scholarly journals A numerical frame work of magnetically driven Powell-Eyring nanofluid using single phase model

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wasim Jamshed ◽  
Mohamed R. Eid ◽  
Kottakkaran Sooppy Nisar ◽  
Nor Ain Azeany Mohd Nasir ◽  
Abhilash Edacherian ◽  
...  
Keyword(s):  
Differential Equations ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Dissipative Flow ◽  
Uniform Medium ◽  
Heat Transport Properties ◽  
Flow Heat ◽  
Frame Work ◽  
Slippery Surface ◽  
Nanoparticle Shapes

AbstractThe current investigation aims to examine heat transfer as well as entropy generation analysis of Powell-Eyring nanofluid moving over a linearly expandable non-uniform medium. The nanofluid is investigated in terms of heat transport properties subjected to a convectively heated slippery surface. The effect of a magnetic field, porous medium, radiative flux, nanoparticle shapes, viscous dissipative flow, heat source, and Joule heating are also included in this analysis. The modeled equations regarding flow phenomenon are presented in the form of partial-differential equations (PDEs). Keller-box technique is utilized to detect the numerical solutions of modeled equations transformed into ordinary-differential equations (ODEs) via suitable similarity conversions. Two different nanofluids, Copper-methanol (Cu-MeOH) as well as Graphene oxide-methanol (GO-MeOH) have been taken for our study. Substantial results in terms of sundry variables against heat, frictional force, Nusselt number, and entropy production are elaborate graphically. This work’s noteworthy conclusion is that the thermal conductivity in Powell-Eyring phenomena steadily increases in contrast to classical liquid. The system’s entropy escalates in the case of volume fraction of nanoparticles, material parameters, and thermal radiation. The shape factor is more significant and it has a very clear effect on entropy rate in the case of GO-MeOH nanofluid than Cu-MeOH nanofluid.

scholarly journals The Effect of Heat Transfer on MHD Marangoni Boundary Layer Flow Past a Flat Plate in Nanofluid

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
D. R. V. S. R. K. Sastry ◽  
A. S. N. Murti ◽  
T. Poorna Kantha
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Boundary Layer ◽  
Similarity Transformations ◽  
Layer Flow

The problem of heat transfer on the Marangoni convection boundary layer flow in an electrically conducting nanofluid is studied. Similarity transformations are used to transform the set of governing partial differential equations of the flow into a set of nonlinear ordinary differential equations. Numerical solutions of the similarity equations are then solved through the MATLAB “bvp4c” function. Different nanoparticles like Cu, Al2O3, and TiO2 are taken into consideration with water as base fluid. The velocity and temperature profiles are shown in graphs. Also the effects of the Prandtl number and solid volume fraction on heat transfer are discussed.

scholarly journals Similarity Solution of Marangoni Convection Boundary Layer Flow over a Flat Surface in a Nanofluid

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Norihan Md. Arifin ◽  
Roslinda Nazar ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Convection Boundary Layer ◽  
Flow And Heat Transfer ◽  
Different Types ◽  
Layer Flow

The problem of steady Marangoni boundary layer flow and heat transfer over a flat plate in a nanofluid is studied using different types of nanoparticles. The general governing partial differential equations are transformed into a set of two nonlinear ordinary differential equations using unique similarity transformation. Numerical solutions of the similarity equations are obtained using the Runge-Kutta-Fehlberg (RKF) method. Three different types of nanoparticles are considered, namely, Cu, Al2O3, and TiO2, by using water as a base fluid with Prandtl numberPr=6.2. The effects of the nanoparticle volume fractionϕand the constant exponentmon the flow and heat transfer characteristics are obtained and discussed.

scholarly journals Shifted Legendre Collocation Method for the Solution of Unsteady Viscous-Ohmic Dissipative Hybrid Ferrofluid Flow over a Cylinder

