Contaminant transport through an unsaturated soil liner beneath a landfill

1999 ◽  
Vol 36 (2) ◽  
pp. 330-354 ◽  
Author(s):  
S G Fityus ◽  
Daniel W Smith ◽  
J R Booker

Contaminant transport through soil is often modelled mathematically by means of the dispersion-advection equation. When investigating contaminant migration beneath a landfill, a common assumption is that the soil is saturated; however, it is well known that the soil beneath many landfills is only partially saturated. In this paper, steady-state unsaturated moisture distributions are employed in the dispersion-advection equation to find transient contaminant distributions beneath a landfill. A finite layer formulation is used to simplify the contaminant mass transport equation and account for heterogeneous soil profiles. Various assumptions concerning the flow regime beneath the landfill and the functional relation between volumetric water content and the diffusion coefficient in the transport equation are made to highlight differences between contaminant transport through saturated and unsaturated soils. It is found that diffusive contaminant mass transfer through a partially saturated soil liner is comparatively insensitive to variation of the volumetric moisture content at the top of the soil liner alone. However, accounting for the dependence of the diffusion coefficient on the volumetric moisture content of the soil does have a significant effect on diffusive mass transfer through a partially saturated soil liner. Though it is difficult to measure the dependence of the diffusion coefficient on the volumetric moisture content of the soil experimentally, this information appears necessary for a rational analysis of contaminant transport through partially saturated soils.Key words: landfill, contaminant transport, unsaturated soil.

Author(s):  
Najmur Rahman ◽  
Subodh Kumar

An analytical diffusion model which considers the influence of the external resistance to mass transfer, sample finite geometry and shrinkage is proposed to simulate drying kinetic curves of cylindrical bodies. The convective mass transfer coefficients, hm at air-solid interface obtained from natural convection drying experiments on potato cylinders of length 0.05m and diameter 0.01m at different air drying temperatures were used for the model evaluation. Using Levenberg-Marquardt algorithm for optimization, an empirical relation describing effective diffusion coefficient of potato as a function of air temperature and material moisture content is proposed for finite and infinite cylinders with and without considering shrinkage. The significance of material moisture content in the proposed diffusion coefficient relation is demonstrated through a comparison between the predicted and experimental moisture content ratios. The mean effective diffusion coefficient, Deff for finite shrinking cylindrical bodies is found to vary from 3.93 to 8.63 x 10-10 m2/s for the temperature range of 40 to 60°C. In addition, the assumption of infinite geometry instead of finite one in the model evaluation results in an overestimation of Deff. However, lower values of Deff are obtained when shrinkage effect is taken into account in the analysis, irrespective of the product size considered.


2018 ◽  
Vol 174 ◽  
pp. 03004
Author(s):  
Paweł Fedczuk

The paper presents a concept of numerical analysis of suction influence on behaviour of partially saturated soil medium. Behaviour of soil is described by elasto-plastic model of unsaturated soil [1]. A numerical procedure of stress path simulation in the triaxial test [2] is used for the analysis of one non-standard shear path (for 3 suction levels).


PAMM ◽  
2009 ◽  
Vol 9 (1) ◽  
pp. 215-216 ◽  
Author(s):  
Felix Nagel ◽  
Janosch Stascheit ◽  
Günther Meschke

1994 ◽  
Vol 356 ◽  
Author(s):  
S. Y. Tam ◽  
L. E. Scriven ◽  
H. K. Stolarski

AbstractA model is developed to predict the magnitude and pattern of stress due to drying of polymer films. This model combines diffusion-and-convection equation with large deformation elasto-viscoplasticity, utilizing concentration dependent elastic and viscoplastic material properties to better represent the behavior of drying thin films.The results show that the highest stress occurs at film surface where the concentration depletion is the highest. The magnitude of this stress is induced by increasing mass transfer across the film surface but reduced by increasing diffusion coefficient. The edge effect is significant but local, limited to about four film thicknesses. Similarly, change in substrate induces extra stress.


2018 ◽  
Vol 216 (1) ◽  
pp. 55-60 ◽  
Author(s):  
T Heinze ◽  
JK Limbrock ◽  
SP Pudasaini ◽  
A Kemna

SUMMARY Landslides present a latent danger to lives and infrastructure worldwide. Often such mass movements are caused by increasing pore pressure. The electrical self-potential (SP) method has been applied in a broad range of monitoring studies. When fluid flow is involved the most relevant source of SP is the streaming potential, caused by the flow of an electrolyte through porous media with electrically charged internal surfaces. We experimentally investigated the SP signal associated with deformation of partially saturated soil. For partly saturated scenarios, we observed an SP signature correlated with the mass movement. In dry experiments, we did not observe any significant change in the electric signal. Results of numerical simulations match with the experimental observations when assuming a local and temporary alteration of the hydraulic pressure due to the sliding mass. Our findings suggest that SP measurements can be used to observe mass movement triggered by fluid pressure variations through the streaming potential.


Sign in / Sign up

Export Citation Format

Share Document