Geological and geochemical evidence for variable magmatism and tectonics in the southern Canadian Cordillera: Paleozoic to Jurassic suites, Greenwood, southern British Columbia

2001 ◽  
Vol 38 (1) ◽  
pp. 75-90 ◽  
Author(s):  
J Dostal ◽  
B N Church ◽  
T Hoy
Keyword(s):  
British Columbia ◽  
Middle Triassic ◽  
Volcanic Rocks ◽  
Sedimentary Rocks ◽  
Deep Ocean ◽  
Island Arc ◽  
Canadian Cordillera ◽  
South Central ◽  
Upper Paleozoic ◽  
Paleozoic Rocks

The Paleozoic and early Mesozoic rocks of the Greenwood mining camp in southern British Columbia are a part of the Quesnel terrane in the eastern part of the Intermontane Belt of the Canadian Cordillera. Upper Paleozoic rocks include the Knob Hill Group composed of oceanic tholeiitic basalts (with (La/Yb)n [Formula: see text] 0.4–1.2), associated with deep ocean sedimentary rocks and serpentinites; the Attwood Group that comprises island-arc tholeiites (with (La/Yb)n [Formula: see text] 1–4 and positive εNd values), clastic sedimentary rocks and limestones; and a unit of oceanic gabbros with (La/Yb)n < 0.5. These lithologically defined units occur as tectonically emplaced slivers of oceanic crust probably produced during the closure of the Slide Mountain basin during the Permian. They are unconformably overlain by Middle Triassic calc-alkaline volcanic and sedimentary rocks of the Brooklyn Group. The Brooklyn Group volcanic rocks have characteristics of mature island-arc rocks, including (La/Yb)n [Formula: see text] 2.5–4.5 and positive εNd values. The Paleozoic rocks are crosscut by a 200 million years old granodioritic intrusion containing zircon with an Early Proterozoic inheritance age (~2.4 Ga). By inference, southern Quesnellia may have been well offshore from the ancestral North American margin in the Mississippian, in close proximity to the margin by the Middle Triassic, and contiguous with it by the Early Jurassic. It is suggested that the complex tectonic history of extension and contraction of the southern Canadian Cordillera during the post Middle Jurassic can be extended in south-central British Columbia as far back as the upper Paleozoic.

Upper Paleozoic rocks of the western Canadian Cordillera and their bearing on Cordilleran evolution

1977 ◽  
Vol 14 (8) ◽  
pp. 1832-1859 ◽  
Author(s):  
J. W. H. Monger
Keyword(s):  
British Columbia ◽  
Pacific Ocean ◽  
Sedimentary Rocks ◽  
Ocean Floor ◽  
Canadian Cordillera ◽  
Island Arcs ◽  
South Central ◽  
Early Mesozoic ◽  
Basic Volcanics ◽  
Paleozoic Rocks

Volcanic and sedimentary successions of late Paleozoic and locally Mesozoic age in the Canadian Cordillera form six assemblages, based mainly on lithological association and similar stratigraphy. From east to west these assemblages are: (1) Eastern assemblage, located along the Omineca Crystalline Belt and consisting of Mississippian to Permian largely sedimentary rocks overlain by mainly Permian basic volcanics and ultramafics; (2) poorly known rocks in south-central British Columbia characterized by abundant volcaniclastics of Pennsylvanian and Permian ages; (3) Cache Creek – Bridge River assemblage of the Intermontane Bell, ranging from Lower Mississippian to Middle Jurassic and composed of chert, argillite, carbonate, basic volcanics, and ultramafics: (4) Stikine assemblage of northwestern and north-central British Columbia of Mississippian and Permian age, with basic to acidic volcanics, argillite, and carbonate; (5) Chilliwack Group on the west side of the Cascade Mountains, of Pennsylvanian and Permian age, with basic to acidic volcanics overlying a carbonate and clastic succession: and (6) Sicker–Skolai assemblage of Vancouver Island and the Saint Elias Mountains with basic to acidic volcanics overlain by sedimentary rocks. Coeval faunas in several of these assemblages differ. The assemblages may be largely unrelated to one another and came together in the Mesozoic, Their present distribution, with rocks typical of ocean basins (assemblages 1, 3) east of rocks that probably represent island arcs (assemblages, 2, 4, 5, 6) presents major problems. Two hypotheses attempt to explain this distribution. (1) The oceanic assemblages represent Paleozoic and early Mesozoic Pacific Ocean floor obducted over a broad arc terrane in the Jurassic, or (2) they are Paleozoic and early Mesozoic Pacific Ocean floor, trapped east of allochthonous arc terranes (assemblages 4, 5, 6) emplaced in the Mesozoic.