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1512
Author(s):  
Shekar Saranya ◽  
Qasem M. Al-Mdallal ◽  
Shumaila Javed
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Differential Equations ◽  
Skin Friction ◽  
Numerical Solutions ◽  
Skin Friction Coefficient ◽  
Algebraic Equations ◽  
Transfer Rates ◽  
Dissipative Flow ◽  
Legendre Collocation Method

A numerical treatment for the unsteady viscous-Ohmic dissipative flow of hybrid ferrofluid over a contracting cylinder is provided in this study. The hybrid ferrofluid was prepared by mixing a 50% water (H2O) + 50% ethylene glycol (EG) base fluid with a hybrid combination of magnetite (Fe3O4) and cobalt ferrite (CoFe2O4) ferroparticles. Suitable parameters were considered for the conversion of partial differential equations (PDEs) into ordinary differential equations (ODEs). The numerical solutions were established by expanding the unknowns and employing the truncated series of shifted Legendre polynomials. We begin by collocating the transformed ODEs by setting the collocation points. These collocated equations yield a system of algebraic equations containing shifted Legendre coefficients, which can be obtained by solving this system of equations. The effect of the various influencing parameters on the velocity and temperature flow profiles were plotted graphically and discussed in detail. The effects of the parameters on the skin friction coefficient and heat transfer rates were further presented. From the discussion, we come to the understanding that Eckert number considerably decreases both the skin friction coefficient and the heat transfer rate.

Normal form method in search for periodic solutions of ordinary differential equations. Case of the fourth order

2018 ◽  
pp. 24-34
Author(s):  
V. F. Edneral ◽  
O. D. Timofeevskaya
Keyword(s):  
Normal Form ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Periodic Solutions ◽  
Fourth Order ◽  
Numerical Solutions ◽  
Numerical Calculations ◽  
Computational Time ◽  
Resonant Normal Form ◽  
Normal Form Method

Introduction:The method of resonant normal form is based on reducing a system of nonlinear ordinary differential equations to a simpler form, easier to explore. Moreover, for a number of autonomous nonlinear problems, it is possible to obtain explicit formulas which approximate numerical calculations of families of their periodic solutions. Replacing numerical calculations with their precalculated formulas leads to significant savings in computational time. Similar calculations were made earlier, but their accuracy was insufficient, and their complexity was very high.Purpose:Application of the resonant normal form method and a software package developed for these purposes to fourth-order systems in order to increase the calculation speed.Results:It has been shown that with the help of a single algorithm it is possible to study equations of high orders (4th and higher). Comparing the tabulation of the obtained formulas with the numerical solutions of the corresponding equations shows good quantitative agreement. Moreover, the speed of calculation by prepared approximating formulas is orders of magnitude greater than the numerical calculation speed. The obtained approximations can also be successfully applied to unstable solutions. For example, in the Henon — Heyles system, periodic solutions are surrounded by chaotic solutions and, when numerically integrated, the algorithms are often unstable on them.Practical relevance:The developed approach can be used in the simulation of physical and biological systems.

scholarly journals Investigation of binary chemical reaction in magnetohydrodynamic nanofluid flow with double stratification

2021 ◽  
Vol 13 (5) ◽  
pp. 168781402110162
Author(s):  
Aisha Anjum ◽  
Sadaf Masood ◽  
Muhammad Farooq ◽  
Naila Rafiq ◽  
Muhammad Yousaf Malik
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Hartmann Number ◽  
Concentration Field ◽  
Double Stratification ◽  
Nanofluid Flow ◽  
Homotopy Analysis ◽  
Flow Heat ◽  
Chemically Reactive Species ◽  
Physical Features

