Time-History Analysis of a Super-Large Storage Tank Under Seismic Excitation

2013 ◽  
Author(s):  
Fan Bu ◽  
Caifu Qian
Keyword(s):  
Storage Tank ◽  
Time History ◽  
Time History Analysis ◽  
Radial Deformation ◽  
Tank Wall ◽  
History Analysis ◽  
Medium Level ◽  
Wall Deformation ◽  
Slow Progress ◽  
Earthquake Action

In this paper, two finite element models are established for a super-large storage tank with or without a floating roof on the medium level. Time-history analysis with consideration of fluid-solid coupling for the deformation of tank wall and medium sloshing during or after an earthquake is performed with the emphasis on the effects of the floating roof. It is found that the upper part of tank is more sensitive to the earthquake action than the lower part. The wind girders and the reinforcing rings play a big role in limiting the radial deformation of the upper part of the tank wall. The floating roof has little effect on the tank wall deformation, but it is effective in suppressing the medium sloshing during the earthquake. After the earthquake, the radial deformation of the tank wall attenuates quickly, but the sloshing attenuation of the medium presents a slow progress and the floating roof inhibits the sloshing attenuation of the medium.

Study on Seismic Performance of Reinforced Concrete Masonry High-Rise Building

2012 ◽  
Vol 166-169 ◽  
pp. 2164-2170
Author(s):  
Xu Jie Sun ◽  
Hou Zhang ◽  
Da Gang Lu ◽  
Feng Lai Wang
Keyword(s):  
Reinforced Concrete ◽  
Response Spectrum ◽  
Pushover Analysis ◽  
Time History ◽  
Time History Analysis ◽  
Masonry Building ◽  
Analysis Method ◽  
Concrete Masonry ◽  
History Analysis ◽  
Earthquake Action

The design process of the 100 m high reinforced concrete masonry building in China was firstly presented, deformation check calculation under earthquake action by mode-superposition response spectrum method and time-history analysis method were detailed and deformation under wind load was also checked. Then elastic-plastic deformation under earthquake action was checked by time-history analysis method and pushover analysis method with both under uniform load and reverse triangle load. The conclusion is construct 100 m high office building built in Fortification intensity 6 by reinforced concrete masonry is feasible. Then the building was redesigned as built in fortification 7, the same check was performed as that have been done in fortification 6, it is feasible too.

Time-History Analysis of Seismic Performance of Metro Station by Top-Down Boring with Cast-In Situ Arch

2012 ◽  
Vol 256-259 ◽  
pp. 2216-2221 ◽  
Author(s):  
De Yun Ding ◽  
Wei Feng Wang ◽  
Mei Qun Huang ◽  
Xiu Ren Yang ◽  
Zong Zhen Wu
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Time History Analysis ◽  
Top Down ◽  
Metro Station ◽  
Main Structure ◽  
History Analysis ◽  
Earthquake Action ◽  
Rare Earthquake

Taken the Dawanglu station of Beijing metro line 14 as engineering background, the seismic performance of metro station by top-down boring with cast-in-situ arch under rare earthquake action (E3) is researched. A three-dimensional dynamic model is established by using the finite element program MIDAS/GTS. Through the time-history analysis method, the displacement response of the main structure of metro station is obtained. The storey relative displacement and storey drift angle of the main structure are mainly analyzed. Numerical results show that under rare earthquake action, metro station structure can satisfy the requirements of the seismic performance, and can be regarded as a valuable reference for the design.

PERILAKU STRUKTUR BAJA TIPE MRF DENGAN BEBAN LATERAL BERDASARKAN SNI 1726-2012 DAN METODE PERFORMANCE BASED PLASTIC DESIGN (PBPD)

2014 ◽  
Vol 13 (1) ◽  
Author(s):  
Nidiasari Jati Sunaryati Eem Ikhsan
Keyword(s):  
Pushover Analysis ◽  
Time History ◽  
Time History Analysis ◽  
Plastic Design ◽  
History Analysis ◽  
Non Linear ◽  
Static Pushover Analysis

Struktur rangka baja pemikul momen merupakan jenis struktur baja tahan gempa yang populer digunakan. Daktilitas struktur yang tinggi merupakan salah satu keunggulan struktur ini, sehingga mampu menahan deformasi inelastik yang besar. Dalam desain, penggunaan metode desain elastis berupa evaluasi non-linear static (Pushover analysis) maupun evaluasi non-linear analisis (Time History Analysis) masih digunakan sebagai dasar perencanaan meskipun perilaku struktur sebenarnya saat kondisi inelastik tidak dapat digambarkan dengan baik. Metode Performance-Based Plastic Design (PBPD) berkembang untuk melihat perilaku struktur sebenarnya dengan cara menetapkan terlebih dahulu simpangan dan mekanisme leleh struktur sehingga gaya geser dasar yang digunakan adalah sama dengan usaha yang dibutuhkan untuk mendorong struktur hingga tercapai simpangan yang telah direncanakan. Studi dilakukan terhadap struktur baja 5 lantai yang diberi beban gempa berdasarkan SNI 1726, 2012 dan berdasarkan metode PBPD. Hasil analisa menunjukkan bahwa struktur yang diberi gaya gempa berdasarkan metode PBPD mencapai simpangan maksimum sesuai simpangan rencana dan kinerja struktur yang dihasilkan lebih baik .

