scholarly journals A high-resolution consensus linkage map for barley based on GBS-derived genotypes

Genome ◽  
2021 ◽  
pp. 1-12
Author(s):  
Amina Abed ◽  
Ana Badea ◽  
Aaron Beattie ◽  
Raja Khanal ◽  
James Tucker ◽  
...  

As genotyping-by-sequencing (GBS) is widely used in barley genetic studies, the translation of the physical position of GBS-derived SNPs into accurate genetic positions has become relevant. The main aim of this study was to develop a high-resolution consensus linkage map based on GBS-derived SNPs. The construction of this integrated map involved 11 bi-parental populations composed of 3743 segregating progenies. We adopted a uniform set of SNP-calling and filtering conditions to identify 50 875 distinct SNPs segregating in at least one population. These SNPs were grouped into 18 580 non-redundant SNPs (bins). The resulting consensus linkage map spanned 1050.1 cM, providing an average density of 17.7 bins and 48.4 SNPs per cM. The consensus map is characterized by the absence of large intervals devoid of marker coverage (significant gaps), the largest interval between bins was only 3.7 cM and the mean distance between adjacent bins was 0.06 cM. This high-resolution linkage map will contribute to several applications in genomic research, such as providing useful information on the recombination landscape for QTLs/genes identified via GWAS or ensuring a uniform distribution of SNPs when developing low-cost genotyping tools offering a limited number of markers.

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4675
Author(s):  
Ayat-allah Bouramdane ◽  
Alexis Tantet ◽  
Philippe Drobinski

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified.


2021 ◽  
Vol 28 ◽  
pp. 107327482110099
Author(s):  
Abdosaleh Jafari ◽  
Peyman Mehdi Alamdarloo ◽  
Mehdi Dehghani ◽  
Peivand Bastani ◽  
Ramin Ravangard

Among cancers, colorectal cancer is the third most common cancer in the world and the fourth leading cause of cancer deaths worldwide. Some studies have shown that the incidence of colorectal cancer is increasing in Iran and in Fars province. The present study aimed to determine the economic burden of colorectal cancer in patients referred to the referral centers affiliated to Iran, Shiraz University of Medical Sciences in 2019 from the patients’ perspective. This is a partial economic evaluation and a cost-of-illness study conducted cross-sectionally in 2019. All the patients with colorectal cancer who had been referred to the referral centers affiliated to Iran, Shiraz University of Medical Sciences, and had medical records were studied through the census method (N = 96). A researcher-made data collection form was used to collect the cost data. The prevalence-based and bottom-up approaches were also used in this study. The human capital approach was applied to calculate indirect costs. The mean annual cost per patient with colorectal cancer in the present study was $10930.98 purchasing power parity (PPP) (equivalent to 5745.29 USD), the main part of which was the medical direct costs (74.86%). Also, among the medical direct costs per patient, the highest were those of surgeries (41.7%). In addition, the mean annual cost per patient with colorectal cancer in the country was $ 116917762 PPP (equivalent to 61451621.84 USD) in 2019. Regarding the considerable economic burden of colorectal cancer and in order to reduce the costs, these suggestions can be made: increasing the number of specialized beds through the cooperation of health donors, establishing free or low-cost accommodation centers for patients and their companions near the medical centers, using the Internet and cyberspace technologies to follow up the treatment of patients, and increasing insurance coverage and government drug subsidies on drug purchase.


2020 ◽  
Vol 79 (Suppl 1) ◽  
pp. 1358.1-1359
Author(s):  
C. Romero-Sánchez ◽  
W. Bautista-Molano ◽  
Y. M. Chamorro-Melo ◽  
A. Beltrán-Ostos ◽  
J. De Avila ◽  
...  

