scholarly journals Interpretation of uplift pipeline-soil interaction behaviour using acoustic emission measurements

2021 ◽  
Author(s):  
Alister Smith ◽  
Giorgio Barone ◽  
Rene Wackrow ◽  
Richard Stanley
Keyword(s):  
Acoustic Emission ◽  
Stress Level ◽  
Large Scale ◽  
Deformation Behaviour ◽  
Limit State ◽  
Ultimate Limit State ◽  
Ground Failure ◽  
Soil Failure ◽  
Uplift Resistance ◽  
Ultimate Limit

The objective of this study was to develop quantitative acoustic emission (AE) interpretation for uplift pipeline-soil interaction behaviour, enabling early warning of serviceability and ultimate limit state failures in the field. A series of large-scale uplift experiments was performed on a steel pipe in sand with different burial depths (i.e., stress levels), and varying rates of deformation were imposed. A suite of AE parameters was compared with the pipe force and displacement behaviour. Image-based deformation measurements were used to monitor the soil displacement field. AE generation was proportional to the imposed stress level and pipe displacement rate and related to the evolution of the pipe/soil failure mechanism. Relationships have been quantified between AE generation and stress level (R2 values of 0.99), and between AE generation rate and pipe velocity (R2 values ranging from 0.95 to 0.98), enabling interpretation of accelerating deformation behaviour that accompanies progressive ground failure processes. An example interpretation framework demonstrates how AE parameters can be used to identify the mobilisation of peak uplift resistance and quantify accelerating deformation behaviour during post-peak softening.

Fatigue and Ultimate Limit State of Grouted Tubular Joints

2002 ◽  
Author(s):  
Darren J. Morahan ◽  
Minaz Lalani
Keyword(s):  
Large Scale ◽  
Limit State ◽  
Cost Effective ◽  
Ultimate Limit State ◽  
Tubular Joints ◽  
Detail Design ◽  
Double Skin ◽  
Load Tests ◽  
Two Phases ◽  
Ultimate Limit

A joint industry project commenced in 1993 to develop a design manual for tubular joints, which are strengthened or repaired through chord grout filling. This project was carried out in two phases and was completed in the late 1990’s. The project comprised the conduct of over 200 SCF and ultimate load tests on large scale as-welded and grouted tubular joints. In addition to the testing programme, studies on offshore deployment were carried out to ensure that complete chord grout filling was achievable for all practical scenarios. The primary reason for carrying out this project is the industry-wide recognition that chord grout filling represents an extremely cost-effective and mechanically efficient method to strengthen or repair tubular joints. Further, it has been recognised that double-skin joints (e.g. pile through leg with annulus grout-filled) are often present in structures and the enhanced strength and fatigue characteristics as a result could be exploited to permit more efficient new platform designs or better estimation of joint performance for existing installations. Although API RP2A [1] and ISO [2] recommendations permit the use of grouted joints, little guidance is provided. The guidance that is provided is based on public domain data and engineering principles. This project was carried out to generate a substantial amount of new data/information, leading to the creation of a detail design manual for grouted joints [3,4].

Combined Reinforced Concrete Columns Strengthening with Steel Clipping and Concrete Surfacing

2021 ◽  
pp. 11-22
Author(s):  
Ю. Г. Москалькова ◽  
С. В. Данилов ◽  
В. А. Ржевуцкая
Keyword(s):  
Reinforced Concrete ◽  
Load Transfer ◽  
Limit State ◽  
Concrete Columns ◽  
Ultimate Limit State ◽  
Concrete Core ◽  
Reinforced Concrete Columns ◽  
Entire Height ◽  
Complex Structural ◽  
Ultimate Limit