The Anvil aureole, an atypical mid-Cretaceous culmination in the northern Canadian Cordillera

1990 ◽  
Vol 27 (3) ◽  
pp. 344-356 ◽  
Author(s):  
J. M. Smith ◽  
P. Erdmer
Keyword(s):  
Country Rock ◽  
Regional Metamorphism ◽  
Volcanic Rocks ◽  
Canadian Cordillera ◽  
South Fork ◽  
Upper Proterozoic ◽  
Tectonic History ◽  
South Central ◽  
Upper Paleozoic ◽  
Peak Metamorphism

The mid-Cretaceous Anvil batholith, in south-central Yukon near Faro, intrudes Upper Proterozoic to upper Paleozoic strata of the Cordilleran outer miogeocline. From previous work, it was unclear whether biotite, andalusite–staurolite, and garnet isograds near the pluton resulted from pre-Devonian regional metamorphism and subsequent arching in a structural culmination or from mid-Cretaceous instrusion. The present study has documented biotite, andalusite, staurolite, garnet, and sillimanite isograds concentric to the pluton. Prophyroblast–matrix relationships indicate that peak metamorphism occurred during intrusion, which took place under approximately 3 kbar (300 MPa) pressure and heated country rock to temperatures of 600°–620 °C. The metamorphism is thus compatible with a deep, mid-Cretaceous event. Regional uplift of 10 km is implied by the metamorphic minerals. From cogenetic relationships between some phases of the Anvil batholith and the nearby South Fork volcanic rocks, regional uplift appears to have been completed in a few million years in the mid-Cretaceous. The uncharacteristic aureole suggests that mid-Cretaceous events in this region are atypical of the Cordillera and may reflect a unique tectonic history or position in the orogen.

Magmatic composition and tectonic setting of altered, volcanic rocks of the Fennell Formation, British Columbia

1984 ◽  
Vol 21 (7) ◽  
pp. 743-752 ◽  
Author(s):  
Pradeep K. Aggarwal ◽  
Toshitsugu Fujii ◽  
Bruce E. Nesbitt
Keyword(s):  
British Columbia ◽  
Marine Sediments ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Tholeiitic Basalt ◽  
Oceanic Islands ◽  
Mineral Deposit ◽  
South Central ◽  
Ti Oxides ◽  
Upper Paleozoic

The upper Paleozoic Fennell Formation in south-central British Columbia consists of basalts and associated marine sediments metamorphosed at low greenschist facies conditions. Although the microphenocrysts of plagioclase and Fe–Ti oxides are almost completely altered, those of augite and amphibole have survived this metamorphism. In the vicinity of the Chu Chua mineral deposit, relict augite microphenocrysts, which constitute a major proportion of the microphenocryst assemblage, are enriched in Al and Ti and are similar in composition to those from alkalic and transitional basalts. Relict amphiboles are also enriched in Ti (4.5–5.9% TiO2) and are classified as kaersutites. The occurrence of kaersutite and the chemistry of relict augites indicate that in this area the Fennell Formation basalts were originally alkalic and transitional in composition. On conventional Ti–(Zr/P2O5) and (Nb/Y)–(Zr/P2O5) immobile-element discrimination diagrams, both the kaersutite-bearing and kaersutite-free rocks plot in the tholeiitic basalt field. Accordingly, it is suggested that these diagrams may not provide clear evidence for the magmatic composition of altered volcanic rocks.Based on the lead isotopic compositions, petrographic features, and alkalic character of the Fennell Formation basalts, it is interpreted that these basalts were formed in a tectonic setting similar to that of present-day oceanic islands or seamounts.

Evolution of the south-central segment of the Archean Abitibi Belt, Quebec. Part II: Tectonic evolution and geomechanical model

1983 ◽  
Vol 20 (9) ◽  
pp. 1355-1373 ◽  
Author(s):  
Erich Dimroth ◽  
Lazlo Imreh ◽  
Normand Goulet ◽  
Michel Rocheleau
Keyword(s):  
Tectonic Evolution ◽  
Anisotropic Plate ◽  
Volcanic Rocks ◽  
Sedimentary Rocks ◽  
Normal Fault ◽  
Geomechanical Model ◽  
Southwestern Part ◽  
South Central ◽  
Central Segment ◽  
Volcanic Terrain

