40Ar/39Ar thermochronometric constraints on the tectonic evolution of the Clachnacudainn complex, southeastern British Columbia

1999 ◽  
Vol 36 (12) ◽  
pp. 1989-2006 ◽  
Author(s):  
Maurice Colpron ◽  
Raymond A Price ◽  
Douglas A Archibald
Keyword(s):  
British Columbia ◽  
Late Cretaceous ◽  
Tectonic Evolution ◽  
Thermal Evolution ◽  
Hanging Wall ◽  
Closure Temperature ◽  
Widespread Distribution ◽  
Early Tertiary ◽  
Intrusive Rocks ◽  
Structural Levels

40Ar/39Ar thermochronometry from the Clachnacudainn complex indicates that the thermal evolution of the complex was controlled primarily by the intrusion of granitoid plutons in mid- and Late Cretaceous times. Hornblendes from the eastern part of the complex cooled below their Ar closure temperature (ca. 500°C) shortly after intrusion of the mid-Cretaceous plutons; those from the western part of the complex have latest Cretaceous cooling dates, indicating cooling of these hornblendes after intrusion of the leucogranite plutons at ca. 71 Ma. Micas from the southern Clachnacudainn complex exhibit a pattern of progressive cooling toward lower structural levels, where Late Cretaceous and younger intrusions occur. The occurrence of Late Cretaceous - Paleocene mica cooling dates in both the hanging wall and footwall of the Standfast Creek fault refutes the hypothesis that there has been significant Tertiary extensional exhumation of the Clachnacudainn complex along the Standfast Creek fault. Furthermore, the widespread distribution of Late Cretaceous - Paleocene mica cooling ages suggests that an important volume of Late Cretaceous - early Tertiary intrusive rocks must be present in the subsurface beneath the Clachnacudainn complex.

Late Cretaceous and early Tertiary plutonism and deformation in the Skagit Gneiss Complex, North Cascade Range, Washington and British Columbia

1991 ◽  
Vol 103 (10) ◽  
pp. 1297-1307 ◽  
Author(s):  
RALPH A. HAUGERUD ◽  
PETER VAN DER HEYDEN ◽  
ROWLAND W. TABOR ◽  
JOHN S. STACEY ◽  
ROBERT E. ZARTMAN
Keyword(s):  
British Columbia ◽  
Late Cretaceous ◽  
Cascade Range ◽  
Gneiss Complex ◽  
Early Tertiary

scholarly journals Seismic stratigraphy and tectonic evolution of the Lower Cretaceous in the Danish Central Trough

1986 ◽  
Vol 11 ◽  
pp. 1-46
Author(s):  
Ole Valdemar Vejbæk
Keyword(s):  
Late Cretaceous ◽  
Lower Cretaceous ◽  
Tectonic Evolution ◽  
Tectonic Activity ◽  
Weak Inversion ◽  
Stratigraphic Analysis ◽  
New Name ◽  
Early Tertiary ◽  
Central Trough ◽  
Block Faulting

The Lower Cretaceous sequence of the Danish Central Trough has been studied by the use of seismic stratigraphic analysis. The sequence has been subdivided into 6 seismic stratigraphic units named LCA, LCB, LCC, LCD, LCE and LCF. The studied area includes the Feda Graben, the Gertrud Graben (new name), the Tail End Graben, the Arne-Elin Graben (new name) and the Salt Dome Province, whereas the Grensen Nose and the Outer Rough Basin are not included. These basins are separated by the Inge High, the Mads High, the Gert Ridge (new name), the Manda! High, the Heno Plateau (new name) and the Pollerne Ridge (new name). The fault controlled subsidence of the Lower Cretaceous basins is claimed to have been governed by left lateral transtensional wrenching. This wrenching gradually ceased and gave way to regional subsidence with intermittent events of inversion resulting from right lateral transpressive wrenching in the Late Cretaceous and Early Tertiary. The first weak inversion is shown to have occurred in the Late Hauterivian. Sedimentation was influenced by a general gradual relative rise in sea-level starting with a low in the Volgian - Early Ryazanian times coeval with the deposition of the Farsund Formation and culminating in the Late Cretaceous. At the beginning of the Early Cretaceous gravity flow became an important depositional mechanism and resulted in preferred deposition in topographical lows, which were generated by simple tensional block-faulting or by wrench-induced, rapid local subsidence. As tectonic activity decreased and the elastic source areas became more remote and worn down, depocentres became less pronounced, especially with the last unit of the Lower Cretaceous.

