Optimizing the x-ray photon energy for digital radiographic imaging systems

Author(s):  
Walter Huda ◽  
Harry A. Kissi ◽  
Kent M. Ogden ◽  
John M. Boone
2006 ◽  
Author(s):  
J. A. Rowlands ◽  
Christie A. Webster ◽  
Ivaylo Koprinarov ◽  
Peter Oakham ◽  
Kelly C. Schad ◽  
...  

2020 ◽  
Author(s):  
Kiranjot ◽  
Mangalika Sinha ◽  
R. K. Gupta ◽  
P. K. Yadav ◽  
Mohammed H. Modi

Instruments ◽  
2021 ◽  
Vol 5 (2) ◽  
pp. 17
Author(s):  
Eldred Lee ◽  
Kaitlin M. Anagnost ◽  
Zhehui Wang ◽  
Michael R. James ◽  
Eric R. Fossum ◽  
...  

High-energy (>20 keV) X-ray photon detection at high quantum yield, high spatial resolution, and short response time has long been an important area of study in physics. Scintillation is a prevalent method but limited in various ways. Directly detecting high-energy X-ray photons has been a challenge to this day, mainly due to low photon-to-photoelectron conversion efficiencies. Commercially available state-of-the-art Si direct detection products such as the Si charge-coupled device (CCD) are inefficient for >10 keV photons. Here, we present Monte Carlo simulation results and analyses to introduce a highly effective yet simple high-energy X-ray detection concept with significantly enhanced photon-to-electron conversion efficiencies composed of two layers: a top high-Z photon energy attenuation layer (PAL) and a bottom Si detector. We use the principle of photon energy down conversion, where high-energy X-ray photon energies are attenuated down to ≤10 keV via inelastic scattering suitable for efficient photoelectric absorption by Si. Our Monte Carlo simulation results demonstrate that a 10–30× increase in quantum yield can be achieved using PbTe PAL on Si, potentially advancing high-resolution, high-efficiency X-ray detection using PAL-enhanced Si CMOS image sensors.


2014 ◽  
Vol 44 (8) ◽  
pp. 1026-1030
Author(s):  
Mark G. Benz ◽  
Matthew W. Benz ◽  
Steven B. Birnbaum ◽  
Eric Chason ◽  
Brian W. Sheldon ◽  
...  

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Yusuf Özbek ◽  
Michael Vogele ◽  
Christian Plattner ◽  
Pedro Costa ◽  
Mario Griesser ◽  
...  

AbstractFluoroscopy-guided percutaneous biopsy interventions are mostly performed with traditional free-hand technique. The practical experience of the surgeon influences the duration of the intervention and the radiation exposure for patients and him-/herself. Especially when the placement of heavy and long instruments in double oblique angles is required, manual techniques reach their technical limitations very fast. The system presented herein automatizes the needle positioning using only two 2D scans while the robotic platform guides the intervention. These two images were used to plan the needle pathway and to estimate the pose of the robot using a custom-made end-effector with embedded registration fiducials. The estimated pose was subsequently used to transfer the planed needle path to the robot’s coordinate system and finally to compute the movement parameters in order to align the robot with this plan. To evaluate the system, two phantoms with 11 different targets on it were developed. The targets were punctured, and the application accuracy was measured quantitatively. The solution achieved sub-millimetric accuracy for needle placement (min. 0.23, max. 1.04 in mm). Our approach combines the advantages of fluoroscopic imaging and ensures automatic needle alignment with highly reduced X-ray radiation. The proposed system shows promising potential to be a guidance platform that is easy to combine with available fluoroscopic imaging systems and provides valuable help to the physician in more difficult interventions.


2018 ◽  
Vol 167 ◽  
pp. 03001 ◽  
Author(s):  
Przemyslaw Wachulak ◽  
Alfio Torrisi ◽  
Mesfin Ayele ◽  
Andrzej Bartnik ◽  
Joanna Czwartos ◽  
...  

In this work we present three experimental, compact desk-top imaging systems: SXR and EUV full field microscopes and the SXR contact microscope. The systems are based on laser-plasma EUV and SXR sources based on a double stream gas puff target. The EUV and SXR full field microscopes, operating at 13.8 nm and 2.88 nm wavelengths are capable of imaging nanostructures with a sub-50 nm spatial resolution and short (seconds) exposure times. The SXR contact microscope operates in the “water-window” spectral range and produces an imprint of the internal structure of the imaged sample in a thin layer of SXR sensitive photoresist. Applications of such desk-top EUV and SXR microscopes, mostly for biological samples (CT26 fibroblast cells and Keratinocytes) are also presented. Details about the sources, the microscopes as well as the imaging results for various objects will be presented and discussed. The development of such compact imaging systems may be important to the new research related to biological, material science and nanotechnology applications.


Author(s):  
Dipayan Das ◽  
KC Santosh ◽  
Umapada Pal

Abstract Since December 2019, the Coronavirus Disease (COVID-19) pandemic has caused world-wide turmoil in less than a couple of months, and the infection, caused by SARS-CoV-2, is spreading at an unprecedented rate. AI-driven tools are used to identify Coronavirus outbreaks as well as forecast their nature of spread, where imaging techniques are widely used, such as CT scans and chest X-rays (CXRs). In this paper, motivated by the fact that X-ray imaging systems are more prevalent and cheaper than CT scan systems, a deep learning-based Convolutional Neural Network (CNN) model, which we call Truncated Inception Net, is proposed to screen COVID-19 positive CXRs from other non-COVID and/or healthy cases. To validate our proposal, six different types of datasets were employed by taking the following CXRs: COVID-19 positive, Pneumonia positive, Tuberculosis positive, and healthy cases into account. The proposed model achieved an accuracy of 99.96% (AUC of 1.0) in classifying COVID- 19 positive cases from combined Pneumonia and healthy cases. Similarly, it achieved an accuracy of 99.92% (AUC of 0.99) in classifying COVID-19 positive cases from combined Pneumonia, Tuberculosis and healthy CXRs. To the best of our knowledge, as of now, the achieved results outperform the existing AI-driven tools for screening COVID-19 using CXRs.


Sign in / Sign up

Export Citation Format

Share Document