Turbines

2021 ◽  
Author(s):  
Alessandro Fontanella ◽  
Marco Belloli
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Control Strategy ◽  
Feedforward Control ◽  
Operating Conditions ◽  
Offshore Wind ◽  
Linear Wave ◽  
Wave Load ◽  
Floating Wind Turbine ◽  
Floating Offshore Wind Turbines

Abstract This paper develops a novel feedforward control strategy for reducing structural loads caused by waves in floating offshore wind turbines. The proposed control strategy is based on the inversion of a linear model of the floating wind turbine, and a real-time forecast of the wave obtained from an upstream measurement is utilized to compute a collective pitch control action. Two feedforward controllers are considered: one is designed to cancel the rotor speed oscillations and one to lower the towertop fore-aft shear force. The feedforward control strategies are implemented in a 10MW floating wind turbine, complementing the standard feedback controller for generator speed regulation. Numerical simulations are carried out in FAST, in four operating conditions with realistic wind and waves, proving the proposed feedforward controller effectively mitigates the structural loads caused by waves. In detail, the feedforward action reduces the loads spectra in the frequency range where linear wave is active. The best performance is realized higher winds (the FA force is reduced up to 25% in 22 m/s wind), where the wave excitation is the strongest.

scholarly journals A 6-DOFs Hardware-in-the-Loop System for Wind Tunnel Tests of Floating Offshore Wind Turbines

2019 ◽  
Author(s):  
Alessandro Fontanella ◽  
Ilmas Bayati ◽  
Federico Taruffi ◽  
Francesco La Mura ◽  
Alan Facchinetti ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Scale Model ◽  
Hardware In The Loop ◽  
Floating Platform ◽  
Wind Tunnel Tests ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines

Abstract This article presents a hardware-in-the-loop (HIL) methodology developed at Politecnico di Milano (PoliMi) to perform wind tunnel tests on floating offshore wind turbines (FOWTs). The 6-DOFs HIL setup is presented, focusing on the main differences with respect to a previous 2-DOFs system. Aerodynamic, rotor and control related loads, physically reproduced by the wind turbine scale model, must be measured in real-time and integrated with the platform numerical model. These forces contribute to couple wind turbine and floating platform dynamics and their correct reproduction is of fundamental importance for the correct simulation of the floating system behavior. The procedure developed to extract rotor loads from the available measurements is presented, discussing its limitations and the possible uncertainties introduced in the results. Results from verification tests in no-wind conditions are presented and analyzed to identify the main uncertainty sources and quantify their effect on the reproduction of the floating wind turbine response to combined wind and waves.

Model Experiments on the Motion of a SPAR Type Floating Wind Turbine in Wind and Waves

2011 ◽  
Author(s):  
Toshiki Chujo ◽  
Shigesuke Ishida ◽  
Yoshimasa Minami ◽  
Tadashi Nimura ◽  
Shunji Inoue
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Floating Structure ◽  
Floating Structures ◽  
Water Basin ◽  
Offshore Wind Turbines ◽  
Floating Wind Turbine ◽  
Floating Offshore Wind Turbines

The study of floating offshore wind turbines has recently been attractive to many research groups in the renewable energy. Because the area of shallow water along Japanese coast is limited, the development of floating base for wind turbine is inevitable for making large scale wind farms. There are some problems to be solved for floating offshore wind turbines. Besides the mechanical problems of turbines, the influence of the motion of the floater in wind and waves to the electric generation properties, the safeties of floating structures such as the fatigue of machines and structures or criteria of electric facilities should be studied. Several types of floating structures have been proposed such as SPAR, TLP, pontoon, and semi submersibles. The authors have focused on SPAR type because its simpler shape seems to have economical advantages. In this paper, the authors performed experiments in a wind tunnel and a water basin from the viewpoint of “wind turbines on a SPAR type floating structure”. Firstly, forced pitching experiments were operated in a wind tunnel, and the difference in two types of wind turbines, upwind type and downwind type, is discussed. The former type is very popular and the latter type is thought to be suitable for floating structure. Secondly, experiments which thought to be more relevant for a floating wind turbine were carried out in a water basin. The relationship between the location of the attachment point of mooring lines and the motion of the SPAR in waves, and the influence of pitching angle of turbine blades to the motion of the SPAR in waves were inspected. In these experiments it was used a mechanism to control the pitch angle of the blades of the scale model of wind turbine.

