scholarly journals The XGIS instrument on-board THESEUS: the detection plane and on-board electronics

Author(s):  
Fabio Fuschino ◽  
Riccardo Campana ◽  
Claudio Labanti ◽  
Lorenzo Amati ◽  
Enrico Virgilli ◽  
...  
Keyword(s):  
2012 ◽  
Vol 710 ◽  
pp. 234-259 ◽  
Author(s):  
B.-Q. Deng ◽  
C.-X. Xu

AbstractNear-wall streamwise vortices are closely related to the generation of high skin friction in wall-bounded turbulent flows. A common feature of controlled, friction-reduced turbulent flows is weakened near-wall streamwise vortices. In the present study, the streak transient growth (STG) mechanism for generating near-wall streamwise vortices by Schoppa & Hussain (J. Fluid Mech., vol. 453, 2002, pp. 57–108) is employed, and the opposition control proposed by Choi, Moin & Kim (J. Fluid Mech., vol. 262, 1994, pp. 75–110) is imposed during the transient growth process of perturbations to determine how active control affects the generation of quasi-streamwise vortices. In the transient growth stage, when the detection plane is located near the wall (${ y}_{d}^{+ } = 15$), the control can suppress the production of streamwise vorticity by weakening the near-wall vertical velocity; when the detection plane moves away from the wall (${ y}_{d}^{+ } = 28$), the control has the opposite effect. In the vortex generation stage, the control cannot change the dominance of the stretching effect. Controls imposed at different stages reveal the importance of the STG stage in vortex generation. Strengthened out-of-phase control and lessened in-phase control are proposed as an extension of the original opposition-control scheme. Application in a fully developed turbulent channel flow shows that strengthened ${ y}_{d}^{+ } = 10$ control can yield an even higher drag reduction rate than the original ${ y}_{d}^{+ } = 15$ control. Moreover, lessened ${ y}_{d}^{+ } = 28$ control can also achieve drag reduction and turbulence suppression.


2014 ◽  
Author(s):  
K. Lacombe ◽  
R. Pons ◽  
C. Amoros ◽  
J.-L. Atteia ◽  
D. Barret ◽  
...  

2014 ◽  
Author(s):  
G. Nasser ◽  
O. Godet ◽  
J.-L. Atteia ◽  
C. Amoros ◽  
D. Barret ◽  
...  
Keyword(s):  

2021 ◽  
Vol 11 ◽  
Author(s):  
Lin Wang ◽  
Xiaowei He ◽  
Jingjing Yu

Cerenkov luminescence tomography (CLT) has attracted much attention because of the wide clinically-used probes and three-dimensional (3D) quantification ability. However, due to the serious morbidity of 3D optical imaging, the reconstructed images of CLT are not appreciable, especially when single-view measurements are used. Single-view CLT improves the efficiency of data acquisition. It is much consistent with the actual imaging environment of using commercial imaging system, but bringing the problem that the reconstructed results will be closer to the animal surface on the side where the single-view image is collected. To avoid this problem to the greatest extent possible, we proposed a prior compensation algorithm for CLT reconstruction based on depth calibration strategy. This method takes full account of the fact that the attenuation of light in the tissue will depend heavily on the depth of the light source as well as the distance between the light source and the detection plane. Based on this consideration, a depth calibration matrix was designed to calibrate the attenuation between the surface light flux and the density of the internal light source. The feature of the algorithm was that the depth calibration matrix directly acts on the system matrix of CLT reconstruction, rather than modifying the regularization penalty items. The validity and effectiveness of the proposed algorithm were evaluated with a numerical simulation and a mouse-based experiment, whose results illustrated that it located the radiation sources accurately by using single-view measurements.


Author(s):  
Shiyao Wang ◽  
M. Gajdardziska-Josifovska ◽  
J.M. Cowley

The properties of multilayer thin film materials are strongly influenced by the structure of their interfaces. The numerous applications for these materials motivate electron microscopy studies of cross sectional samples in which the interfaces are observed edge on. High resolution imaging is the most established technique, but other techniques, such as Fresnel fringe method and refraction at interfaces, have also been employed to characterize the structure and abruptness of amorphous/polycrystalline multilayers. The aim of this work is to explore the applicability of shadow images from coherent sources to the studies of multilayers.Coherent interference effects are readily observable in the diffraction plane of a VG HB-5 STEM which is equipped with a cold field emission gun. The shadow image of the studied Si/Mo multilayer is obtained on the detection plane when the specimen is illuminated by a stationary convergent beam. This beam is formed with a very large or no objective aperture. Low magnification images are produced at large values of defocus (Fig. 1a), while for lower defocus the magnification increases and the shadow images become more and more distorted because of the objective lens aberration (Fig. 1b and 1c). In addition to the high sensitivity to the defocus. spherical aberration and probe position, the shadow images also appear to be dependent on the interface abruptness.


1996 ◽  
Author(s):  
Claudio Labanti ◽  
Guido Di Cocco ◽  
Giuseppe Malaguti ◽  
Alessandro Mauri ◽  
Elio Rossi ◽  
...  

2018 ◽  
Vol 174 ◽  
pp. 01014
Author(s):  
Konstantinos Ntekas

The ATLAS collaboration at LHC has endorsed the resistive Micromegas technology (MM), along with the small-strip Thin Gap Chambers (sTGC), for the high luminosity upgrade of the first muon station in the high-rapidity region, the so called New Small Wheel (NSW) project. The NSW requires fully efficient MM chambers, up to a particle rate of ∼ 15 kHz/cm2, with spatial resolution better than 100 μm independent of the track incidence angle and the magnetic field (B ≤ 0.3 T). Along with the precise tracking the MM should be able to provide a trigger signal, complementary to the sTGC, thus a decent timing resolution is required. Several tests have been performed on small (10 × 10 cm2) MM chambers using medium (10 GeV/c) and high (150 GeV/c) momentum hadron beams at CERN. Results on the efficiency and position resolution measured during these tests are presented demonstrating the excellent characteristics of the MM that fulfil the NSW requirements. Exploiting the ability of the MM to work as a Time Projection Chamber a novel method, called the μTPC, has been developed for the case of inclined tracks, allowing for a precise segment reconstruction using a single detection plane. A detailed description of the method along with thorough studies towards refining the method’s performance are shown. Finally, during 2014 the first MM quadruplet (MMSW) following the NSW design scheme, comprising four detection planes in a stereo readout configuration, has been realised at CERN. Test-beam results of this prototype are discussed and compared to theoretical expectations.


Author(s):  
Bao Du ◽  
Hong-Bo Cai ◽  
Wen-Shuai Zhang ◽  
Shi-Yang Zou ◽  
Jing Chen ◽  
...  

The Weibel instability and the induced magnetic field are of great importance for both astrophysics and inertial confinement fusion. Because of the stochasticity of this magnetic field, its main wavelength and mean strength, which are key characteristics of the Weibel instability, are still unobtainable experimentally. In this paper, a theoretical model based on the autocorrelation tensor shows that in proton radiography of the Weibel-instability-induced magnetic field, the proton flux density on the detection plane can be related to the energy spectrum of the magnetic field. It allows us to extract the main wavelength and mean strength of the two-dimensionally isotropic and stochastic magnetic field directly from proton radiography for the first time. Numerical calculations are conducted to verify our theory and show good consistency between pre-set values and the results extracted from proton radiography.


Sign in / Sign up

Export Citation Format

Share Document