A MATHEMATICAL MODEL FOR ANALYSIS OF WAVE PROPAGATION IN A LINEARIZED VERTICALLY NONUNIFORM PARTIALLY IONIZED GAS

1966 ◽  
Vol 44 (5) ◽  
pp. 1047-1065 ◽  
Author(s):  
Harold R. Raemer

Wave propagation in fully and partially ionized gases, with and without magnetic fields, has been treated by several workers; e.g., Tanenbaum and Mintzer (1962) obtained dispersion relations for a linearized and spatially uniform gas of electrons, positive ions, and neutrals. The present paper discusses the basic formulation and mathematical treatment of wave propagation in a linearized electron – ion – neutral gas, with static magnetic field, in which ambient-gas parameters vary arbitrarily vertically and are uniform horizontally.A standard formulation of the general problem is discussed via Boltzmann and Maxwell equations. By momentum-space averaging, the Boltzmann equation yields motion, continuity, and dynamic adiabatic state equations. These are combined to yield neutral and plasma equations of motion, continuity, and adiabatic state and a generalized Ohm's Law. Steady-state plane-wave solutions of the form exp[−i(ωt – kxx)] are assumed, reducing the x, y, and t dependence to algebraic relations, but the equations remain differential in z. The system consists of 10 simultaneous coupled ordinary first-order complex differential equations and 11 simultaneous complex algebraic equations in 21 complex unknowns.The second part of the paper is a discussion of the solution of this coupled algebraic differential equation system, equivalent to the system arising in the analysis of coupled linear electrical networks. Referring to the literature of differential equations and modern automatic control systems, various purely analytical approaches are discussed with emphasis on their deficiencies in obtaining practical numerical results with an arbitrary z variation. The Runge–Kutta step-by-step-procedure was invoked eventually and a Fortran program based on this technique was written. The program can be used to obtain accurate numerical solutions to many problems involving wave propagation in a linearized, vertically nonuniform electron – ion – neutral gas without requiring drastic simplifying assumptions for the vertical nonuniformity. This program can be used, by changing input parameter values, to treat such diverse problems as the perturbing effect of acoustic–gravity waves on ionospheric electron density, electromagnetic wave propagation in the vertically inhomogeneous ionosphere, MHD waves high in the ionosphere, or various kinds of wave propagation in prepared plasmas with a one-dimensional inhomogeneity. Numerical solutions for the acoustic – gravity wave – plasma interaction problem and their interpretation will be reported in a later paper.

2011 ◽  
Vol 82 ◽  
pp. 214-219
Author(s):  
Karl Micallef ◽  
Arash Soleiman-Fallah ◽  
Paul T. Curtis ◽  
Daniel J. Pope ◽  
Luke A. Louca

Hyperbolic partial differential equations with one space variable are used to investigate the longitudinal wave propagation through an elastic composite medium. A high order Lagrangian finite element is used to model the wave propagation and the weak-form Galerkin weighted residual method is adopted for solving the governing differential equations, viz., the one-dimensional wave equation which is extended to include damping and strain-rate effects. The numerical solutions are compared to analytical solutions (where they exist) and excellent temporal and spatial correlation is achieved, within 90-95% accuracy. It is found that damping leads to a decrease in peak stresses and strains by up to 11% for 5% of critical damping, even during the direct loading phase. It is shown that the inclusion of strain-rate did not have an effect on strains but led to an increase in stresses by almost 95%. The inclusion of both damping and strain-rate effects together increased stress values by up to 70% compared to the non-viscous cases.