Importance of Control Strategies on Fatigue Life of Floating Wind Turbines

2007 ◽  
Author(s):  
Bjo̸rn Skaare ◽  
Tor David Hanson ◽  
Finn Gunnar Nielsen
Keyword(s):  
Fatigue Life ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Control Strategy ◽  
Control Strategies ◽  
Offshore Wind ◽  
Offshore Wind Turbines ◽  
Pitch Control ◽  
Floating Wind Turbine ◽  
Floating Offshore Wind Turbines

Exploitation of wind energy at deep-waters locations requires floating wind turbine foundations. Several floating wind turbine foundation concepts are reported in the literature, and a common challenge is to make a low cost foundation with acceptable motion characteristics. In order to analyze the fatigue life of floating offshore wind turbines, the coupled action of wind, waves, current and blade pitch control strategy must be considered. State-of-the-art computer programs for motion analysis of moored offshore bodies, Simo-Riflex from Sintef Marintek, are coupled to a state-of-the-art aero-elastic computer program for wind turbines, Hawc2 from Riso̸ National Laboratory. The wave loads on the body may include wave diffraction and radiation loads as well as viscous forces. The mooring lines are modelled using cable finite elements with inertia and drag forces. The wind load on the rotor is based on common rotor aerodynamics including corrections for skew inflow and relative motion caused by large displacement and large tilt and yaw rotations of the rotor. Conventional wind turbine control strategies lead to wind-induced loads that may amplify or damp the motions of the floating wind turbine. The first case is a result of the blade pitch control strategy above rated wind speed for the wind turbine, and can result in large resonant motions that will reduce the fatigue life of the floating wind turbine significantly. The latter case implies energy extraction from the waves. This paper addresses the importance of control strategies on fatigue life for a given floating offshore wind turbine. A fatigue life time comparison between a conventional blade pitch control strategy and an estimator based blade pitch control strategy show that the fatigue life of floating offshore wind turbines can be significantly increased by use of alternative blade pitch control strategies.

Fully-Coupled Aero-Hydrodynamic Simulation of Floating Offshore Wind Turbines by Different Simulation Methods

2018 ◽  
Author(s):  
Ping Cheng ◽  
Decheng Wan
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Floating Platform ◽  
Hydrodynamic Simulation ◽  
Floating Offshore Wind Turbine ◽  
Floating Offshore Wind Turbines ◽  
Fully Coupled

To accurately predict the critical loads due to wind and wave is one of the common challenges in designing a floating offshore wind turbine (FOWT). The fully-coupled aero-hydrodynamic simulation of a floating offshore wind turbine, the NREL-5MW baseline wind turbine mounted on a semi-submersible floating platform, is conducted with two methods. Firstly, the in-house code naoe-FOAM-os-SJTU, which is developed on the open source platform OpenFOAM and coupled with the overset grid technique, is employed for the directly CFD computations. And another in-house code FOWT-UALM-SJTU developed by coupling the unsteady actuator line model (UALM) with naoe-FOAM-SJTU is also utilized for coupling simulations. In both models, the three-dimensional Reynolds Averaged Navier-Stokes (RANS) equations are solved with the turbulence model k-ω SST, and the Pressure-Implicit with Splitting of Operations (PISO) algorithm is applied to solve the pressure-velocity coupling equations. Both two solvers provide reasonable results of main aerodynamic loads as well as the main hydrodynamic forces. The FOWT-UALM-SJTU solver achieves better computational efficiency by simplifying the blade structure as actuator line models, while the naoe-FOAM-os-SJTU solver provides more accurate detailed flow information near the turbine blades.

scholarly journals Impact of Typhoons on Floating Offshore Wind Turbines: A Case Study of Typhoon Mangkhut

2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Jiawen Li ◽  
Jingyu Bian ◽  
Yuxiang Ma ◽  
Yichen Jiang
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Safety Evaluation ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Motion Response ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Coupling Motion

A typhoon is a restrictive factor in the development of floating wind power in China. However, the influences of multistage typhoon wind and waves on offshore wind turbines have not yet been studied. Based on Typhoon Mangkhut, in this study, the characteristics of the motion response and structural loads of an offshore wind turbine are investigated during the travel process. For this purpose, a framework is established and verified for investigating the typhoon-induced effects of offshore wind turbines, including a multistage typhoon wave field and a coupled dynamic model of offshore wind turbines. On this basis, the motion response and structural loads of different stages are calculated and analyzed systematically. The results show that the maximum response does not exactly correspond to the maximum wave or wind stage. Considering only the maximum wave height or wind speed may underestimate the motion response during the traveling process of the typhoon, which has problems in guiding the anti-typhoon design of offshore wind turbines. In addition, the coupling motion between the floating foundation and turbine should be considered in the safety evaluation of the floating offshore wind turbine under typhoon conditions.

Sign in / Sign up

Export Citation Format

Share Document