Background:HLA-B*27 has been identify as a susceptibility and prognostic factor associated to axial spondyloarthritis. HLA-B*27 allele has been described to be present in about 90% of patients with ankylosing spondylitis, and with a different frequency in patients with other subtypes of SpA. In contrast, this allele has been observed to be present only in 7–8% in general population. A remarkable heterogeneity in HLA-B*27 alleles has been reported. They have been determined at DNA sequence and some subtypes have been associated increasing the risk to develop the diseaseObjectives:To establish the frequencies of HLA-B27 subtypes in a group of Colombian patients with SpA and healthy populationMethods:In total, 61 Blood samples from Colombian mestizo individuals with SpA according to ASAS classification-criteria were evaluated by Sequencing Technology: Illumina Sequencing/PacBio Sequencing with analysis of the second and third exon. Results reported with six digits (including null alleles). In total, 294 results of peripheral blood from healthy individuals without joint symptoms were analyzed. Frequencies were obtained for demographic and genetic variables. Ethic Committee approval code 2018-020/2017-023Results:The SpA group had a mean age of 45,88 ± 11,67, 62.3% of them were male, 6.6% reported current smoking and 37.7% reported smoking sometime in life. In total, 67.2% had inflammatory back pain, 14.8% had dactylitis, 63.9% enthesitis and 57.4% arthritis. Thirty patients were HLA-B*27 positive with a genotypic frequency of 50.8% and an allelic frequency of 24.6%. In this group of patients, the mean age was 43,5 ± 11,8, 76.6% were male, 86.7% of them were subtype B*27:05:02g and 13.3% presented the B27:02:01g. None of the SpA patients had both B*27 alleles.On the other hand, the healthy individuals were men in 51.0% and the mean age was 37±15.4 years. Ten subjects were positive for the HLA-B*27 allele with a genotypic frequency of 3.4% and an allelic frequency of 1.7%. In this group of individuals 50.0% were male gender with a mean age of 38.4±17.9. No individuals were found to have the two alleles or homozygous for the B*27 allele. In all of them the subtype B*27:05:02g was observed in high-resolution sequencingConclusion:The SpA group had a mean age of 45,88 ± 11,67, 62.3% of them were male, 6.6% reported current smoking and 37.7% reported smoking sometime in life. In total, 67.2% had inflammatory back pain, 14.8% had dactylitis, 63.9% enthesitis and 57.4% arthritis. Thirty patients were HLA-B*27 positive with a genotypic frequency of 50.8% and an allelic frequency of 24.6%. In this group of patients, the mean age was 43,5 ± 11,8, 76.6% were male, 86.7% of them were subtype B*27:05:02g and 13.3% presented the B27:02:01g. None of the SpA patients had both B*27 alleles.On the other hand, the healthy individuals were men in 51.0% and the mean age was 37±15.4 years. Ten subjects were positive for the HLA-B*27 allele with a genotypic frequency of 3.4% and an allelic frequency of 1.7%. In this group of individuals 50.0% were male gender with a mean age of 38.4±17.9. No individuals were found to have the two alleles or homozygous for the B*27 allele. In all of them the subtype B*27:05:02g was observed in high-resolution sequencingAcknowledgments:Hospital Militar Central (Grant 2017-023/2018-020), the Government Institute of Science, Technology, and Innovation, Francisco Jose de Caldas—COLCIENCIAS (Grant No. 130877757442) and Colombian Rheumatology Association (Grant-Conv-2019)Disclosure of Interests:None declared


Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 785
Author(s):  
Chow Shing Shin ◽  
Yu Chia Chang

Lattice structures are superior to stochastic foams in mechanical properties and are finding increasing applications. Their properties can be tailored in a wide range through adjusting the design and dimensions of the unit cell, changing the constituent materials as well as forming into hierarchical structures. In order to achieve more levels of hierarchy, the dimensions of the fundamental lattice have to be small enough. Although lattice size of several microns can be fabricated using the two-photon polymerization technique, sophisticated and costly equipment is required. To balance cost and performance, a low-cost high resolution micro-stereolithographic system has been developed in this work based on a commercial digital light processing (DLP) projector. Unit cell lengths as small as 100 μm have been successfully fabricated. Decreasing the unit cell size from 150 to 100 μm increased the compressive stiffness by 26%. Different pretreatments to facilitate the electroless plating of nickel on the lattice structure have been attempted. A pretreatment of dip coating in a graphene suspension is the most successful and increased the strength and stiffness by 5.3 and 3.6 times, respectively. Even a very light and incomplete nickel plating in the interior has increase the structural stiffness and strength by more than twofold.


2008 ◽  
Vol 18 (02) ◽  
pp. 393-400 ◽  
Author(s):  
ROBERT J. GRASSO ◽  
JOHN C. WIKMAN ◽  
DAVID P. DROUIN ◽  
GEORGE F. DIPPEL ◽  
PAUL I. EGBERT

BAE SYSTEMS has developed a Low Cost Targeting System (LCTS) consisting of a FLIR for target detection, laser-illuminated, gated imaging for target identification, laser rangefinder and designator, GPS positioning, and auto-tracking capability within a small compact system size. The system is based upon BAE Systems proven micro-bolometer passive LWIR camera coupled with Intevac's new EBAPS camera. A dual wavelength diode pumped laser provides eyesafe ranging and target illumination, as well as designation; a custom detector module senses the return pulse for target ranging and to set the range gates for the gated camera. Trials show that the current detectors offer complete extinction of signals outside of the gated range, thus, providing high resolution within the gated region. The images have shown high spatial resolution arising from the use of solid state focal plane array technology. Imagery has been collected in both the laboratory and the field to verify system performance during a variety of operating conditions.


2014 ◽  
Vol 52 (7) ◽  
pp. 3823-3832 ◽  
Author(s):  
Sutharshan Rajasegarar ◽  
Timothy C. Havens ◽  
Shanika Karunasekera ◽  
Christopher Leckie ◽  
James C. Bezdek ◽  
...  

2013 ◽  
Vol 30 (10) ◽  
pp. 2352-2366 ◽  
Author(s):  
Dale A. Lawrence ◽  
Ben B. Balsley

Abstract The DataHawk small airborne measurement system provides in situ atmospheric measurement capabilities for documenting scales as small as 1 m and can access reasonably large volumes in and above the atmospheric boundary layer at low cost. The design of the DataHawk system is described, beginning with the atmospheric measurement requirements, and articulating five key challenges that any practical measurement system must overcome. The resulting characteristics of the airborne and ground support components of the DataHawk system are outlined, along with its deployment, operating, and recovery modes. Typical results are presented to illustrate the types and quality of data provided by the current system, as well as the need for more of these finescale measurements. Particular focus is given to the DataHawk's ability to make very-high-resolution measurements of a variety of atmospheric variables simultaneously, with emphasis given to the measurement of two important finescale turbulence parameters, (the temperature turbulence structure constant) and ɛ (the turbulent energy dissipation rate). Future sensing possibilities and limitations using this approach are also discussed.


Sign in / Sign up

Export Citation Format

Share Document