Study on the Bubble Dynamics and the Exciting Force in a Bended Pipe Based on BEM

2016 ◽  
Author(s):  
Y. L. Liu ◽  
Z. L. Tian
Keyword(s):  
Numerical Model ◽  
Potential Theory ◽  
Bubble Dynamics ◽  
Flow Speed ◽  
Exciting Force ◽  
Incoming Flow ◽  
Bubble Motion ◽  
Dynamics Model ◽  
Pipe Surface ◽  
Direction Change

Nonlinear bubble dynamics in a pipeline and its exciting force are investigated by a numerical model based on BEM. The bubble motion is one of the main causes that the pipeline vibrates and generates noise in modern ships. The numerical bubble dynamics model is established under the incompressible potential theory. Bubble motion with different incoming flow in a bended pipe is simulated. We found that the bubble develops jet when it passes by the bend, and adjoin to the pipe surface in the side of the fillet center. The pulsation and the direction change of the bubble apply an exciting force on the pipe which has a positive correlation with the incoming flow speed and may lead vibration and noise.

scholarly journals Sensitivity study of diffuser angle and brim height parameters for the design of 3 kW Diffuser Augmented Wind Turbine

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Michał Lipian ◽  
Maciej Karczewski ◽  
Krzysztof Olasek
Keyword(s):  
Numerical Model ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Sensitivity Study ◽  
Flow Speed ◽  
Diffuser Angle

AbstractThe Diffuser Augmented Wind Turbine (DAWT) is an innovative mean to increase the power harvested by wind turbine. By encompassing the rotor with a diffusershaped duct it is possible to increase the flow speed through the turbine by about 40-50%. The study presents the development of a numerical model and its validation by the experiments performed in the wind tunnel of the Institute of Turbomachinery, TUL. Then, the numerical model is used for the geometry sensitivity study to optimize the shape of a diffuser. The paper presents that the DAWT technology has the potential to even double the power outcome of wind turbine when compared to a bare rotor version.

scholarly journals A new bubble dynamics model to study bubble growth, deformation, and coalescence

2014 ◽  
Vol 119 (1) ◽  
pp. 216-239 ◽  
Author(s):  
C. Huber ◽  
Y. Su ◽  
C. T. Nguyen ◽  
A. Parmigiani ◽  
H. M. Gonnermann ◽  
...  
Keyword(s):  
Bubble Growth ◽  
Bubble Dynamics ◽  
Dynamics Model

Numerical Model for Collision Damping of Blades’ Tips

2011 ◽  
Vol 130-134 ◽  
pp. 2349-2353
Author(s):  
Xue Jin ◽  
Ming Zhi Zhang ◽  
Hong Wei Li ◽  
Xiao Mei Zhang
Keyword(s):  
Numerical Model ◽  
Steam Turbine ◽  
Natural Frequency ◽  
Vibration Damping ◽  
Exciting Force ◽  
Harmonic Response ◽  
Response Characteristics ◽  
Rotating Blade ◽  
Impact Damping

In order to obtain the collision damping of blades’ tips characteristics, around a blades for a 300MW steam turbine, the COMBIN40 element of ANSYS was adopted. The collision damping among blades' tips is equivalent to a damping of spring and friction with a gap. Under the conditions of exciting force and rotating blade natural frequency ,the vibration of a harmonic response was analysed, the nonlinear impact damping of blade response characteristics and the vibration damping mechanism of collision was got.

Self-Propelled Sliding Bubble Motion Induced by Surface Microstructure in Pool Boiling of a Dielectric Fluid Under Microgravity

2015 ◽  
Vol 137 (2) ◽  
Author(s):  
Naveenan Thiagarajan ◽  
Sushil H. Bhavnani ◽  
Vinod Narayanan
Keyword(s):  
Vapor Bubble ◽  
Bubble Dynamics ◽  
Heated Surface ◽  
Pool Boiling ◽  
Bubble Nucleation ◽  
Radius Of Curvature ◽  
Dielectric Fluid ◽  
Bubble Motion ◽  
Reduced Gravity ◽  
Modification Technique

This paper reports bubble dynamics observed during pool boiling over microstructures with an asymmetric saw-tooth cross section, under reduced gravity. The periodic saw-toothed ratchets etched on a silicon surface include fabricated vapor bubble nucleation sites only on the shallow slope. Reduced gravity pool boiling experiments were conducted aboard a Boeing 727 aircraft carrying out parabolic maneuvers. The fluid used was FC-72, a highly wetting dielectric fluid used as a coolant for electronics. Under microgravity, it was observed that the bubble diameters were six times larger than in terrestrial gravity. Also, self-propelled sliding bubble motion along the surface of the saw teeth was observed in reduced gravity. The velocity of the sliding bubbles across the saw teeth, following lateral departure from the cavities, was measured to be as high as 27.4 mm/s. A model for the sliding bubble motion is proposed by attributing it to the force due to pressure differences that arise in the liquid film between the vapor bubble and the saw-toothed heated surface. The pressure difference is due to difference in the radius of curvature of the interface between the crest and trough of the saw teeth. The surface modification technique, which resulted in the sliding bubble motion, has the potential to alleviate dry-out caused due to stagnant vapor bubbles over heat sources under microgravity when the buoyancy forces are negligible compared to the surface tension forces.