Постановка задачи. Исследуется метод усиления железобетонных колонн устройством стальной обоймы с обетонированием, который позволяет восстанавливать эксплуатационные показатели колонн, имеющих значительные дефекты и повреждения. Предпосылкой настоящих исследований явилось предположение о том, что усиление стальной обоймой с обетонированием является эффективным способом повышения несущей способности железобетонных колонн, причем вариант приложения нагрузки - только на бетонное ядро или ко всему сечению - существенно на эффективность усиления не влияет. В связи с этим целью исследования является определение необходимости устройства стального оголовка и включения в работу ветвей стальной обоймы при условии обетонирования стержня колонны по всей высоте. Результаты и выводы. Рациональным признан способ передачи нагрузки только на бетонное ядро усиленных колонн, поскольку устройство оголовка стальной обоймы требует применения сложных конструктивно-технологических решений, но при этом дополнительно увеличивает несущую способность незначительно (согласно проведенным исследованиям менее чем на 10 %). Ввиду отсутствия необходимости устройства конструкций стального оголовка снижаются трудоемкость и сроки производства работ по усилению колонн. Statement of the problem. The method of strengthening reinforced concrete columns with a steel clipping and the concrete surfacing is investigated. This method allows one to repair the columns with significant defects and damage. The prerequisite for this study was the assumption of strengthening with a steel clipping and the concrete surfacing is an effective way to increase the ultimate limit state of reinforced concrete columns, furthermore, the option of applying the load (only to the concrete core or to the entire section) does not significantly affect the strengthening effectiveness. In this regard, the purpose of the investigation was to identify the need to include the steel jacketing in the work, on the condition the column is coated with concrete along with the entire height. Results and conclusions. The load transfer method only to the concrete core of the strengthened columns is recognized as rational since the device of the steel clipping head requires the use of complex structural and technological solutions, but at the same time additionally increases the ultimate limit state insignificantly (according to the studies by less than 10 %). Due to the absence of the need to establish structures of the steel jacketing head, the labor intensiveness and terms of work production on strengthening the columns are reduced.

Application potential of textile reinforcement in concrete construction for infrastructure buildings: environmental performance and availability

2021 ◽  
Author(s):  
Sara Reichenbach ◽  
Benjamin Kromoser ◽  
Philipp Preinstorfer ◽  
Tobias Huber
Keyword(s):  
High Performance ◽  
Construction Material ◽  
Limit State ◽  
Carbon Dioxide Emission ◽  
Resource Consumption ◽  
Ultimate Limit State ◽  
Textile Reinforced Concrete ◽  
Potential Applications ◽  
Application Potential ◽  
Ultimate Limit

<p>With the building industry being one of the main sources of carbon dioxide emission worldwide and concrete being the main construction material, new strategies have to be developed to reduce the carbon footprint thereof. The use of high-performance materials in structural concrete, as for example textile-reinforced concrete (TRC), seems to allow for a reduction of the resource consumption and the carbon emissions. The present paper addresses potential applications of TRC examining the global warming potential (GWP) of a rail platform barrier. The resource consumption is depicted in a parametrical study in terms of the necessary component height and reinforcement area considering both the serviceability limit state (SLS) as well as the ultimate limit state (ULS). The results clearly indicate an achievable reduction of the GWP during construction when using textile reinforcement made of high-performance fibres. Furthermore, an analysis of the European market was conducted to prove the availability of this new reinforcement type. </p>

Permafrost Thawing-Pipeline Interaction Advanced Finite Element Model

2009 ◽  
Author(s):  
Jianfeng Xu ◽  
Basel Abdalla ◽  
Ayman Eltaher ◽  
Paul Jukes
Keyword(s):  
Finite Element ◽  
Energy Demand ◽  
Large Scale ◽  
Limit State ◽  
The Arctic ◽  
Ultimate Limit State ◽  
Fe Model ◽  
Field Development ◽  
Thaw Settlement ◽  
Permafrost Thawing

The increasing energy demand has promoted the interest in exploration and field development in the Arctic waters, which holds one quarter of the world’s petroleum reserves. The harsh conditions and fragile environment in the arctic region introduce many challenges to a sustainable development of these resources. One of the key challenges is the engineering consideration of warm pipelines installed in permafrost areas; found mainly in shallow waters and shore crossings. Evaluations have to be made during the pipeline design to avoid significant thaw settlement and large-scale permafrost degrading. In this paper, a three-dimensional (3D) finite element (FE) model was developed to study the interaction between buried pipelines transporting warm hydrocarbons and the surrounding permafrost. This interaction is a combination of several mechanisms: heat transfer from the pipeline, results in permafrost thawing and formation of thaw bulb around the pipeline. Consequently, the thaw settlement of soil beneath the pipeline base results in bending strains in the pipe wall. For safe operations, the pipe should be designed so that the induced strains do not exceed the ultimate limit state conditions. The developed model helps in accurate prediction of pipe strains by using finite element continuum modeling method as opposed to the more commonly used discrete (springs) modeling and hand calculations. It also assesses the real size of the thaw bulb and the corresponding settlement at any time, thus preventing an over-conservative design.

Sign in / Sign up

Export Citation Format

Share Document