In this paper, we describe the relations between the paleogeographic and tectonic evolution of the southwestern part of the Archean Abitibi and Bellecombe belts. Volcanism in the Abitibi Belt created a very thick, anisotropic plate composed of competent volcanic rocks and broken by the Duparquet–Destor break. The depocenters of the upper division of diverse volcanic rocks subsided about 10 km relative to their surroundings, and some central volcanic complexes within this division were consolidated by synvolcanic plutons and their thermal metamorphic aureole. The Cadillac break, a normal fault, separated the Abitibi and Bellecombe belts. The latter consisted of comparatively incompetent sedimentary rocks on top of a basement composed of ultramafic–mafic flows.North–south compression of the volcanic terrain during the Kenoran Orogeny produced a set of flexure folds, F1, that curve around the consolidated cores of central volcanic complexes generally in an easterly direction. Synclinoria nucleated at the deeply subsident depocenters of the upper diverse division. Further north–south flattening and subvertical stretching produced the east-trending F2 folds, their axial-plane schistosity S2, and local superposed schistosities S3 and S4. Southward verging recumbent folds suggest that the Bellecombe Belt simultaneously was pulled northward below the Abitibi Belt. During the orogeny, the Duparquet–Destor and Cadillac breaks were transformed to thrust faults; the Duparquet–Destor break also shows minor (< 3 km) right-lateral strike slip. Diapiric rise of late- to post-kinematic plutons locally distorted earlier schistosities.

The Blind Creek Limestone, Keremeos, British Columbia: Structure and Regional Tectonic Significance

1975 ◽  
Vol 12 (11) ◽  
pp. 1929-1933
Author(s):  
W. C. Barnes ◽  
J. V. Ross
Keyword(s):  
British Columbia ◽  
Compressive Stress ◽  
Ductile Deformation ◽  
Large Block ◽  
Stress Direction ◽  
Upper Paleozoic ◽  
Tectonic Significance ◽  
Regional Tectonic ◽  
Similar Body ◽  
Paleozoic Rocks

A large block of Upper Paleozoic limestone at Blind Creek near Keremeos, B.C. was emplaced by dry gravity sliding, probably associated with uplift related to nearby Eocene volcanism. The block is a nearly flat tabular unit, exposed over an area of 650 m by 1300 m, and is separated from underlying chaotic breccias derived from adjacent Paleozoic rocks and from Eocene volcanic flow rocks by a sole fault. The block comprises two lithologically and tectonically distinct units, a lower imbricated unit consisting of several slices repeating the same sequence of strata, separated from an upper unit of massive limestone by a low-angle fault. Within the imbricated unit, early faults emanate from lenticular masses of breccia along the sole, become increasingly steeper upward, and are truncated above by the upper low angle fault. Associated minor folds and fractures have a clockwise sense of rotation. Later fractures and associated minor folds have the opposite dip and sense of rotation. These two subsets comprise a conjugate set whose inferred compressive stress direction coincides with the present overall dip direction of the entire mass.The northwesterly adjacent autochthonous Olalla limestone, or a similar body now buried by younger units, is a likely source for the Blind Creek allochthon.Absence of any structures within the limestone indicative of ductile deformation contrasts markedly with those of the highly deformed rocks of the Old Tom and Shoemaker Formations, the Kobau Group, and the nearby gneisses of the western Shuswap Complex.

Crustal velocity structure of the southern Nechako basin, British Columbia, from wide-angle seismic traveltime inversion1This article is one of a series of papers published in this Special Issue on the theme of New insights in Cordilleran Intermontane geoscience: reducing exploration risk in the mountain pine beetle-affected area, British Columbia.

2011 ◽  
Vol 48 (6) ◽  
pp. 1050-1063 ◽  
Author(s):  
A.L. Stephenson ◽  
G.D. Spence ◽  
K. Wang ◽  
J.A. Hole ◽  
K.C. Miller ◽  
...  
Keyword(s):  
British Columbia ◽  
Mountain Pine Beetle ◽  
Velocity Structure ◽  
Volcanic Rocks ◽  
Sedimentary Rocks ◽  
Velocity Model ◽  
Seismic Profile ◽  
Wide Angle ◽  
Seismic Velocities ◽  
Coast Mountains

