Optimization of Boron and Zinc on the Growth and Yield Parameters of Tomato (Solanum lycopersicum L.) in Nalanda District

The field experiment was carried out to overcome the poor growth and yield of tomato due to imbalance use of fertilizer and micronutrient deficiency. The objective to conduct this experiment was soil application of micronutrients alongwith nitrogen, phosphorus and potash for growth and yield enhancement. The maximum 90.39 cm plant height,the heighest 14.38 number of branches,the maximum 29.50 number of fruits per plant, heighest fruir weight per plant 2.46 kg per plant with yield of 518.25 quintal per heactare in case of technology option three application of 120.80.80 kg N:P:K ha-1 alongwith 10kg zinc and 1 kg boron per hectare as basal dose in comparision to other treatments. The lowest 80.45 cm plant height, least number of branches per plant 8.13,lesser number of fruit per plant 24.13, least fruit weight 2.18 kgper plant with minimum yield of 450.50 quintal per hectare was recorded in control.

Biologicals and New Generation Fungicides in the Management of Blast Disease in Rice

Background: Blast is a devastating disease in rice production. The current research tested the efficacy of biologicals and fungicides against blast. Aqueous extracts of Azadirachta indica, Ocimum basalicum, Cymbopogan flexousus, Thymus vulgaris, Aloe vera, Tagetes patula, Cordia curassavica, Aegle marmelos, Allium fistulosum, Syzygium aromaticum, and Calotropis gigantea were tested in vitro at 5, 10, and 15% concentrations against Magnaporthe oryzae. Also, two isolates, Bacillus cereus OG2L and B. subtilis OG2A, and one isolate, Azotobacter SAG19, and, similarly, five new generation fungicides were evaluated at three different doses against blast pathogen M. oryzae in vitro. The treatments that exhibited the best performance in vitro were further evaluated against blast disease under field conditions.Results: Extracts of T. patula (5%), C. gigantea (5%), C. curassavica (10%), A. fistulosum (10%), and A. marmelos (15%) showed greater than 81% inhibition to M. oryzae in vitro. Likewise, all three biocontrol agents, viz. B. cereus OG2L, B. subtilis OG2A, and Azotobacter SAG19, demonstrated more than 50% inhibition of mycelial growth of pathogen in vitro, and the commercial formulations of fungicides Propineb, Trifloxystrobin+Tebuconazole, Tebuconazol+Triadimenol, Bacillus subtilis Strain QST 713, and Cinnamon Oil 8%+Clove Oil 2% also significantly inhibited M. oryzae. Under field conditions, C. curassavica (10%), A. marmelos (15%), C. gigantea (5%); B.cereus OG2L; B.subtilis OG2A; Proineb and Trifloxystrobin+Tebuconazole were effective in reducing disease in addition to yield enhancement.Conclusion: Overall, the plant extracts (C. curassavica at 10%, A. marmelos at 15%, C. gigantea at 5%); bio-agents (B. cereus OG2L, B. subtilis OG2A both at 2g/l), and new generation fungicides Antracol 70WP (Proineb) at 2.5 g/l and Nativo 75 WG (Trifloxystrobin+Tebuconazole) at 0.5 g/l provided effective control against blast disease and superior plant growth and yield compared with other treatments and untreated control.

Biodiesel yield enhancement through optimizing process parameters with assistance of solar energy—Taguchi and response surface methodology application

In today’s scenario, biodiesel is one of the best alternatives to diesel for application as an eco-friendly product. In this work, jojoba oil is transesterified using solar energy for heating purposes. A solar parabolic trough collector having 6.4 m2 and 89% reflectivity is used to concentrate solar rays on a sealed container containing jojoba oil and catalyst-alcohol mixture, placed at the focus of the dish. The performance parameters like molar ratio (MR), reaction time (RT), and catalyst concentration (CC) are optimized. The result showed the highest yield of 89.67% at the optimum condition of molar ratio 9:1, reaction time 120 min, and catalyst concentration 0.8 wt.%. The highest contribution of 55.13% is measured for the molar ratio, followed by reaction time and catalyst concentration. Later, the interaction between MR, RT, and CC is established by response surface/contour plots; and their effects on biodiesel yield are discussed. Subsequently, the various physicochemical properties of raw jojoba oil and jojoba oil methyl ester are also measured and discussed as per ASTM standards. The unsaturated acid content in the biodiesel is also measured by gas chromatography. Hence, the blends of linseed oil with diesel fuel can be used in the IC engines with little or no modifications in engine parameters. Therefore, the use of solar energy could effectively reduce the use of electricity to cut down the processing cost in biodiesel production. Also, the methods should be established for methanol recovery from glycerine.

