Status of the utilization of jack pine (Pinusbanksiana) in the pulp and paper industry

1994 ◽  
Vol 24 (10) ◽  
pp. 2078-2084 ◽  
Author(s):  
Kwei-Nam Law ◽  
Jacques L. Valade
Keyword(s):  
Paper Industry ◽  
Chemical Properties ◽  
Pulp And Paper Industry ◽  
Jack Pine ◽  
Chemical Processes ◽  
Future Research ◽  
Physical And Chemical Properties ◽  
Physical And Chemical ◽  
Potential Use ◽  
And Chemical Properties

Although jack pine (Pinusbanksiana Lamb.), which represents 20% of the total softwood volume, is one of the most abundant commercial softwood species in Canada, its rate of utilization in pulping is surprisingly low. This paper reviews the literature concerning the physical and chemical properties as well as the pulping characteristics of this species by mechanical, thermomechanical, chemithermomechanical, chemimechanical, and chemical processes to better understand its potential use in papermaking. The objective is to identify the problems related to the use of jack pine so that solutions might be sought to promote its usage. Some recommendations are put forth concerning future research.

scholarly journals Nano-Structured Lignin as Green Antioxidant and UV Shielding Ingredient for Sunscreen Applications

Antioxidants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 274
Author(s):  
Davide Piccinino ◽  
Eliana Capecchi ◽  
Elisabetta Tomaino ◽  
Sofia Gabellone ◽  
Valeria Gigli ◽  
...  
Keyword(s):  
Low Cost ◽  
Paper Industry ◽  
Chemical Properties ◽  
Pulp And Paper Industry ◽  
Physical And Chemical Properties ◽  
Uv Shielding ◽  
Structure Activity ◽  
Physical And Chemical ◽  
And Chemical Properties ◽  
Nanoscale Level

Green, biocompatible, and biodegradable antioxidants represent a milestone in cosmetic and cosmeceutical applications. Lignin is the most abundant polyphenol in nature, recovered as a low-cost waste from the pulp and paper industry and biorefinery. This polymer is characterized by beneficial physical and chemical properties which are improved at the nanoscale level due to the emergence of antioxidant and UV shielding activities. Here we review the use of lignin nanoparticles in cosmetic and cosmeceutical applications, focusing on sunscreen and antiaging formulations. Advances in the technology for the preparation of lignin nanoparticles are described highlighting structure activity relationships.

Understanding the role of post-CCVD synthetic impurities, functional groups and functionalization-based oxidation debris on the behaviour of carbon nanotubes as a catalyst support in cyclohexene hydrogenation over Pd nanoparticles

RSC Advances ◽  
2016 ◽  
Vol 6 (91) ◽  
pp. 88538-88545 ◽  
Author(s):  
R. Puskas ◽  
A. Sápi ◽  
Á. Kukovecz ◽  
Z. Kónya
Keyword(s):  
Catalyst Support ◽  
Chemical Properties ◽  
Pd Nanoparticles ◽  
Chemical Processes ◽  
Physical And Chemical Properties ◽  
Surface Chemical ◽  
Physical And Chemical ◽  
Striking Effect ◽  
And Chemical Properties

Tuning of the surface modification has a striking effect on the physical and chemical properties of CNTs in surface chemical processes.

scholarly journals Purity and structural composition of lignin isolated from Miscanthus x giganteus by sub-critical water extraction with associated modifiers

2020 ◽  
Vol 1 (1) ◽  
pp. 1-12 ◽  
Keyword(s):  
Paper Industry ◽  
Chemical Properties ◽  
Value Added ◽  
Hydroxyl Groups ◽  
Physical And Chemical Properties ◽  
Miscanthus X Giganteus ◽  
Lignin Recovery ◽  
Physical And Chemical ◽  
The Impact ◽  
And Chemical Properties

Lignin is an industrial by-product produced from the pulping and paper industry, where the process generates lignin in the form of lignosulphonates. While there are many applications for lignin, there are all low value and attempts to add value to lignin are hindered by its complex physicochemical nature and the presence of sulphur. Adopting the biorefining concept, the study evaluates the impact of direct (DE) and sequential extraction (SE) of Miscanthus x giganteus using sub-critical water with associated modifiers; ethanol and carbon dioxide on the physical and chemical properties of the extracted lignin. Isolated lignins were characterised by a Fourier Transform Infrared Spectroscopy (FTIR). Although higher delignification was achieved by DE and SE about 81.5% and 58.0%, respectively, the lignin recovered from the SE process showed remarkably higher purity with 91.5%. Lignin recovery did not differ considerably for either processing method. FTIR revealed a qualitative reduction in the intensity of bonds corresponding to hydroxyl groups for the lignin derived from DE rather than SE processing routes. These indicated that the lignin derived from SE had potential for subsequent preparation in lignin value-added bio-based materials.