In the BATHOLITHSonland seismic project, a refraction – wide-angle reflection survey was shot in 2009 across the Coast Mountains and Interior Plateau of central British Columbia. Part of the seismic profile crossed the Nechako Basin, a Jurassic–Cretaceous basin with potential for hydrocarbons within sedimentary strata that underlies widespread volcanic rocks. Along this 205 km-long line segment, eight large explosive shots were fired into 980 seismometers. Forward and inverse modelling of the traveltime data were conducted with two independent methods: ray-tracing based modelling of first and secondary arrivals, and a higher resolution wavefront-based first-arrival seismic tomography. Material with velocities less than 5.0 km/s is interpreted as sedimentary rocks of the Nechako Basin, while velocities from 5.0–6.0 km/s may correspond to interlayered sedimentary and volcanic rocks. The greatest thickness of sedimentary rocks in the basin is found in the central 110 km of the profile. Two sub-basins were identified in this region, with widths of 20–50 km and maximum sedimentary depths of 2.5 and 3.3 km. Such features are well-defined in the velocity model, since resolution tests indicate that features with widths greater than ∼13 km are reliable. Beneath the sedimentary rocks, seismic velocities increase more slowly with depth — from 6.0 km/s just below the basin to 6.3 km/s at ∼17 km in depth, and then to 6.8–7.0 km/s at the base of the crust. The Moho is found at a depth of 33.5–35 km beneath the profile, and mantle velocities are high at 8.05–8.10 km/s.

Evidence for "Caribooan Orogeny" in the Southern Okanagan Region of British Columbia

1972 ◽  
Vol 9 (12) ◽  
pp. 1693-1702
Author(s):  
John V. Ross ◽  
William C. Barnes
Keyword(s):  
British Columbia ◽  
Sedimentary Rocks ◽  
Late Paleozoic ◽  
Deformational History ◽  
Exposed Part ◽  
Strong Deformation ◽  
Paleozoic Rocks ◽  
Okanagan Valley

A sequence of non-metamorphosed, little deformed, fossiliferous, sedimentary rocks, near Keremeos, southern British Columbia, unconformably overlies rocks having a history similar to that of the Vaseaux Formation, the most westerly exposed part of the Shuswap Complex of the southern Okanagan Valley. Fossils from the younger sequence have a late Mississippian – early Pennsylvanian age.This part of the southern Okanagan region has a deformational history that is pre-mid-Carboniferous and likely related to the Caribooan orogeny. This is in contrast to Late Paleozoic rocks at northern Okanagan localities and elsewhere in British Columbia that have under-gone strong deformation of probably Mesozoic age.

Lithogeochemistry of volcano-plutonic assemblages of the southern Hanson Lake Block and southeastern Glennie Domain, Trans-Hudson Orogen: evidence for a single island arc complex

1999 ◽  
Vol 36 (2) ◽  
pp. 209-225 ◽  
Author(s):  
Ralf O Maxeiner ◽  
Tom II Sibbald ◽  
William L Slimmon ◽  
Larry M Heaman ◽  
Brian R Watters
Keyword(s):  
Volcanic Rocks ◽  
Volcanic Belt ◽  
Oceanic Island ◽  
Island Arc ◽  
Island Arcs ◽  
Calc Alkaline ◽  
East Central ◽  
South Central ◽  
Volcaniclastic Rocks ◽  
Flin Flon

This paper describes the geology, geochemistry, and age of two amphibolite facies volcano-plutonic assemblages in the southern Hanson Lake Block and southeastern Glennie Domain of the Paleoproterozoic Trans-Hudson Orogen of east-central Saskatchewan. The Hanson Lake assemblage comprises a mixed suite of subaqueous to subaerial dacitic to rhyolitic (ca. 1875 Ma) and intercalated minor mafic volcanic rocks, overlain by greywackes. Similarly with modern oceanic island arcs, the Hanson Lake assemblage shows evolution from primitive arc tholeiites to evolved calc-alkaline arc rocks. It is intruded by younger subvolcanic alkaline porphyries (ca. 1861 Ma), synvolcanic granitic plutons (ca. 1873 Ma), and the younger Hanson Lake Pluton (ca. 1844 Ma). Rocks of the Northern Lights assemblage are stratigraphically equivalent to the lower portion of the Hanson Lake assemblage and comprise tholeiitic arc pillowed mafic flows and felsic to intermediate volcaniclastic rocks and greywackes, which can be traced as far west as Wapawekka Lake in the south-central part of the Glennie Domain. The Hanson Lake volcanic belt, comprising the Northern Lights and Hanson Lake assemblages, shows strong lithological, geochemical, and geochronological similarities to lithotectonic assemblages of the Flin Flon Domain (Amisk Collage), suggesting that all of these areas may have been part of a more or less continuous island arc complex, extending from Snow Lake to Flin Flon, across the Sturgeon-Weir shear zone into the Hanson Lake Block and across the Tabbernor fault zone into the Glennie Domain.

Sign in / Sign up

Export Citation Format

Share Document