Experimental Performance of a Nanofluid Pulsating Heat Pipe

2008 ◽  
Author(s):  
Wei Qu ◽  
Chong Qu ◽  
Jianchao Feng
Keyword(s):  
Heat Transfer ◽  
Thermal Resistance ◽  
Heat Pipe ◽  
Operating Temperature ◽  
Nano Particles ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Operation Temperature ◽  
Heating Section ◽  
Inclination Angles

The startup and operating performances of a nanofluid pulsating heat pipe are experimented. When the working fluid is selected as nanofluid instead of the base working fluid, the pulsating heat pipe can work at lower heating loads and start up more quickly and the thermal resistance between the heating section and the cooling section significantly decreases. For the nanofluid and base working fluid, the operating temperature increases with the heating load, the thermal resistance of pulsating heat pipe decreases with the operating temperature. The inclination angles of pulsating heat pipe as 30°, 60°, or 90°, have little effects on heat transfer performance. Under a vertical bottom heating mode of 100 watts and at the operation temperature of 110 °C, the thermal resistance of TiO2/H2O nanofluid pulsating heat pipe can be 0.11 °C/W, while it is 0.23 °C/W for the base working fluid. The mechanisms that the nanofluid pulsating heat pipe has better performance are tentatively explained as, the nano particles can form many micro nuclear centers for the boiling, and can lead to several heat transfer enhancement.

Experimental Investigation of Heat Transfer of Refrigerant Fluid Pulsating Heat Pipe

2017 ◽  
Vol 865 ◽  
pp. 137-142
Author(s):  
Somchai Maneewan ◽  
Chantana Punlek ◽  
Hoy Yen Chan ◽  
Atthakorn Thongtha
Keyword(s):  
Heat Transfer ◽  
Thermal Resistance ◽  
Heat Pipe ◽  
Temperature Difference ◽  
Heat Input ◽  
Filling Ratio ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Filling Volume ◽  
Volume Filling

Heat transfer performances of a pulsating heat pipe (PHP) having internal and external diameter with 4.5 mm and 6 mm with various contents of refrigerant are experimentally investigated. The working fluid as R404A refrigerant was filled in the volume ratios from 0% to 80% and the heat input was controlled in the range from 10 W to 80 W. Obtained results exhibited the ability of R404A refrigerant can enhance the thermal performance in steady state condition. The average temperature difference of the evaporating section and condensing section in the 80% filling volume ratio decreased from 9.5 °C to 2.5 °C when the heating power increase from 10 W to 80 W. The thermal resistance of evaporator and condenser decreased with an increase of the heat input as well. For other filling volume ratios, the trend of temperature difference and thermal resistance was similar to that of the 80% volume filling ratio. Considering the same heat input, the highest heat transfer performance was found at the 80% volume filling ratio. Refrigerant with a relatively low dynamic consistency can lead to relatively high velocity in the PHP that can reduce the temperature difference between the evaporating section and condensing section.

The Start-Up Performance of Pulsating Heat Pipe With Communicating Pipe at Different Inclination Angles

2019 ◽  
Author(s):  
Fu-Min Shang ◽  
Shi-Long Fan ◽  
Jian-Hong Liu
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Heat Pipe ◽  
Heat Transfer Performance ◽  
Working Fluid ◽  
Transfer Performance ◽  
Pulsating Heat Pipe ◽  
High Heat Transfer ◽  
Start Up ◽  
Inclination Angles

Abstract The pulsating heat pipe (PHP) is a passive cooling device, which has the advantages of simple structure, high heat transfer performance and low production cost. The complex vapor-liquid phase change occurs in the in the initial stage of PHP. In this work, we explore the start-up performance of PHP at different inclination angles and the experiment shows that start-up performance is respectively different when the angles are 0°, 45°, 90°, 135° and 180°. Since the gravitational auxiliary function, the working fluid in the communicating pipe which takes longer time to vaporize change phase earlier than that in PHP’s loop when the angles are 0° and 45°. Nevertheless, when the angle is 90°, the phase change of working fluid in communicating pipe and in the loop occurs at the same time. Meanwhile, the oscillating mode affects the stability of the starting and heat transfer performance of the PHP.

Experimental Investigation and Performance Evaluation of a Multi Turn Closed Loop Pulsating Heat Pipe

2014 ◽  
Vol 592-594 ◽  
pp. 1554-1558 ◽  
Author(s):  
N. Narendra Babu ◽  
Rudra Naik
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Closed Loop ◽  
Experimental Result ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Working Fluids

Pulsating heat pipe (PHP) is a passive heat transfer device, which transfers heat from one region to another with exceptional heat transfer capacity. It utilizes the latent heat of vaporization of the working fluid as well as the sensible heat. As a result, the effective thermal conductivity is higher than that of the conductors. An experimental study on three turn closed loop pulsating heat pipe with three different working fluids viz., Acetone, Methanol, Heptane and distilled water were employed. The PHP is made up of brass material with an inner diameter of 1.95mm, with a total length of 1150 mm for different fill ratios (FR) was employed .The PHP is tested for the thermal resistance and the heat transfer coefficient. The experimental result strongly demonstrates that acetone is a better working fluid among the working fluids considered in terms of higher heat transfer coefficient and lower thermal resistance.