scholarly journals Subduction-Zone Fluids

Elements ◽  
2020 ◽  
Vol 16 (6) ◽  
pp. 395-400 ◽  
Author(s):  
Craig E. Manning ◽  
Maria Luce Frezzotti
Keyword(s):  
Subduction Zone ◽  
Subduction Zones ◽  
Thermal Structure ◽  
Chemical Properties ◽  
Chemical Processes ◽  
Physical And Chemical Properties ◽  
Volcanic Front ◽  
Physical And Chemical ◽  
Dissolved Silicate ◽  
And Chemical Properties

Fluids are essential to the physical and chemical processes in subduction zones. Two types of subduction-zone fluids can be distinguished. First, shallow fluids, which are relatively dilute and water rich and that have properties that vary between subduction zones depending on the local thermal regime. Second, deep fluids, which possess higher proportions of dissolved silicate, salts and non-polar gases relative to water content, and have properties that are broadly similar in most subduction systems, regardless of the local thermal structure. We review key physical and chemical properties of fluids in two key subduction-zone contexts—along the slab top and beneath the volcanic front—to illustrate the distinct properties of shallow and deep subduction-zone fluids.

Statistical criteria of stellar population types

1966 ◽  
Vol 24 ◽  
pp. 101-110
Author(s):  
W. Iwanowska
Keyword(s):  
Stellar Population ◽  
Chemical Properties ◽  
Spectrophotometric Study ◽  
Physical And Chemical Properties ◽  
Population Type ◽  
The Galaxy ◽  
Distribution Parameters ◽  
Physical And Chemical ◽  
Statistical Criteria ◽  
And Chemical Properties

In connection with the spectrophotometric study of population-type characteristics of various kinds of stars, a statistical analysis of kinematical and distribution parameters of the same stars is performed at the Toruń Observatory. This has a twofold purpose: first, to provide a practical guide in selecting stars for observing programmes, second, to contribute to the understanding of relations existing between the physical and chemical properties of stars and their kinematics and distribution in the Galaxy.

Response of corn (Zea mays L.) to various organic-based fertilizers in marginal upland of Sta. Rita, Samar

2017 ◽  
pp. 31-43
Author(s):  
Berta Ratilla ◽  
Loreme Cagande ◽  
Othello Capuno
Keyword(s):  
Block Design ◽  
Management Strategies ◽  
Chemical Properties ◽  
Organic Fertilizers ◽  
Growth And Yield ◽  
Physical And Chemical Properties ◽  
Total N ◽  
Randomized Complete Block Design ◽  
Physical And Chemical ◽  
And Chemical Properties

Organic farming is one of the management strategies that improve productivity of marginal uplands. The study aimed to: (1) evaluate effects of various organic-based fertilizers on the growth and yield of corn; (2) determine the appropriate combination for optimum yield; and (3) assess changes on the soil physical and chemical properties. Experiment was laid out in Randomized Complete Block Design, with 3 replications and 7 treatments, namely; T0=(0-0-0); T1=1t ha-1 Evans + 45-30-30kg N, P2O5, K2O ha-1; T2=t ha-1 Wellgrow + 45-30-30kg N, P2O5, K2O ha-1; T3=15t ha-1 chicken dung; T4=10t ha-1 chicken dung + 45-30-30kg N, P2O5, K2O ha-1; T5=15t ha-1 Vermicast; and T6=10t ha-1 Vermicast + 45-30-30kg N, P2O5, K2O ha-1. Application of organic-based fertilizers with or without inorganic fertilizers promoted growth of corn than the control. But due to high infestation of corn silk beetle(Monolepta bifasciata Horns), its grain yield was greatly affected. In the second cropping, except for Evans, any of these fertilizers applied alone or combined with 45-30-30kg N, P2O5, K2O ha-1 appeared appropriate in increasing corn earyield. Soil physical and chemical properties changed with addition of organic fertilizers. While bulk density decreased irrespective of treatments, pH, total N, available P and exchangeable K generally increased more with chicken dung application.

Sign in / Sign up

Export Citation Format

Share Document