Author(s):  
V. F. Edneral ◽  
O. D. Timofeevskaya

Introduction:The method of resonant normal form is based on reducing a system of nonlinear ordinary differential equations to a simpler form, easier to explore. Moreover, for a number of autonomous nonlinear problems, it is possible to obtain explicit formulas which approximate numerical calculations of families of their periodic solutions. Replacing numerical calculations with their precalculated formulas leads to significant savings in computational time. Similar calculations were made earlier, but their accuracy was insufficient, and their complexity was very high.Purpose:Application of the resonant normal form method and a software package developed for these purposes to fourth-order systems in order to increase the calculation speed.Results:It has been shown that with the help of a single algorithm it is possible to study equations of high orders (4th and higher). Comparing the tabulation of the obtained formulas with the numerical solutions of the corresponding equations shows good quantitative agreement. Moreover, the speed of calculation by prepared approximating formulas is orders of magnitude greater than the numerical calculation speed. The obtained approximations can also be successfully applied to unstable solutions. For example, in the Henon — Heyles system, periodic solutions are surrounded by chaotic solutions and, when numerically integrated, the algorithms are often unstable on them.Practical relevance:The developed approach can be used in the simulation of physical and biological systems.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wasim Jamshed ◽  
Mohamed R. Eid ◽  
Kottakkaran Sooppy Nisar ◽  
Nor Ain Azeany Mohd Nasir ◽  
Abhilash Edacherian ◽  
...  

AbstractThe current investigation aims to examine heat transfer as well as entropy generation analysis of Powell-Eyring nanofluid moving over a linearly expandable non-uniform medium. The nanofluid is investigated in terms of heat transport properties subjected to a convectively heated slippery surface. The effect of a magnetic field, porous medium, radiative flux, nanoparticle shapes, viscous dissipative flow, heat source, and Joule heating are also included in this analysis. The modeled equations regarding flow phenomenon are presented in the form of partial-differential equations (PDEs). Keller-box technique is utilized to detect the numerical solutions of modeled equations transformed into ordinary-differential equations (ODEs) via suitable similarity conversions. Two different nanofluids, Copper-methanol (Cu-MeOH) as well as Graphene oxide-methanol (GO-MeOH) have been taken for our study. Substantial results in terms of sundry variables against heat, frictional force, Nusselt number, and entropy production are elaborate graphically. This work’s noteworthy conclusion is that the thermal conductivity in Powell-Eyring phenomena steadily increases in contrast to classical liquid. The system’s entropy escalates in the case of volume fraction of nanoparticles, material parameters, and thermal radiation. The shape factor is more significant and it has a very clear effect on entropy rate in the case of GO-MeOH nanofluid than Cu-MeOH nanofluid.


Open Physics ◽  
2020 ◽  
Vol 18 (1) ◽  
pp. 545-554
Author(s):  
Asghar Ali ◽  
Aly R. Seadawy ◽  
Dumitru Baleanu

AbstractThis article scrutinizes the efficacy of analytical mathematical schemes, improved simple equation and exp(-\text{Ψ}(\xi ))-expansion techniques for solving the well-known nonlinear partial differential equations. A longitudinal wave model is used for the description of the dispersion in the circular rod grounded via transverse Poisson’s effect; similarly, the Boussinesq equation is used for extensive wave propagation on the surface of water. Many other such types of equations are also solved with these techniques. Hence, our methods appear easier and faster via symbolic computation.


Author(s):  
BeiBei Guo ◽  
Wei Jiang ◽  
ChiPing Zhang

The nonlinear fractional-order Fokker–Planck differential equations have been used in many physical transport problems which take place under the influence of an external force filed. Therefore, high-accuracy numerical solutions are always needed. In this article, reproducing kernel theory is used to solve a class of nonlinear fractional Fokker–Planck differential equations. The main characteristic of this approach is that it induces a simple algorithm to get the approximate solution of the equation. At the same time, an effective method for obtaining the approximate solution is established. In addition, some numerical examples are given to demonstrate that our method has lesser computational work and higher precision.


1970 ◽  
Vol 37 (1) ◽  
pp. 48-52 ◽  
Author(s):  
J. T. Oden ◽  
S. B. Childs

The problem of finite deflections of a nonlinearly elastic bar is investigated as an extension of the classical theory of the elastica to include material nonlinearities. A moment-curvature relation in the form of a hyperbolic tangent law is introduced to simulate that of a class of elastoplastic materials. The problem of finite deflections of a clamped-end bar subjected to an axial force is given special attention, and numerical solutions to the resulting system of nonlinear differential equations are obtained. Tables of results for various values of the parameters defining the material are provided and solutions are compared with those of the classical theory of the elastica.


Sign in / Sign up

Export Citation Format

Share Document