The study of Ni3Al phase formation using the method of differential scanning calorimetry

2013 ◽  
Vol 4 (4) ◽  
pp. 284-286
Author(s):  
T. V. Kurikhina ◽  
V. N. Simonov
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Formation ◽  
Scanning Calorimetry ◽  
Ni3al Phase

scholarly journals Polymorphism of 1,3-X-adamantanes (X = Br, OH, CH3) and the crystal plastic phase formation ability

CrystEngComm ◽  
2020 ◽  
Vol 22 (7) ◽  
pp. 1230-1238 ◽  
Author(s):  
Philippe Negrier ◽  
Bacem Ben Hassine ◽  
Maria Barrio ◽  
Michela Romanini ◽  
Denise Mondieig ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
High Pressure ◽  
Phase Formation ◽  
Powder Diffraction ◽  
Scanning Calorimetry ◽  
Density Measurements ◽  
X Ray ◽  
Plastic Phase

The polymorphism of 1,3-dimethyladamantane (13DMA), 1,3-adamantanediol (13DOHA) and 1,3-dibromoadamantane (13DBrA) has been studied by X-ray powder diffraction, density measurements and differential scanning calorimetry at normal and high-pressure.

A Model for Formation and Consumption of Transient Phase

2011 ◽  
Vol 172-174 ◽  
pp. 646-651 ◽  
Author(s):  
Gamra Tellouche ◽  
Khalid Hoummada ◽  
Dominique Mangelinck ◽  
Ivan Blum
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Formation ◽  
Transient Phase ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Proposed Model ◽  
Transient Phases ◽  
Kinetics Of

The phase formation sequence of Ni silicide for different thicknesses is studied by in situ X ray diffraction and differential scanning calorimetry measurements. The formation of a transient phase is observed during the formation of δ-Ni2Si; transient phases grow and disappear during the growth of another phase. A possible mechanism is proposed for the transient phase formation and consumption. It is applied to the growth and consumption of θ-Ni2Si. A good accordance is found between the proposed model and in situ measurement of the kinetics of phase formation obtained by x-ray diffraction and differential scanning calorimetry for higher thickness.

scholarly journals Pengaruh Bentonit terhadap Pembentukan Fasa Polimorf dan Sifat Termal Membran Hibrida Poliviniliden Fluorida/Bentonit

2021 ◽  
Vol 17 (2) ◽  
pp. 177
Author(s):  
Edi Pramono ◽  
Rosid Eka Mustofa ◽  
Ozi Adi Saputra ◽  
Yulianto Adi Nugroho ◽  
Deana Wahyunigrum ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Fourier Transform ◽  
Thermal Properties ◽  
Phase Formation ◽  
Attenuated Total Reflectance ◽  
Hybrid Membranes ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Total Reflectance ◽  
X Ray

<p>Kajian struktur dan degradasi termal pada membran hibrida poliviniliden fluorida (PVDF)/lempung bentonit (BNT) telah dilakukan. Penelitian ini bertujuan mengetahui pengaruh penambahan BNT terhadap pembentukan fasa PVDF dan sifat termalnya. Membran hibrida PVDF/lempung BNT dibuat dengan metode inversi fasa. Membran yang dihasilkan dikarakterisasi dengan <em>attenuated total reflectance fourier transform infrared</em> (ATR-FTIR), <em>x-ray diffraction</em> (XRD), dan <em>differential scanning calorimetry</em> (DSC). Hasil penelitian menunjukkan membran PVDF/BNT memiliki struktur polimorf PVDF fasa α dan β yang terkonfirmasi dari data FTIR dan XRD. Data DSC menunjukkan penurunan nilai titik leleh (Tm) dengan penambahan BNT, dan dengan rentang suhu pelelehan yang lebih kecil. Kristalisasi PVDF terjadi secara isothermal dan adanya BNT menghasilkan titik kristalisasi (Tc) pada suhu yang lebih tinggi dibandingkan membran PVDF murni. Analisis termal dengan DSC memberikan informasi komprehensif pelelehan dan kristalisasi dari polimorf PVDF pada matriks membran.</p><p id="docs-internal-guid-c92edf53-7fff-cf03-76f3-f207f37c74f5" style="line-height: 1.2; text-align: justify; margin-top: 6pt; margin-bottom: 6pt;" dir="ltr"><strong>Effect of Bentonite toward Polymorph Phase Formation and Thermal Properties of Polyvinylidene Fluoride/Bentonite Hybrid Membranes. </strong>The study of the structure and thermal properties of PVDF/bentonite (BNT) hybrid membranes has been carried out. This study aims to determine the effect of BNT addition on the phase formation and thermal properties of the PVDF. In this study, PVDF/BNT hybrid membranes were prepared through the phase inversion method. The resulting membrane was characterized by Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR), x-ray diffraction (XRD), and differential scanning calorimetry (DSC). The results showed that the PVDF/BNT membrane has a PVDF polymorph structure with α and β phases confirmed by FTIR and XRD data. The DSC data showed that the addition of BNT decrease of the melting point (Tm) and with a smaller melting temperature range. PVDF polymorph crystallization occurs isothermally and the presence of BNT produces a crystallization point (Tc) at a higher temperature than pristine PVDF membrane. Thermal analysis with DSC provides comprehensive information on melting and crystallization of PVDF polymorphs in the membrane matrix.</p>

Amorphous and Crystalline Phase Formation in Ni/Al Multilayer Thin Films

1995 ◽  
Vol 398 ◽  
Author(s):  
G. Lucadamo ◽  
K. Barmak ◽  
C. Michaelsen
Keyword(s):  
Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Phase Formation ◽  
Deposition Process ◽  
Molar Ratio ◽  
Nucleation Kinetics ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
Sputter Deposited ◽  
Constant Heating

