scholarly journals Comprehensive Dutch market data analysis shows that e-liquids with nicotine salts have both higher nicotine and flavour concentrations than those with free-base nicotine

2022 ◽  
pp. tobaccocontrol-2021-056952
Author(s):  
Jeroen L A Pennings ◽  
Anne Havermans ◽  
Charlotte G G M Pauwels ◽  
Erna J Z Krüsemann ◽  
Wouter F Visser ◽  
...  

ObjectivesRecent years have seen an increase in e-liquids containing nicotine salts. Nicotine salts are less harsh and bitter than free-base nicotine and therefore can facilitate inhalation. Because inhalation-facilitating ingredients are banned in the European Union, we assessed the occurrence and characteristics of nicotine salt-containing e-liquids notified for the Netherlands.MethodsWe analysed data for 39 030 products, submitted by manufacturers in the European Union Common Entry Gate system, as extracted on 30 June 2020.ResultsNicotine salts were present in 13% of e-liquids, especially in pod-related e-liquids (73%) and e-liquids registered from 2018 onwards (over 25%). We found six nicotine salt ingredients (NSIs): nicotine lactate, salicylate, benzoate, levulinate, ditartrate and malate. Nicotine salts also occurred as nicotine–organic acid ingredient combination (NAIC), like nicotine and benzoic acid. Nicotine concentrations were twofold higher in e-liquids with NSI (median 14 mg/mL) and NAIC (11 mg/mL) than for free-base nicotine (6 mg/mL). E-liquids with NSI contained a fourfold higher number (median n=17) and concentration (median 31.0 mg/mL) of flavour ingredients than e-liquids with free-base nicotine (n=4, 7.4 mg/mL). In NAIC-containing e-liquids, these were threefold higher (n=12, 21.5 mg/mL). E-liquids with nicotine salts were less often tobacco flavoured but more often had fruity or sweet flavours.ConclusionsA substantial and increasing share of e-liquids in the Netherlands contains nicotine salts. Their characteristics can make such e-liquids more addictive and more attractive, especially to young and beginning users. Policymakers are advised to consider regulating products containing nicotine salts.

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Emile Tompa ◽  
Amirabbas Mofidi ◽  
Swenneke van den Heuvel ◽  
Thijmen van Bree ◽  
Frithjof Michaelsen ◽  
...  

Abstract Background Estimates of the economic burden of work injuries and diseases can help policymakers prioritize occupational health and safety policies and interventions in order to best allocate scarce resources. Several attempts have been made to estimate these economic burdens at the national level, but most have not included a comprehensive list of cost components, and none have attempted to implement a standard approach across several countries. The aim of our study is to develop a framework for estimating the economic burden of work injuries and diseases and implement it for selected European Union countries. Methods We develop an incidence cost framework using a bottom-up approach to estimate the societal burden of work injuries and diseases and implement it for five European Union countries. Three broad categories of costs are considered—direct healthcare, indirect productivity and intangible health-related quality of life costs. We begin with data on newly diagnosed work injuries and diseases from calendar year 2015. We consider lifetime costs for cases across all categories and incurred by all stakeholders. Sensitivity analysis is undertaken for key parameters. Results Indirect costs are the largest part of the economic burden, then direct costs and intangible costs. As a percentage of GDP, the highest overall costs are for Poland (10.4%), then Italy (6.7%), The Netherlands (3.6%), Germany (3.3%) and Finland (2.7%). The Netherlands has the highest per case costs (€75,342), then Italy (€58,411), Germany (€44,919), Finland (€43,069) and Poland (€38,918). Costs per working-age population are highest for Italy (€4956), then The Netherlands (€2930), Poland (€2793), Germany (€2527) and Finland (€2331). Conclusions Our framework serves as a template for estimating the economic burden of work injuries and diseases across countries in the European Union and elsewhere. Results can assist policymakers with identifying health and safety priority areas based on the magnitude of components, particularly when stratified by key characteristics such as industry, injury/disease, age and sex. Case costing can serve as an input into the economic evaluation of prevention initiatives. Comparisons across countries provide insights into the relevant performance of health and safety systems.


2013 ◽  
Vol 21 (3) ◽  
pp. 394-399
Author(s):  
Pieter Emmer

In spite of the fact that negotiations have been going on for years, the chances that Turkey will eventually become a full member of the European Union are slim. At present, a political majority among the EU-member states headed by Germany seems to oppose Turkey entering the EU. In the Netherlands, however, most political parties are still in favour of Turkey's membership. That difference coincides with the difference in the position of Turkish immigrants in German and Dutch societies.


2019 ◽  
Vol 58 (5) ◽  
pp. 1101-1113
Author(s):  
Jawad Ahmad

On March 6, 2018, the Court of Justice of the European Union (CJEU) found in Slowakische Republik (Slovak Republic) v. Achmea B.V. that the arbitration agreement contained in the 1991 Agreement on Encouragement and Reciprocal Protection of Investments between the Kingdom of the Netherlands and the Czech and Slovak Federative Republic (BIT) had an adverse effect on the autonomy of EU law and, thus, was incompatible with EU law. This important decision has ignited a debate on the compatibility of other arbitration agreements in both intra-EU bilateral investment treaties (intra-EU BITs) and in the Energy Charter Treaty (ECT) with EU law.