P–T history and kinematics of the Monashee Décollement near Revelstoke, British Columbia

1989 ◽  
Vol 26 (2) ◽  
pp. 231-243 ◽  
Author(s):  
Larry S. Lane ◽  
Edward D. Ghent ◽  
Mavis Z. Stout ◽  
Richard L. Brown
Keyword(s):  
British Columbia ◽  
Shear Band ◽  
Late Cretaceous ◽  
Hanging Wall ◽  
Multiple Criteria ◽  
Early Eocene ◽  
Kinematic Indicators ◽  
Metamorphic Assemblage ◽  
Monashee Complex

Microstructural and petrofabric analyses of mylonites from the Monashee Décollement demonstrate that the hanging wall was displaced eastward over the footwall. Microstructural kinematic indicators include shear-band foliation, asymmetric strain shadows, and S–C fabrics. Quartz c axes locally exhibit asymmetric fabrics that are consistent with the microstructural evidence for sense of shear. The kinematic evidence is reliable because multiple criteria coexist within individual specimens.Metamorphic assemblages from footwall Monashee Complex pelites at the Revelstoke damsite indicate that the peak metamorphic assemblage was sillimanite–K-feldspar–biotite–almandine–quartz ± plagioclase. Biotite–garnet geothermometry and garnet–plagioclase–sillimanite–quartz geobarometry set broad constraints on metamorphic temperatures but closer constraints on pressures, near 650 °C and 630 MPa.Comparison of these data with Late Cretaceous hornblende cooling ages from the same locality indicates that the metamorphism is at least as old as Late Cretaceous. Complex microstructures relating to repeated mylonitization and annealing render difficult the correlation of metamorphic conditions with mylonitic fabrics. Early mylonitic textures predate the metamorphic equilibration and thus are pre-Late Cretaceous in age. Postmetamorphic mylonites are well preserved, but their ages are poorly constrained. The present interpretation favours a Late Cretaceous to Paleocene age relating to compressional tectonics. However, an Early Eocene age relating to extensional shearing cannot be excluded.

A Cretaceous Neo-Tethyan carbonate margin in Argolis, southern Greece

1990 ◽  
Vol 127 (4) ◽  
pp. 299-308 ◽  
Author(s):  
Peter D. Clift ◽  
Alastair H. F. Robertson
Keyword(s):  
Late Cretaceous ◽  
Foreland Basin ◽  
Ocean Basin ◽  
Passive Margin ◽  
Accretionary Complex ◽  
Early Tertiary ◽  
Thrust Sheets ◽  
Pelagonian Zone ◽  
Structural Levels ◽  
Southern Greece

AbstractThe Argolis Peninsula, southern Greece, is believed to form part of a Pelagonian microcontinent located between two oceanic basins, the Pindos to the west and theVardar to the east, in Triassic to Tertiary time. In eastern Argolis, two important units are exposed: (i) the Ermioni Limestones cropping out in the southwest; (ii) the Poros Formation, observed on an offshore island in the northeast, and on the adjacent mainland. Both these units comprise late Cretaceous (Aptian-Maastrichtian) pelagic limestones, calciturbidites, lenticular matrix- and clast-supported limestone conglomerates and slump sheets. However, the Poros Formation is distinguished from the Ermioni Limestones by the presence of bituminous micritic limestones and an increasing proportion of shale up sequence. These successions are deep-water slope carbonates that once formed the southeast-facing passive margin of the Pelagonian platform (Akros Limestone). Beyond this lay a late Cretaceous ocean basin in the Vardar Zone. This ocean was consumed in an easterly-dipping subduction zone in latest Cretaceous (?) to early Tertiary time, giving rise to an accretionary complex (Ermioni Complex). During early Tertiary (Palaeocene-Eocene) time the passive continental margin (Pelagonian Zone) collided with the trench and accretionary complex to the east. As the suture tightened, former lower-slope carbonates (Ermioni Limestones) were accreted to the base of the over-riding thrust sheets and emplaced onto the platform. Farther west, bituminous upper slope carbonates (Poros Formation) flexurally subsided and passed transitionally upwards into calcareous flysch and olistostromes in a foreland basin. These sediments were then overridden by the emplacing thrust stack and themselves underplated. Late-stage high-angle faulting then disrupted the tectonostratigraphy, in places juxtaposing relatively high and low structural levels of the complex.