scholarly journals Record-to-record variability and code-compatible seismic safety-checking with limited number of records

2021 ◽  
Author(s):  
Fatemeh Jalayer ◽  
Hossein Ebrahimian ◽  
Andrea Miano
Keyword(s):  
Seismic Hazard ◽  
Linear Time ◽  
Time History ◽  
Time History Analysis ◽  
Seismic Safety ◽  
Hazard Curve ◽  
History Analysis ◽  
Non Linear ◽  
Seismic Hazard Curve ◽  
Cloud Analysis

AbstractThe Italian code requires spectrum compatibility with mean spectrum for a suite of accelerograms selected for time-history analysis. Although these requirements define minimum acceptability criteria, it is likely that code-based non-linear dynamic analysis is going to be done based on limited number of records. Performance-based safety-checking provides formal basis for addressing the record-to-record variability and the epistemic uncertainties due to limited number of records and in the estimation of the seismic hazard curve. “Cloud Analysis” is a non-linear time-history analysis procedure that employs the structural response to un-scaled ground motion records and can be directly implemented in performance-based safety-checking. This paper interprets the code-based provisions in a performance-based key and applies further restrictions to spectrum-compatible record selection aiming to implement Cloud Analysis. It is shown that, by multiplying a closed-form coefficient, code-based safety ratio could be transformed into simplified performance-based safety ratio. It is shown that, as a proof of concept, if the partial safety factors in the code are set to unity, this coefficient is going to be on average slightly larger than unity. The paper provides the basis for propagating the epistemic uncertainties due to limited sample size and in the seismic hazard curve to the performance-based safety ratio both in a rigorous and simplified manner. If epistemic uncertainties are considered, the average code-based safety checking could end up being unconservative with respect to performance-based procedures when the number of records is small. However, it is shown that performance-based safety checking is possible with no extra structural analyses.

Nonlinear Dynamic Analysis of the Damping Frame Structure System

2012 ◽  
Vol 594-597 ◽  
pp. 886-890 ◽  
Author(s):  
Gan Hong ◽  
Mei Li ◽  
Yi Zhen Yang
Keyword(s):  
Energy Dissipation ◽  
Seismic Response ◽  
Nonlinear Dynamic ◽  
Time History ◽  
Time History Analysis ◽  
Frame Structure ◽  
Force Model ◽  
Operating Characteristics ◽  
Restoring Force ◽  
History Analysis

Abstract. In the paper, take full account of energy dissipation operating characteristics. Interlayer shear-frame structure for the analysis of the Wilson-Θmethod ELASTOPLASTIC schedule, the design of a nonlinear dynamic time history analysis procedure. On this basis, taking into account the restoring force characteristics of the energy dissipation system, the inflection point in the restoring force model treatment, to avoid a result of the calculation results of distortion due to the iterative error. A frame structure seismic response time history analysis results show that: the framework of the energy dissipation significantly lower than the seismic response of the common framework, and its role in the earthquake when more significant.

Elastic-Plastic Time History Analysis of MR Damping Structure Based on LQG Algorithm

2016 ◽  
Vol 858 ◽  
pp. 145-150
Author(s):  
Yu Liang Zhao ◽  
Zhao Dong Xu
Keyword(s):  
Optimal Control ◽  
Time History ◽  
Mr Damper ◽  
Time History Analysis ◽  
Control Force ◽  
Control Effect ◽  
Damping Force ◽  
Optimal Control Strategy ◽  
Elastic Plastic ◽  
History Analysis

This paper discussed an elastic-plastic time-history analysis on a structure with MR dampers based on member model, in which the elastoplastic member of the structure is assumed to be single component model and simulated by threefold line stiffness retrograde model. In order to obtain better control effect, Linear Quadratic Gaussian (LQG) control algorithm is used to calculate the optimal control force, and Hrovat boundary optimal control strategy is used to describe the adjustable damping force range of MR damper. The effectiveness of the MR damper based on LQG algorithm to control the response of the structure was investigated. The results from numerical simulations demonstrate that LQG algorithm can effectively improve the response of the structure against seismic excitations only with acceleration feedback.

Sign in / Sign up

Export Citation Format

Share Document