Scaling of Tip Vortex Cavitation Inception Noise With a Bubble Dynamics Model Accounting for Nucleus Size Distribution

2003 ◽  
Author(s):  
Chao-Tsung Hsiao ◽  
Georges L. Chahine
Keyword(s):  
Size Distribution ◽  
Vortex Flow ◽  
Bubble Dynamics ◽  
Tip Vortex ◽  
Navier Stokes ◽  
Nucleus Size ◽  
Scaling Effects ◽  
Dynamics Model ◽  
Tip Vortex Cavitation ◽  
Cavitation Inception

A Surface-Averaged Pressure (SAP) spherical bubble dynamics model accounting for a statistical nuclei size distribution was used to model the acoustic signals generated by cavitating bubbles near inception in a tip vortex flow. The flow field generated by finite-span elliptic hydrofoils is obtained by Reynolds-Averaged Navier-Stokes computations. An “acoustic” criterion which defines the cavitation inception by counting the number of acoustical signal peaks that exceed a certain level per unit time was applied to deduce the cavitation inception number for different scales. It was found that the larger scale results in more cavitation inception events per unite time because more nuclei are excited by the tip vortex at the larger scale. The nuclei size was seen to have an important effect on cavitation inception number with scaling effects due to nuclei increasing as nuclei sizes decreases.

Dynamics and Breakup Regime of a Vapor Bubble Traveling Through a Heated T-Shaped Branching Microchannel

2020 ◽  
Author(s):  
Zhe Yan ◽  
Shanshan Li ◽  
Lichun Li ◽  
Bili Deng ◽  
Zhenhai Pan
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Vapor Bubble ◽  
Bubble Dynamics ◽  
Surface Force ◽  
Bubble Motion ◽  
Heat Transfer Characteristics ◽  
Bubble Breakup ◽  
Wall Superheat ◽  
Frame Method

Abstract Dynamics and breakup characteristics of a vapor bubble when traveling through the T-junction of a heated branching microchannel are numerically investigated with the Volume of Fluid-Continuum-Surface-Force (VOF-CSF) method. The moving reference frame method, which has been demonstrated to help suppressing the unphysical spurious velocity around the liquid-vapor interface (Numer. Heat Trans. 67, 1–12), is employed and coupled to the VOF-CSF model. In order to evaluate the influence of the wall heating on the growth and breakup of vapor bubble, the saturated-interface-volume phase change model is further coupled to account for the phase change on the bubble interface. The numerical model is first validated against experimental results in literature. Then the effect of wall superheat on bubble dynamics and heat transfer coefficient is investigated. Bubble motion, growth, breakup and heat transfer characteristics at different wall superheats are analyzed in detail. Four bubble breakup regimes are observed, namely non-breakup (NB), breakup with tunnel (TB), combined breakup (CB) and breakup with permanent obstruction (OB). The present study reveals the transport details around an evaporating vapor bubble and helps understanding the underlying physics of bubble behaviors when traveling through a T-shaped branching microchannel.

scholarly journals Dynamics of Rising Bubbles in a Quiescent Slag Bath with Varying Thermo-Physical Properties

2020 ◽  
Vol 51 (6) ◽  
pp. 2843-2861
Author(s):  
D. Obiso ◽  
D. H. Schwitalla ◽  
I. Korobeinikov ◽  
B. Meyer ◽  
M. Reuter ◽  
...  
Keyword(s):  
Physical Properties ◽  
Bubble Dynamics ◽  
Fluid Dynamic ◽  
Temperature Gradients ◽  
Slag Bath ◽  
Bubble Motion ◽  
Temperature Dependent ◽  
Slag Properties ◽  
Temperature Dependent Properties ◽  
Thermo Physical Properties

AbstractThe motion of bubbles in a liquid slag bath with temperature gradients is investigated by means of 3D fluid dynamic computations. The goal of the work is to describe the dynamics of the rising bubbles, taking into account the temperature dependency of the thermo-physical properties of the slag. Attention is paid to the modeling approach used for the slag properties and how this affects the simulation of the bubble motion. In particular, the usage of constant values is compared to the usage of temperature-dependent data, taken from models available in the literature and from in-house experimental measurements. Although the present study focuses on temperature gradients, the consideration of varying thermo-physical properties is greatly relevant for the fluid dynamic modeling of reactive slag baths, since the same effect is given by heterogeneous species and solid fraction distributions. CFD is applied to evaluate the bubble dynamics in terms of the rising path, terminal bubble shape, and velocity, the gas–liquid interface area, and the appearance of break-up phenomena. It is shown that the presence of a thermal gradient strongly acts on the gas–liquid interaction when the temperature-dependent properties are considered. Furthermore, the use of literature models and experimental data produces different results, demonstrating the importance of correctly modeling the slag’s thermo-physical properties.

Sign in / Sign up

Export Citation Format

Share Document