The preparation and electrochemical performance of Mo6S8 as cathode materials for magnesium ion batteries

2019 ◽  
Vol 34 (01n03) ◽  
pp. 2040012
Author(s):  
Zekun Wang ◽  
Jianfeng Huang ◽  
Jiayin Li
Keyword(s):  
Electron Microscopy ◽  
Electrochemical Performance ◽  
Specific Capacity ◽  
Reversible Capacity ◽  
X Ray Diffraction ◽  
Chevrel Phase ◽  
Transmission Electron ◽  
Magnesium Batteries ◽  
Magnesium Ion Batteries ◽  
Rechargeable Magnesium Batteries

In this work, we reported a Chevrel phase [Formula: see text], which was synthesized by a molten salt approach, and its electrochemical performance as a cathode material for rechargeable magnesium batteries. The phase composition and micromorphology of the product were measured and analyzed by X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The Chevrel phase sulfide delivered an excellent specific capacity of 91 mAh g[Formula: see text] at a current density of 0.2 C after 70 cycles. Its excellent reversible capacity, rate performance and cycle stability demonstrate the feasibility of the Chevrel phase [Formula: see text] materials for future rechargeable magnesium batteries.

scholarly journals Ce-Doped PANI/Fe3O4 Nanocomposites: Electrode Materials for Supercapattery

2021 ◽  
Vol 3 ◽  
Author(s):  
Subash Pandey ◽  
Shova Neupane ◽  
Dipak Kumar Gupta ◽  
Anju Kumari Das ◽  
Nabin Karki ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials ◽  
Specific Capacity ◽  
Maximum Energy ◽  
Potential Range ◽  
X Ray Diffraction ◽  
Active Electrode ◽  
Transmission Electron

In this study, we report on a combined approach to preparing an active electrode material for supercapattery application by making nanocomposites of Polyaniline/Cerium (PANI/Ce) with different weight percentages of magnetite (Fe3O4). Fourier-transform infrared spectroscopy (FTIR) and x-ray diffraction (XRD) analyses supported the interaction of PANI with Ce and the formation of the successful nanocomposite with magnetite nanoparticles. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses showed the uniform and porous morphology of the composites. Cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) were used to test the supercapattery behavior of the nanocomposite electrodes in 1.0 M H2SO4. It was found that the supercapattery electrode of PANI/Ce+7 wt.% Fe3O4 exhibited a specific capacity of 171 mAhg−1 in the potential range of −0.2 to 1.0 V at the current density of 2.5 Ag−1. Moreover, PANI/Ce+7 wt.% Fe3O4 revealed a power density of 376.6 Wkg−1 along with a maximum energy density of 25.4 Whkg−1 at 2.5 Ag−1. Further, the cyclic stability of PANI/Ce+7 wt.% Fe3O4 was found to be 96.0% after 5,000 cycles. The obtained results suggested that the PANI/Ce+Fe3O4 nanocomposite could be a promising electrode material candidate for high-performance supercapattery applications.

scholarly journals Characterization and Electrochemical Behavior of Graphene-Based Anode for Li-Ion Batteries

2011 ◽  
Vol 5 (1) ◽  
pp. 236-241 ◽  
Author(s):  
Wei-Ren Liu ◽  
Shin-Liang Kuo ◽  
Chia-Yi Lin ◽  
Yi-Chen Chiu ◽  
Ching-Yi Su ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Nanosheets ◽  
Rate Capability ◽  
Reversible Capacity ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Li Ion ◽  
Synthetic Graphite ◽  
Lower Impedance ◽  
Enhanced Electrochemical Performance

In this study, we investigate the characteristics and electrochemical properties of graphene nanosheets derived from chemical-thermal exfoliation processes of SFG44 synthetic graphite (SFG44-GNS). The characterizations and electrochemical measurements were carried out by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, cyclic voltammetry, BET, Raman, rate capability as well as cycling tests and AC impedance. The as-synthesized SFG44-GNS with larger d-spacing of 0.3407 nm exhibits reversible capacity of 626 mAh/g and good rate capability of ~ 300 mAh/g at 2C rate, which are superior to those of graphite anode. The enhanced electrochemical performance of GNS anode was resulted from larger d-spacing, lower impedance in the interface and enhanced pore volume. The results indicate that graphene-based material is a good candidate for HEV/EV application.

