scholarly journals The three point asymmetric cumulants in high multiplicity pp collisions

2021 ◽  
Vol 81 (12) ◽  
Author(s):  
B. Blok ◽  
R. Segev

AbstractWe study the influence of quantum interference and colour flow on three point correlations described by asymmetric cumulants in high multiplicity events in pp collisions. We use the model previously developed for the study of the collectivity in symmetric cumulants. We show that the resulting three point asymmetric cumulant is in qualitative agreement with the experimental data for the same parameters of the model as it was with the symmetric cumulants. Our results show that the initial state correlations must play a major role and may be even dominant in the explanation of the correlations in high multiplicity pp events.

1994 ◽  
Vol 19 ◽  
pp. 155-157 ◽  
Author(s):  
Lasse Makkonen

A new theory, in which friction is interpreted as the energy flux required to form surface at contact asperities, is applied to sliding on ice and snow. The results of this theoretical investigation show that in dry friction the relevant contact areas are of almost molecular scale. The properties of the interface layer in ice and snow friction arc poorly known, so that the implications of this new theory are somewhat speculative. However, qualitative agreement with experimental data is good, and the theory provides explanations to the success of some empirically developed methods of improving the frictional properties of skis and sledges.


2011 ◽  
Vol 306-307 ◽  
pp. 104-107
Author(s):  
Hong Chao Luo ◽  
Jun Mei Yang ◽  
Li Yuan Sun ◽  
Li Ping Ju

In the present work, the MCF model for semisolid metal slurries (SSMS) is applied to investigate the thixotropy of the Al-6.5wt%Si alloy under cyclic shear deformation. The study shows that the semisolid Al-6.5wt%Si alloy has the behavior of thixotropy. The area of the hysteresis loop increases with decreasing the up-time, the initial shear rate and increasing resting time, solid volume fraction and maximum shear rate, respectively. These results have qualitative agreement with the experimental data. The origin of the hysteresis loop is atrributed to the difference between the deagglomeration rate and the agglomeration rate.


1999 ◽  
Vol 121 (1) ◽  
pp. 102-104 ◽  
Author(s):  
M. E. Evard ◽  
A. E. Volkov

An approach has been presented to account for micro-plastic deformation and stress produced by accommodation of martensite. This has made it possible to describe such phenomena as incomplete recovery of strain, strain accumulation at thermocycling, and repeated two-way shape memory effect. Results of modeling are in good qualitative agreement with experimental data.


2015 ◽  
Vol 6 ◽  
pp. 1957-1969 ◽  
Author(s):  
Jacek Wojnarowicz ◽  
Sylwia Kusnieruk ◽  
Tadeusz Chudoba ◽  
Stanislaw Gierlotka ◽  
Witold Lojkowski ◽  
...  

Zinc oxide nanopowders doped with 1–15 mol % cobalt were produced by the microwave solvothermal synthesis (MSS) technique. The obtained nanoparticles were annealed at 800 °C in nitrogen (99.999%) and in synthetic air. The material nanostructure was investigated by means of the following techniques: X-ray diffraction (XRD), helium pycnometry density, specific surface area (SSA), inductively coupled plasma optical emission spectrometry (ICP-OES), extended X-ray absorption fine structure (EXAFS) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and with magnetometry using superconducting quantum interference device (SQUID). Irrespective of the Co content, nanoparticles in their initial state present a similar morphology. They are composed of loosely agglomerated spherical particles with wurtzite-type crystal structure with crystallites of a mean size of 30 nm. Annealing to temperatures of up to 800 °C induced the growth of crystallites up to a maximum of 2 μm in diameter. For samples annealed in high purity nitrogen, the precipitation of metallic α-Co was detected for a Co content of 5 mol % or more. For samples annealed in synthetic air, no change of phase structure was detected, except for precipitation of Co3O4 for a Co content of 15 mol %. The results of the magentometry investigation indicated that all as-synthesized samples displayed paramagnetic properties with a contribution of anti-ferromagnetic coupling of Co–Co pairs. After annealing in synthetic air, the samples remained paramagnetic and samples annealed under nitrogen flow showed a magnetic response under the influences of a magnetic field, likely related to the precipitation of metallic Co in nanoparticles.


1976 ◽  
Vol 15 (8) ◽  
pp. 269-273 ◽  
Author(s):  
G. F. Dell ◽  
H. Uto ◽  
L. C. L. Yuan ◽  
E. Amaldi ◽  
M. Beneventano ◽  
...  

1997 ◽  
Vol 62 (2) ◽  
pp. 223-237
Author(s):  
Jan Martinec ◽  
Jiří Hanika

The results are summarized of mathematical modelling of the effect of internal diffusion on the rate of m-th order reaction taking place under non-isothermal conditions in the catalyst particle with tetralobed cross section. The effectiveness of the tetralobe-shaped extrudate is compared with that of cylindrical extrudate. The results obtained on the basis of mathematical modelling are confronted with the experimental data obtained on studying the dehydration reaction of cyclohexanol on cylindrical and tetralobed extrudates of gama-alumina under the conditions of influence of internal diffusion. The experimental data are in a qualitative agreement with the theoretical ones and confirm the higher effectiveness of shaped catalyst in comparison with the cylindrical extrudate catalyst.


1949 ◽  
Vol 22 (2) ◽  
pp. 320-332
Author(s):  
Geoffrey Gee

Abstract Experimental data are reported on the effects of vulcanization, extension, and temperature on the swelling of rubber. Although in qualitative agreement with a simple equation derived from a statistical theory of polymer solutions, these reveal quantitative discrepancies which are important in discussions of two-phase equilibria.


2013 ◽  
Vol 11 (1) ◽  
pp. 57-62 ◽  
Author(s):  
Mariana Hristova

AbstractThe flash points of three binary mixtures, containing n-heptane, o-xylene, m-xylene and ethylbenzene, were measured by Pensky-Martens closed cup tester. The experimental data were compared with the calculated values using Liaw’s Model with the application of Raoult’s Law and Wilson equation. These equations were in good qualitative agreement.


Sign in / Sign up

Export Citation Format

Share Document