Experimental Investigation of Closed Loop Pulsating Heat Pipe With Nanofluids

2009 ◽  
Author(s):  
Hamed Jamshidi ◽  
Sajad Arabnejad ◽  
Mohammad Behshad Shafii ◽  
Yadollah Saboohi ◽  
Ramin Rasoulian
Keyword(s):  
Thermal Resistance ◽  
Heat Pipe ◽  
Closed Loop ◽  
Filling Ratio ◽  
Nano Particles ◽  
Working Fluid ◽  
Sudden Increase ◽  
Pulsating Heat Pipe ◽  
Optimum Performance ◽  
The Impact

In this paper, the effect of several different parameters on the thermal resistance of a Closed Loop Pulsating Heat Pipe (CLPHP) has been investigated. These parameters include the working fluid, the inclination angle, the filling ratio and the heat influx. Also, the impact of using nanofluids with different nano-particle concentrations has been analyzed. It was observed that a CLPHP can increase the heat transfer up to 11.5 times compared to an empty pipe. Optimum performance for a system with the water-silver nanofluid was achieved at conditions of 50% filling ratio and 0.9 K/W of thermal resistance, and for the water-titanium oxide system, these optimal conditions were found to be 40% filling ratio and 0.8 K/W of thermal resistance. In addition, the optimum performance for pure water occurs at a filling ratio of 40% and a thermal resistance of 1.15 K/W. The nanofluid reduces the thermal resistance by 30%. With a decrease in the concentration of nano-particles in the base fluid, the performance of the system decreases as well and the total thermal resistance increases. In low powers (under 20 W), the two-phase flow pattern inside the pipes was slug-plug, but in higher powers (over 30 W), this changed to an annular flow. The performance of the system was better in the annular mode, but there was a probability of dry out and sudden increase of condenser temperature.

Experimental Investigation on Performance of Pulsating Heat Pipe

2015 ◽  
Author(s):  
Tarigonda Hari Prasad ◽  
Pol Reddy Kukutla ◽  
P. Mallikarjuna Rao ◽  
R. Meenakshi Reddy
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Heat Pipes ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
The Given ◽  
Liquid Vapor

Pulsating heat pipes (PHP) receives heat from the working fluid distributes itself naturally in the form of liquid–vapor system, i.e., receiving heat from one end and transferring it to other end by a pulsating action of the liquid–vapor system. Pulsating heat pipes have more advantages than other heat pipes. The problem identified is, to calculate the performance of the pulsating heat pipes with respect to different inclinations using various parameters. In this paper, experiment on performance of closed single loop pulsating heat pipe (CLPHP) using water as a working fluid is considered. The parameters such as thermal resistance (Rth), heat transfer coefficient (h), and variation of temperature with respect to time for the given input at different inclinations such as 0°, 45°, and 90° are taken for the present work. Water is used as the working fluid and is subjected to 50% filling ratio and vacuumed at a pressure of 2300Pa. The performance is calculated at different inclinations of the CLPHP with single turn/loop. The factors such as heat transfer coefficient, thermal resistance, time taken for heating the pulsating heat pipe with the given input are calculated. Finally, it has been concluded that is preferable orientation for PHP and it was found be at vertical orientation i.e., at 90° inclination, because more pulsating action is taken place at this inclination and henceforth, heat transfer rate is faster at this inclination.

scholarly journals Integration of a Pulsating Heat Pipe in a Flat Plate Heat Sink

2014 ◽  
Author(s):  
Mitchell P. Hoesing ◽  
Gregory J. Michna
Keyword(s):  
Thermal Resistance ◽  
Flat Plate ◽  
Heat Pipe ◽  
Heat Sink ◽  
New Technologies ◽  
Operating Conditions ◽  
Working Fluid ◽  
High Heat Flux ◽  
Pulsating Heat Pipe ◽  
Plate Heat