Hydrothermal Synthesis and Electrochemical Performance of WO3 Nanoparticles

2013 ◽  
Vol 750-752 ◽  
pp. 217-220
Author(s):  
Li Jin Feng ◽  
Rong Ma ◽  
Xiu Hua Li ◽  
Xu Chun Song
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cyclic Voltammetry ◽  
Hydrothermal Synthesis ◽  
Electrochemical Performance ◽  
Electrochemical Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrogen Intercalation ◽  
Transmission Electron

In the present paper, the WO3 nanoparticles were fabricated via a hydrothermal treatment. The products are characterized in detail by multiform techniques: transmission electron microscopy, X-ray diffraction. The results show that products are WO3 nanoparticles with diameter of about 100-150 nm. Electrochemistry properties of the prepared WO3 nanoparticles was characterized by cyclic voltammetry. Cyclic voltammetry results indicate that WO3 nanoparticles exhibits a remarkable electrochemical activity for hydrogen intercalation. The reason for electrochemical activity of WO3 nanoparticles is attributed to the formation of HxWO3 by hydrogen intercalation/de-intercalation into/out of the tungsten oxide.

Preparation and Properties of TiO2(B)/Graphene Nanocomposites as Anode Materials Fo Lithium-Ion Batteries

2014 ◽  
Vol 875-877 ◽  
pp. 183-186 ◽  
Author(s):  
Yi Ping Tang ◽  
Shi Ming Wang ◽  
Jia Feng Ding ◽  
Guang Ya Hou ◽  
Guo Qu Zheng
Keyword(s):  
Electron Microscopy ◽  
Electrochemical Performance ◽  
Anode Materials ◽  
Graphene Nanosheets ◽  
Coulombic Efficiency ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
Graphene Nanocomposites ◽  
Transmission Electron ◽  
Uniform Diameter

In this work, TiO2(B) nanotubes with uniform diameter were prepared by the simple route of hydrothermal synthesis, and graphene nanosheets were added to form TiO2(B)/graphene nanocomposites, the two kinds of materials were comparatively studied as anode materials. The morphology and crystal structure were studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The electrochemical performance was evaluated by galvanostatic chargedischarge tests. The results show that the nanocomposite electrode material has good electrochemical performance due to the contributions of graphene. At the current density of 50mA/g, the capacity of TiO2(B)/graphene is 135.8 mAh/g, and the coulombic efficiency is 61.8%, after 10 charge-discharge cycles it still retains 113.2mAh/g . However, TiO2(B) anode reduces rapidly to 65.6 mAh/g.

A Comparison of Exfoliation Methods on Microstructure and Electrochemical Performance of Graphene Nanosheets for Supercapacitors

2012 ◽  
Vol 15 (2) ◽  
pp. 97-101 ◽  
Author(s):  
Xinlu Li ◽  
Hongfang Song ◽  
Hao Wang ◽  
Hongyi Li ◽  
Yuxin Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Expansion ◽  
Microwave Irradiation ◽  
Electrochemical Performance ◽  
Electrochemical Property ◽  
Graphene Nanosheets ◽  
Specific Capacity ◽  
N2 Adsorption ◽  
Transmission Electron ◽  
Galvanostatic Discharge

Graphene nanosheets (GNS) were exfoliated by thermal expansion and microwave irradiation, respectively. The influence of exfoliation methods on GNS’s surface structure and electrochemical property were analyzed. The porosity structure of GNS was measured by N2 adsorption. The N2 adsorption results proved that both the specific surface area and pore volume of the GNS exfoliated by thermal expansion are larger than those by microwave irradiation. And the surface morphology was observed by scanning electron microscopy and transmission electron microscopy. The electrochemical performance of the graphene nanosheets were comparatively tested by cyclic voltammetry and galvanostatic discharge-charge tests. The GNS via thermal expansion exhibited better electrochemical property with the specific capacity of 188 F/g at the current density of 0.1 A/g.

Facile Synthesis of Tremella-Like Li3V2(PO4)3/C Composite Cathode Materials Based on Oroxylum for Use in Lithium-Ion Batteries

2020 ◽  
Vol 20 (3) ◽  
pp. 1962-1967
Author(s):  
Zhen Liu ◽  
Wei Zhou ◽  
Guilin Zeng ◽  
Yuling Zhang ◽  
Zebin Wu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cathode Materials ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Composite Cathode ◽  
Potential Range ◽  
X Ray Diffraction ◽  
Immersion Method ◽  
X Ray ◽  
Transmission Electron

Oroxylum as a traditional Chinese medicine, was used as a green and novel bio-template to synthesize tremella-like Li3V2(PO4)3/C composite (LVPC) cathode materials by adopting a facile immersion method. The microstructures were analyzed by X-ray diffraction analysis, scanning electron microscopy, and transmission electron microscopy. The electrochemical properties were investigated by galvanostatic charge–discharge experiments. The LVPC revealed specific capacity of 95 mAh·g-1 at 1 C rate within potential range of 3.0–4.3 V. After 100 cycles at 0.2 C, the retention of discharge capacity was 96%. The modified electrochemical performance is mainly resulted from the distinct tremella-like structure.