This article addresses MHD nanofluid flow induced by stretched surface. Heat transport features are elaborated by implementing double diffusive stratification. Chemically reactive species is implemented in order to explore the properties of nanofluid through Brownian motion and thermophoresis. Activation energy concept is utilized for nano liquid. Further zero mass flux is assumed at the sheet’s surface for better and high accuracy of the out-turn. Trasnformations are used to reconstruct the partial differential equations into ordinary differential equations. Homotopy analysis method is utilized to obtain the solution. Physical features like flow, heat and mass are elaborated through graphs. Thermal stratified parameter reduces the temperature as well as concentration profile. Also decay in concentration field is noticed for larger reaction rate parameter. Both temperature and concentration grows for Thermophoresis parameter. To check the heat transfer rate, graphical exposition of Nusselt number are also discussed and interpret. It is noticed that amount of heat transfer decreases with the increment in Hartmann number. Numerical results shows that drag force increased for enlarged Hartmann number.

scholarly journals Parametric analysis of the heat transfer behavior of the nano-particle ionic-liquid flow between concentric cylinders

2021 ◽  
Vol 13 (6) ◽  
pp. 168781402110240
Author(s):  
Rehan Ali Shah ◽  
Hidayat Ullah ◽  
Muhammad Sohail Khan ◽  
Aamir Khan
Keyword(s):  
Heat Transfer ◽  
Ionic Liquid ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Heat Source ◽  
Ordinary Differential Equations ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Concentric Cylinders

This paper investigates the enhanced viscous behavior and heat transfer phenomenon of an unsteady two di-mensional, incompressible ionic-nano-liquid squeezing flow between two infinite parallel concentric cylinders. To analyze heat transfer ability, three different type nanoparticles such as Copper, Aluminum [Formula: see text], and Titanium oxide [Formula: see text] of volume fraction ranging from 0.1 to 0.7 nm, are added to the ionic liquid in turns. The Brinkman model of viscosity and Maxwell-Garnets model of thermal conductivity for nano particles are adopted. Further, Heat source [Formula: see text], is applied between the concentric cylinders. The physical phenomenon is transformed into a system of partial differential equations by modified Navier-Stokes equation, Poisson equation, Nernst-Plank equation, and energy equation. The system of nonlinear partial differential equations, is converted to a system of coupled ordinary differential equations by opting suitable transformations. Solution of the system of coupled ordinary differential equations is carried out by parametric continuation (PC) and BVP4c matlab based numerical methods. Effects of squeeze number ( S), volume fraction [Formula: see text], Prandtle number (Pr), Schmidt number [Formula: see text], and heat source [Formula: see text] on nano-ionicliquid flow, ions concentration distribution, heat transfer rate and other physical quantities of interest are tabulated, graphed, and discussed. It is found that [Formula: see text] and Cu as nanosolid, show almost the same enhancement in heat transfer rate for Pr = 0.2, 0.4, 0.6.

scholarly journals Numerical Simulation of Heat Transfer Flow Subject to MHD of Williamson Nanofluid with Thermal Radiation

Symmetry ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 10
Author(s):  
Muhammad Amer Qureshi
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Single Phase ◽  
Physical Parameters ◽  
Fundamental Symmetry ◽  
Box Scheme ◽  
Mhd Boundary Layer ◽  
Slippery Surface ◽  
Transfer Flow

In this paper, heat transfer and entropy of steady Williamson nanofluid flow based on the fundamental symmetry is studied. The fluid is positioned over a stretched flat surface moving non-uniformly. Nanofluid is analyzed for its flow and thermal transport properties by consigning it to a convectively heated slippery surface. Thermal conductivity is assumed to be varied with temperature impacted by thermal radiation along with axisymmetric magnetohydrodynamics (MHD). Boundary layer approximations lead to partial differential equations, which are transformed into ordinary differential equations in light of a single phase model accounting for Cu-water and TiO2-water nanofluids. The resulting ODEs are solved via a finite difference based Keller box scheme. Various formidable physical parameters affecting fluid movement, difference in temperature, system entropy, skin friction and Nusselt number around the boundary are presented graphically and numerically discussed. It has also been observed that the nanofluid based on Cu-water is identified as a superior thermal conductor rather than TiO2-water based nanofluid.

Sign in / Sign up

Export Citation Format

Share Document