Intensification of thermal destruction of nonvolatile condensed systems near the phase-state interface

2006 ◽  
Vol 51 (9) ◽  
pp. 469-473 ◽  
Author(s):  
O. F. Shlensky
2008 ◽  
Vol 128 (7) ◽  
pp. 1185-1190 ◽  
Author(s):  
Kuniaki Fujimoto ◽  
Hirofumi Sasaki ◽  
Mitsutoshi Yahara
Keyword(s):  

2019 ◽  
Author(s):  
Matthieu Riva ◽  
Yuzhi Chen ◽  
Zhang, Yue ◽  
Ziying Lei ◽  
Nicole Olson ◽  
...  

<div>Acid-driven multiphase chemistry of isoprene epoxydiols (IEPOX), a key isoprene oxidation product, with inorganic sulfate aerosol yields substantial amounts of secondary organic aerosol (SOA) through the formation of organosulfur. The extent and implications of inorganic-to-organic sulfate conversion, however, are unknown. Herein, we reveal that extensive consumption of inorganic sulfate occurs, which increases with the IEPOX-to-inorganic sulfate ratio (IEPOX:Sulf<sub>inorg</sub>), as determined by laboratory and field measurements. We further demonstrate that organosulfur greatly modifies critical aerosol properties, such as acidity, morphology, viscosity, and phase state. These new mechanistic insights reveal that changes in SO<sub>2</sub> emissions, especially in isoprene-dominated environments, will significantly alter biogenic SOA physicochemical properties. Consequently, IEPOX:Sulf<sub>inorg</sub> will play a central role in understanding historical climate and determining future impacts of biogenic SOA on global climate and air quality.</div>


2018 ◽  
Author(s):  
Ibukun Makinde

Gas condensates are liquid mixtures of high-boiling hydrocarbons of various structures, separated from natural gases during their production at gas condensate fields. When transporting gas through pipelines, the following gas quality conditions should be met:i.During transportation, gases should not cause corrosion of pipelines, fittings, instruments, etc.ii.The quality of the gas must ensure its transportation in a single-phase state i.e., liquid hydrocarbons, gas condensates and hydrates should not form in the pipelines.In order for gas condensates to meet the above-mentioned quality conditions during storage or transportation, they must be stabilized. Gas condensate stabilization is the process of “boiling off” light hydrocarbons from the condensate that would otherwise increase the vapor pressure when conditions are fluctuating.


2020 ◽  
Vol 57 (3) ◽  
pp. 249-259
Author(s):  
Baifen Liu ◽  
Mohammad Mirjalili ◽  
Peiman Valipour ◽  
Sajad Porzal ◽  
shirin Nourbakhsh

This research deals with the mechanical properties, microstructure, and interrelations of triple nanocomposite based on PET/EPDM/Nanoclay. These properties were examined in different percentages of PET/EPDM blend with compatibilizer (Styrene-Ethylene/Butylene-Styrene)-G-(Maleic anhydrate) (SEBS-g-MAH). Results showed that the addition of 15% SEBS-g-MAH improved the toughness and impact strength of this nanocomposite. SEM micrographs indicated the most stable fuzzy microstructure in a 50/50 mixture of scattered phases of EPDM/SEBS-g-MAH. The effects of percentages of 1, 3, 5, 7 nanoclay Cloisite 30B (C30B) on the improvement of the properties were evaluated. With the addition of nano clay, the toughness and impact strength was reduced. Thermal destruction of nanoclay in processing temperature led to the decreasing dispersion of clay plates in the matrix and a reduction in the distances of nano clay plates in the composite compared to pure nano clay. XRD and TEM analysis was used to demonstrate the results. By adding 1% of nanoclay to the optimal sample, maximum stiffness, and Impact strength, among other nanocomposites, was achieved.


2018 ◽  
Vol 951 ◽  
pp. 012007 ◽  
Author(s):  
A A Lebedev ◽  
V Y Davydov ◽  
D Y Usachov ◽  
S P Lebedev ◽  
A N Smirnov ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document