The ongoing development of faster and smaller electronic components has led to a need for new technologies to effectively dissipate waste thermal energy. The pulsating heat pipe (PHP) shows potential to meet this need, due to its high heat flux capacity, simplicity, and low cost. A 20-turn flat plate PHP was integrated into an aluminum flat plate heat sink with a simulated electronic load. The PHP heat sink used water as the working fluid and had 20 parallel channels with dimensions 2 mm × 2 mm × 119 mm. Experiments were run under various operating conditions, and thermal resistance of the PHP was calculated. The performance enhancement provided by the PHP was assessed by comparing the thermal resistance of the heat sink with no working fluid to that of it charged with water. Uncharged, the PHP was found to have a resistance of 1.97 K/W. Charged to a fill ratio of approximately 75% and oriented vertically, the PHP achieved a resistance of .49 K/W and .53 K/W when the condenser temperature was set to 20°C and 30°C, respectively. When the PHP was tilted to 45° above horizontal the PHP had a resistance of .76 K/W and .59 K/W when the condenser was set 20°C and 30°C, respectively. The PHP greatly improves the heat transfer properties of the heat sink compared to the aluminum plate alone. Additional considerations regarding flat plate PHP design are also presented.

scholarly journals Experiment Study on Improved Closed Loop Pulsating Heat Pipe with Silver/Water Nanofluid

2013 ◽  
Vol 732-733 ◽  
pp. 462-466
Author(s):  
Wei Xiu Shi ◽  
Wei Yi Li ◽  
Li Sheng Pan
Keyword(s):  
Heat Transfer ◽  
Thermal Resistance ◽  
Heat Pipe ◽  
Closed Loop ◽  
Filling Ratio ◽  
Pulsating Heat Pipe ◽  
Start Up ◽  
High Heating ◽  
Operation Stability ◽  
Heat Transfer Limit

Start up and heat transfer performances of improved closed loop pulsating heat pipe (ICLPHP) charged with water and silver/water nanofluid, respectively, were investigated experimentally with angles of 90° and 60°. Both the average evaporator wall temperature and the overall thermal resistance of the ICLPHP with different working fluids and at the volume filling ratio of 35% were tested and compared. Experimental results showed that nanofluid caused different thermal performances of ICLPHP. Within the experiment range, silver/water nanofluid can improve operation stability and heat transfer limit and reduce starting power compared with water. With high heating power, thermal resistance of nanofluid was lower than that of water. With inclination of 60°, ICLPHP with nanofluid operated better and reduced sensitivity of inclination.

Operating Activity Visualization and Thermal Performance Measurement of Pulsating Heat Pipe

2016 ◽  
Vol 369 ◽  
pp. 42-47 ◽  
Author(s):  
Patrik Nemec ◽  
Zuzana Kolková ◽  
Milan Malcho
Keyword(s):  
Heat Transfer ◽  
Performance Measurement ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Vapour Phase ◽  
Working Fluid ◽  
Internal Diameter ◽  
Pulsating Heat Pipe ◽  
Inner Diameter ◽  
Thermo Physical Properties

Heat pipe is well known device which is used to heat transfer phase-change of working fluid. Pulsating heat pipe (PHP) is special type of heat pipe which heat transfer by pulsating movement of working fluid. Article deals about operating activity and thermal performance measurement of this special heat pipe. Operating activity visualization of PHP was performed with PHP made from glass. The two types of PHPs were made. The first PHP has internal diameter of tube 1 mm, second PHP has internal diameter of tube 1.5 mm and both PHPs have eleven meanders. The working fluids used in PHP were water and Fluorinert FC-72. These fluids were chose for their different thermo-physical properties and the visualization observe formation of liquid and vapour phase working fluid during filling process and working operation.Next, the article describes thermal performance measurement of PHP depending on working fluid amount and heat source temperature. Measurement was performed with PHP made from copper tube with inner diameter 1.5 mm curved to the twenty one meanders and filled with water. The results give us image about formation and distribution of working fluid in pulsating heat pipe and about influence of working fluid amount on the heat transfer ability of pulsating heat pipe.

Thermal Characteristics of a Cylindrical Heat Pipe using Multi-Layer Screen Mesh Wick

2018 ◽  
Vol 10 (5) ◽  
Author(s):  
R. Sankar Rao ◽  
S. Bhanu Prakash
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Thermal Characteristics ◽  
Wire Mesh ◽  
Working Fluid ◽  
Wick Structure ◽  
Screen Mesh

Heat pipe is the most widely used heat exchanging device in removal of heat from any given system at a faster rate. The thermal characteristics of heat pipe with single and multi-layered screen mesh wicks have been observed with two working fluids water and acetone. Heat pipe of length 250 mm and 12.7 mm outer diameter, made of copper material is used in all the trials of with and without wick structure. A 100 mesh stainless steel screen wire mesh is chosen as wick structure. Experiments were conducted at different heat loads and various inclinations with 100% fill ratio in evaporator. The performance is measured based on total thermal resistance and overall heat transfer coefficient. The heat pipe is found effective at 60o inclination with acetone as a working fluid and with four layered screen mesh wick. Uncertainty in thermal resistance and heat transfer coefficient is calculated for a heat input of 10W at 0 and 60 inclinations.

Sign in / Sign up

Export Citation Format

Share Document