2017 ◽  
Vol 17(32) (2) ◽  
pp. 166-175
Author(s):  
Anna Olszańska

The so-called "big enlargement" of the European Union in 2004 triggered many changes in the functioning of individual agricultural markets. They concerned agricultural producers, processors and distributors from new but also old members of the EU. The aim of the study is to analyze changes in volume and structure in pig production in EU with particular focus on changes in the position of countries which joined the EU after 2004. The analysis covered the years 2005-2016. Statistical materials from Eurostat database were used. The basic statistical methods of data analysis were used in the study. In the analyzed years, with the general trend of pork production growth in the EU, there have been significant changes in its size in individual countries. There has been a significant increase in production in so-called old EU countries. The main beneficiaries of the in the pork market in the EU area were livestock producers and processors from Germany and Spain. In the countries which joined the EU after 2004, there has generally been a downward trend in volume of production, with the largest declines in most countries observed in 2009.


2019 ◽  
Vol 52 ◽  
pp. 119-133
Author(s):  
Ariadna H. Ochnio

The scope of extended confiscation is determined, inter alia, by the choice of triggering offences in Directive 2014/42/EU of the European Parliament and of the Council of 3 April 2014 on the freezing and confiscation of instrumentalities and proceeds of crime in the European Union. The question arises whether EU law guarantees appropriate limits of extended confiscation considering its specificity and the growing range of application in national legal orders. The study compared the normative framework of extended confiscation adopted in the criminal law of Poland, Romania, Germany, Austria, France, Spain, Finland, the Netherlands, and England and Wales. The list of offences, relevant for the scope of extended confiscation, is to be assessed by the Commission by 4 October 2019. The conclusions of the study concern the need to introduce, at the level of EU law, adequate safeguards against the disproportionate application of extended confiscation.


2011 ◽  
pp. 1354-1363
Author(s):  
Hans de Bruijn ◽  
Marieke Koopmans-van Berlo

In recent years, there has been a significant rise in “e-enforcement.” E-enforcement is the use of electronic tools in law enforcement. In this article, we consider two new forms of e-enforcement which have recently been introduced in Europe. These are Weigh in Motion with Video (WIM-Vid) and the digital tachograph. WIM-Vid is a system involving sensors in the road and cameras in order to register overloading of heavy goods vehicles. WIM-Vid was developed and implemented in the Netherlands and is currently attracting international attention. The digital tachograph replaces the analogue tachograph in all heavy goods vehicles within the European Union. The machine registers drivers’ driving and rest times. In this article, we focus on the special position of the clients of e-enforcement, the regulatees. Although e-enforcement is a form of e-government or digital government, the position of the client is quite distinct. Many definitions describe e-government in terms of service delivery (Chen, 2002; Devadoss, Pan, & Huang, 2002; Finger & Pécaud, 2003; Hiller & Belanger, 2001; Ho, 2002; Moon, 2002). These descriptions feature the concept of customer focus (Devadoss et al., 2002; Finger & Pécaud, 2003; Ho, 2002). The purpose of e-government should be to satisfy these customers, whether they are ordinary citizens or parties in private sector (Finger & Pécaud, 2003). The clients of enforcement, however, are offenders or potential offenders. These clients are characterized by the fact that they do not want the service and generally exhibit uncooperative behaviour (Alford, 2002). They may, for example, actively evade the “service” of enforcement, or commit information fraud (Hawkins, 1984). In this article we will see what the distinct position of the clients of enforcement means for the effects of e-enforcement.


Author(s):  
Johana Chylíková

The aim of this chapter is to illustrate the application of the quasi-simplex model (QSM) for reliability estimation in longitudinal data and to employ it to obtain information about the reliability of the European Union—Survey on Income and Living Conditions (EU-SILC) data collected between 2012 and 2017. Reliability of two survey questions is analysed: one which asks respondents about the financial situation in their households, and one which requests information about respondents’ health. Employing the QSM on the two items resulted in 80 reliability estimates from 17 and 11 European countries, respectively. Results revealed statistically significant differences in reliability between post-communist Central and Eastern European (CEE) countries and the rest of Europe, and similar patterns of the size of reliability estimates were observed for both items. The highest reliability (i.e. reliability over 0.8) was observed in CEE countries such as Bulgaria, Romania, Czechia, Poland, and Hungary. The lowest reliability (i.e. reliability lower than 0.7) was observed for data from Sweden, Slovenia, Norway, Spain, Portugal, Austria, Italy, and the Netherlands. The remarkable variation in longitudinal reliability across culturally and historically different European regions is discussed both from substantive and methodological perspectives.


Sign in / Sign up

Export Citation Format

Share Document