Use of Membrane Technologies in Dairy Industry: An Overview

The use of treatments of segregated process streams as a water source, as well as technical fluid reuse as a source of value-added recovery products, is an emerging direction of resource recovery in several applications. Apart from the desired final product obtained in agro-food industries, one of the challenges is the recovery or separation of intermediate and/or secondary metabolites with high-added-value compounds (e.g., whey protein). In this way, processes based on membranes, such as microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO), could be integrated to treat these agro-industrial streams, such as milk and cheese whey. Therefore, the industrial application of membrane technologies in some processing stages could be a solution, replacing traditional processes or adding them into existing treatments. Therefore, greater efficiency, yield enhancement, energy or capital expenditure reduction or even an increase in sustainability by producing less waste, as well as by-product recovery and valorization opportunities, could be possible, in line with industrial symbiosis and circular economy principles. The maturity of membrane technologies in the dairy industry was analyzed for the possible integration options of membrane processes in their filtration treatment. The reported studies and developments showed a wide window of possible applications for membrane technologies in dairy industry treatments. Therefore, the integration of membrane processes into traditional processing schemes is presented in this work. Overall, it could be highlighted that membrane providers and agro-industries will continue with a gradual implementation of membrane technology integration in the production processes, referring to the progress reported on both the scientific literature and industrial solutions commercialized.

Genotoxic Evaluation of Fe3O4 Nanoparticles in Different Three Barley (Hordeum vulgare L.) Genotypes to Explore the Stress-Resistant Molecules

Sustainable agricultural practices are still essential due to soil degradation and crop losses. Recently, the relationship between plants and nanoparticles (NPs) attracted scientists’ attention, especially for applications in agricultural production as nanonutrition. Therefore, the present research was carried out to investigate the effect of Fe3O4 NPs at low concentrations (0, 1, 10, and 20 mg/L) on three genotypes of barley (Hordeum vulgare L.) seedlings grown in hydroponic conditions. Significant increases in seedling growth, enhanced chlorophyll quality and quantity, and two miRNA expression levels were observed. Additionally, increased genotoxicity was observed in seedlings grown with NPs. Generally, Fe3O4 NPs at low concentrations could be successfully used as nanonutrition for increasing barley photosynthetic efficiency with consequently enhanced yield. These results are important for a better understanding of the potential impact of Fe3O4 NPs at low concentrations in agricultural crops and the potential of these NPs as nanonutrition for barley growth and yield enhancement. Future studies are needed to investigate the effect of these NPs on the expression of resistance-related genes and chlorophyll synthesis-related gene expression in treated barley seedlings.

Effects of Superhydrophobic Sand Mulching on Evapotranspiration and Phenotypic Responses in Tomatoes (Solanum lycopersicum) under Normal and Reduced Irrigation

Irrigated agriculture in arid and semi-arid regions is a vital contributor to the global food supply; however, these regions endure massive evaporative losses that are compensated by unsustainable freshwater withdrawals. Plastic mulches have been used to curtail evaporation, improve water-use efficiency, and ensure food and water security, but they are non-biodegradable and their disposal is unsustainable. We recently developed superhydrophobic sand (SHS), which comprises sand grains with a nanoscale wax coating that could offer a more sustainable mulching solution. Here, the effects of adding a 1.0 cm-thick layer of SHS mulch on the evapotranspiration and phenotypic responses of tomato (Solanum lycopersicum) plants are studied under normal and reduced irrigation. Under both irrigation regimes, SHS mulching suppressed evaporation and enhanced transpiration by 78% and 17%, respectively relative to the bare soil. Overall, SHS mulching enhanced root xylem vessel diameter, stomatal aperture, stomatal conductance, and chlorophyll content index by 21%, 25%, 28%, and 23%, respectively. Total fruit yields, total dry mass, and harvest index increased in SHS-mulched plants by 33%, 20%, and 16%, respectively than in bare soil. These findings demonstrate the potential of SHS to boost irrigation efficiency in water-limited environments and provide mechanistic insights behind yield enhancement by SHS mulching.