Cretaceous sedimentation and tectonics, Tyaughton–Methow Basin, southwestern British Columbia

1985 ◽  
Vol 22 (2) ◽  
pp. 154-174 ◽  
Author(s):  
Karen L. Kleinspehn
Keyword(s):  
British Columbia ◽  
Early Cretaceous ◽  
Late Cretaceous ◽  
Strike Slip ◽  
Dispersal Patterns ◽  
Western Margin ◽  
Early Tertiary ◽  
Active Intermediate ◽  
Major Strike ◽  
Fault Displacement

The Mesozoic Tyaughton–Methow Basin straddles the Fraser–Yalakom–Pasayten – Straight Creek (FYPSC) strike-slip fault zone between six tectono-stratigraphic terranes in southwestern British Columbia. Data from Hauterivian–Cenomanian basin fill provide constraints for reconstruction of fault displacement and paleogeography.The Early Cretaceous eastern margin of the basin was a region of uplifted Jurassic plutons and active intermediate volcanism. Detritus shed southwestward from that margin was deposited as the marine Jackass Mountain Group. Albian inner to mid-fan facies of the Jackass Mountain Group can be correlated across the Yalakom Fault, suggesting 150 ± 25 km of post- Albian dextral offset. Deposits of the Jackass Mountain Group overlap the major strike- slip zone (FYPSC). If that zone represents the eastern boundary of the tectono-stratigraphic terrane, Wrangellia, then accretion of Wrangellia to terranes to the east occurred before late Early Cretaceous time.The western margin of the basin first became prominent with Cenomanian uplift of the Coast Mountain suprastructure. Uplift is recorded by dispersal patterns of the volcaniclastic Kingsvale Group southwest of the Yalakom Fault.Reversing 110 km of Late Cretaceous – early Tertiary dextral motion on the Fraser – Straight Creek Fault followed by 150 km of Cenomanian – Turonian motion on the Yalakom – Ross Lake Fault restores the basin to a reasonable depositional configuration.

scholarly journals Evolution of the Late Cretaceous Nanaimo Basin, British Columbia, Canada: Definitive provenance links to northern latitudes

Geosphere ◽  
2021 ◽  
Author(s):  
J. Brian Mahoney ◽  
James W. Haggart ◽  
Marty Grove ◽  
David L. Kimbrough ◽  
Virginia Isava ◽  
...  
Keyword(s):  
United States ◽  
British Columbia ◽  
Late Cretaceous ◽  
Detrital Zircon ◽  
Tectonic Evolution ◽  
Sediment Supply ◽  
Local Source ◽  
Southern Coast ◽  
Coast Mountains ◽  
Belt Supergroup

Accurate reconstruction of the Late Cretaceous paleogeography and tectonic evolution of the west- ern North American Cordilleran margin is required to resolve the long-standing debate over proposed large-scale, orogen-parallel terrane translation. The Nanaimo Basin (British Columbia, Canada) contains a high-fidelity record of orogenic exhumation and basin subsidence in the southwestern Canadian Cordillera that constrains the tectonic evolution of the region. Integration of detrital zircon U-Pb geochronology, conglomerate clast U-Pb geochronology, detrital muscovite 40Ar/39Ar thermochronology, and Lu-Hf isotopic analysis of detrital zircon defines a multidisciplinary provenance signature that provides a definitive linkage with sediment source regions north of the Sierra Nevada arc system (western United States). Analysis of spatial and temporal provenance variations within Nanaimo Group strata documents a bimodal sediment supply with a local source derived from the adjacent magmatic arc in the southern Coast Mountains batholith and an extra-regional source from the Mesoproterozoic Belt Supergroup and the Late Cretaceous Atlanta lobe of the Idaho batholith. Particularly robust linkages include: (1) juvenile (εHf >+10) Late Cretaceous zircon derived from the southern Coast Mountains batholith; (2) a bimodal Proterozoic detrital zircon signature consistent with derivation from Belt Supergroup (1700–1720 Ma) and ca. 1380 Ma plutonic rocks intruding the Lemhi subbasin of central Idaho (northwestern United States); (3) quartzite clasts that are statistical matches for Mesoproterozoic and Cambrian strata in Montana and Idaho (northwestern United States) and southern British Columbia; and (4) syndepositional evolved (εHf >−10) Late Cretaceous zircon and muscovite derived from the Atlanta lobe of the Idaho batholith. These provenance constraints support a tectonic restoration of the Nanaimo Basin, the southern Coast Mountains batholith, and Wrangellia to a position outboard of the Idaho batholith in Late Cretaceous time, consistent with proposed minimal-fault-offset models (<~1000 km).

Sign in / Sign up

Export Citation Format

Share Document