Synthesis of MoO3/V2O5/C Composite as Novel Anode for Li-Ion Battery Application

2020 ◽  
Vol 20 (5) ◽  
pp. 2911-2916
Author(s):  
Zhen Zhang ◽  
Xiao Chen ◽  
Guangxue Zhang ◽  
Chuanqi Feng
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Li Ion ◽  
Battery Application

The MoO3/V2O5/C, MoO3/C and V2O5/C are synthesized by electrospinning combined with heat treatment. These samples are characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and thermogravimetric analysis (TG) techniques. The results show that sample MoO3/V2O5/C is a composite composed from MoO3, V2O5 and carbon. It takes on morphology of the nanofibers with the diameter of 200~500 nm. The TG analysis result showed that the carbon content in the composite is about 40.63%. Electrochemical properties for these samples are studied. When current density is 0.2 A g−1, the MoO3/V2O5/C could retain the specific capacity of 737.6 mAh g−1 after 200 cycles and its coulomb efficiency is 92.99%, which proves that MoO3/V2O5/C has better electrochemical performance than that of MoO3/C and V2O5/C. The EIS and linear Warburg coefficient analysis results show that the MoO3/V2O5/C has larger Li+ diffusion coefficient and superior conductivity than those of MoO3/C or V2O5/C. So MoO3/V2O5/C is a promising anode material for lithium ion battery application.

Effect of Nano TiO2 Coating on Electrochemical Performance of the Li1.2Mn0.6Ni0.2O2 Cathode Materials

2014 ◽  
Vol 1035 ◽  
pp. 361-365 ◽  
Author(s):  
Jian Chen LI ◽  
Sheng Li Pang ◽  
Xiang Qian Shen ◽  
Xiao Ming Xi ◽  
Da Qian Liao
Keyword(s):  
Electron Microscopy ◽  
Electrochemical Performance ◽  
Cathode Material ◽  
Electrochemical Techniques ◽  
Cycling Performance ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Surface ◽  
Bulk Structure

In this paper, a Li-rich cathode material Li1.2Mn0.6Ni0.2O2is modified by the nanoscale TiO2coating using a simple and controllable hydrolyzation method. The effect of nanoscale TiO2coating on the bulk structure, surface morphology and electrochemical performance are characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and electrochemical techniques, respectively. The results show that the nanosize TiO2can be well coated on the surface of the cathode material. The coating layers have no influence on the bulk structure of the cathode material, while they can improve the initial discharge capacity, columbic efficiency and cycling performance.

Effect of Carbonaceous Materials on the Electrochemical Performance of Fe2O3/C as an Anode Material for Lithium-Ion Secondary Batteries

2015 ◽  
Vol 778 ◽  
pp. 83-87
Author(s):  
Dan Yang Su ◽  
Jing Wang ◽  
Wen Ping Tong ◽  
Xiao Shi Dong ◽  
Run Kai Zhou ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacity ◽  
Three Dimensional ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Research Field ◽  
X Ray Diffraction ◽  
High Specific Capacity ◽  
Dimensional Network ◽  
Oxide Anode

The iron oxide anode materials have attracted widespread attention in lithium-ion battery research field. The Fe2O3/C composite was synthesized via hydrothermal method and characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The XRD confirmed that the main crystallization phases of materials were Fe2O3. The Fe2O3/AC powders showed very uniform cube between 1 and 2 μm. Fe2O3/CNTs composites acted as a three-dimensional network wiring to connect Fe2O3 spheres. The electrochemical investigation indicated that the electrochemical performance of Fe2O3/CNTs materials shows a high specific capacity and an excellent cycling stability. The first reversible capacity of samples is 808.8 mAhg-1 at the current density of 100 mAg-1 between 0.01 and 2.5 V vs. Li/Li+.

Synthesis and Electrochemical Performance of Tin-Copper Nanocomposites as a Superior Anode for Lithium-Ion Batteries

2016 ◽  
Vol 852 ◽  
pp. 894-900
Author(s):  
Tian Chen ◽  
Jin Pan ◽  
Ren Cheng Shen ◽  
Jian Qiu Deng ◽  
Qing Rong Yao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electrochemical Impedance ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Cycling Performance ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
High Resolution Tem

The Sn–Cu nanocomposites composing of Sn, Cu6Sn5, Cu3Sn and SnO2 are synthesized by a facile precipitation method. Their morphologies and structures are characterized using X-ray diffraction (XRD) technique, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution TEM. The electrochemical properties are investigated by charge–discharge testing, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. The sample with a Sn/Cu ratio of 5:3 delivers good cycling stability. The discharge specific capacity is 447.5 mAhg-1 after 70 cycles at a current density of 100 mAg-1 and the coulombic efficiency is beyond 95%. The superior rate and cycling performance of Sn–Cu nanocomposites are also demonstrated, which may be rooted in their nanostructure and phase composition.

Sign in / Sign up

Export Citation Format

Share Document