ABSTRACTWe have investigated reactive phase formation in magnetron sputter-deposited Ni/Al multilayer films with a 1:3 molar ratio and various periodicities ranging from 320 nm to a codeposited film with an effective periodicity of zero. The films were studied by x-ray diffraction, differential scanning calorimetry, electrical resistance measurements, and transmission electron microscopy. We find that a reaction which results in the formation of an amorphous phase has taken place during the multilayer deposition process. This reaction substantially reduces the driving force for subsequent reactions and explains why nucleation kinetics become important for these reactions. The mode of transformation for a film with 10 nm periodicity was investigated, in detail, by applying the Johnson-Mehl-Avrami analysis to data obtained from isothermal and constant heating rate differential scanning calorimetry, in combination with electron microscopy studies of the transformation microstructure.

Thermal Stability of N-Heterocycle-Stabilized Iodanes – A Systematic Investigation

2019 ◽  
Author(s):  
Andreas Boelke ◽  
Yulia A. Vlasenko ◽  
Mekhman S. Yusubov ◽  
Boris Nachtsheim ◽  
Pavel Postnikov
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Systematic Investigation ◽  
Scanning Calorimetry ◽  
Thermal Stability Of

<p>The thermal stability of pseudocyclic and cyclic <i>N</i>-heterocycle-stabilized (hydroxy)aryl- and mesityl(aryl)-l<sup>3</sup>-iodanes (NHIs) through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) is investigated. NHIs bearing <i>N</i>-heterocycles with a high N/C-ratio such as triazoles show among the lowest descomposition temperatures and the highest decomposition energies. A comparison of NHIs with known (pseudo)cyclic benziodoxolones is made and we further correlated their thermal stability with reactivity in a model oxygenation. </p>

Optimasi Proses Pembuatan dan Karakterisasi Fisik Niosom Sinkonin

2019 ◽  
Vol 16 (2) ◽  
pp. 178
Author(s):  
Hariyanti Hariyanti ◽  
Sophi Damayanti ◽  
Sasanti Tarini
Keyword(s):  
Differential Scanning Calorimetry ◽  
Particle Size ◽  
Hair Follicle ◽  
Scanning Calorimetry ◽  
Span 60

Sinkonin praktis tidak larut dalam air, sedikit larut dalam kloroform dan alkohol. Hal ini berdampak pada rendahnya penetrasi transfollicular sinkonin, karena hanya bahan aktif hidrofilik yang mampu melewati hair follicle. Dengan demikian dibutuhkan satu sistem penghantaran yang mampu menurunkan hidrofobisitas sinkonin untuk meningkatkan penetrasi sinkonin ke follicle. Niosom merupakan vesikel ampifilik dengan struktur lapisan rangkap yang terbentuk dari hidrasi kombinasi surfaktan nonionik dan kolesterol yang mampu menurunkan hidrofobisitas sinkonin. Penelitian ini bertujuan untuk menentukan proses pembuatan niosom sinkonin yang optimum. Pembuatan niosom sinkonin diawali dengan menentukan temperatur gelasi (Tg) dari span 60 dengan Differential Scanning Calorimetry (DSC), kemudian dilanjutkan dengan optimasi proses meliputi: optimasi kecepatan rotavapor pembentukan film lapis tipis, temperatur hidrasi, kecepatan rotavapor hidrasi, waktu hidrasi, dan waktu sonikasi. Karakteristik vesikel niosom yang optimal meliputi: ukuran partikel dan indeks polidispersitas dengan menggunakan Particle Size Analized (PSA) serta efisiensi penjeratan sinkonin dengan menggunakan KCKT. Temperatur gelasi (Tg) span 60 45±2 oC, kecepatan rotavapor pembentukan film lapis tipis niosom 210 rpm, temperatur hidrasi 55±2 oC, kecepatan rotavapor hidrasi 210 rpm, waktu hidrasi 20 menit, waktu sonikasi suspensi niosom 1 menit. Ukuran vesikel yang diperoleh adalah 100–200 nm, indeks polidispersitas 0,2–0,4 dan efisiensi penjeratan niosom sinkonin 84,49±0,0025%. Proses pembuatan niosom sinkonin memiliki pengaruh besar terhadap hasil ukuran vesikel dan efisiensi penjeratan niosom sinkonin.

Improving Wire Sweep Performance by Measuring Degree of Cure of Epoxy Mold Compounds

2011 ◽  
Author(s):  
Sheila Liza B. Dal
Keyword(s):  
Differential Scanning Calorimetry ◽  
Shelf Life ◽  
Trial And Error ◽  
Active Components ◽  
Scanning Calorimetry ◽  
Degree Of Cure ◽  
Electronic Package ◽  
Viscosity Changes ◽  
Epoxy Mold Compounds

Abstract The choice of epoxy mold compound (EMC) for an electronic package is based mostly on how much protection it provides to the active components in the package. But the choice is not a straightforward process. Rather it is mostly trial and error using different assembly parameters to find the most robust material while assembly defects are monitored. One such defect associated to EMC processing is wire sweep, and many studies have shown that it is mainly caused by viscosity changes in the EMC. In this study, samples of EMC in various stages of shelf life and staging times were analyzed for degree of cure using a method called differential scanning calorimetry (DSC). Samples are then processed at assembly for wire sweep measurement. It was found out that degree of cure increases with staging time at different rates for each shelf life. It was also found out that wire sweep did not only increase with degree of cure but it was also found to be predictable with respect to the latter. Using this information, the age and staging limit for each material was identified that would not cause wire sweep issues.

Sign in / Sign up

Export Citation Format

Share Document