Effects of parameters on titanium nitride formation at atomic level

Author(s):  
Yanan Lv ◽  
Dong Chen

The effects of parameters on nanoscale titanium nitride during the formation process in ferrite were studied via the molecular dynamics (MD) simulation. The formation of titanium nitride was executed by employing a dislocation-motivated formation model in which the atomic diffusion has a significant contribution. The roles of N/Ti atom ratio, temperature and matrix defect were identified and the according nitride formation property was analyzed.

2020 ◽  
Vol 34 (10) ◽  
pp. 2050099
Author(s):  
Yanan Lv ◽  
Dong Chen

Molecular dynamics simulation was adopted to investigate the nanoscale titanium nitride formation at the early formation stage in high-strength low-alloy steel. During the cluster formation process, the nitride clusters were formed through the atom aggregation. The atomic interactions of titanium and nitride atoms were revealed and the cluster property was discussed. The nanoscale titanium nitride clusters own a wide composition, and the cluster formation mechanism was concluded.


1996 ◽  
Vol 428 ◽  
Author(s):  
Hanchen Huang ◽  
T. Diaz de la Rubia ◽  
M. J. Fluss

AbstractWe present results of molecular dynamics (MD) simulation studies of Cu segregation to the Σ11 grain boundary (GB) in Al. The simulations were performed with Embedded Atom Method (EAM) potentials for Al and Al-Cu. The results predict that copper atoms tend to order along either side of the interface even at the pure symmetrical GB, forming alternating chains along the direction. The nucleation of the chains is driven by a change in the local atomic level stress induced by the pre-existing Cu atoms at the GB.


Author(s):  
Salam Pradeep Singh ◽  
Iftikar Hussain ◽  
Bolin Kumar Konwar ◽  
Ramesh Chandra Deka ◽  
Chingakham Brajakishor Singh

Aim and Objective: To evaluate a set of seventy phytochemicals for their potential ability to bind the inhibitor of nuclear factor kappaB kinase beta (IKK-β) which is a prime target for cancer and inflammatory diseases. Materials and Methods: Seventy phytochemicals were screened against IKK-β enzyme using DFT-based molecular docking technique and the top docking hits were carried forward for molecular dynamics (MD) simulation protocols. The adme-toxicity analysis was also carried out for the top docking hits. Results: Sesamin, matairesinol and resveratrol were found to be the top docking hits with a total score of -413 kJ/mol, -398.11 kJ/mol and 266.73 kJ/mol respectively. Glu100 and Gly102 were found to be the most common interacting residues. The result from MD simulation observed a stable trajectory with a binding free energy of -107.62 kJ/mol for matairesinol, -120.37 kJ/mol for sesamin and -40.56 kJ/mol for resveratrol. The DFT calculation revealed the stability of the compounds. The ADME-Toxicity prediction observed that these compounds fall within the permissible area of Boiled-Egg and it does not violate any rule for pharmacological criteria, drug-likeness etc. Conclusion: The study interprets that dietary phytochemicals are potent inhibitors of IKK-β enzyme with favourable binding affinity and less toxic effects. In fact, there is a gradual rise in the use of plant-derived molecules because of its lesser side effects compared to chemotherapy. The study has also provided an insight by which the phytochemicals inhibited the IKK-β enzyme. The investigation would also provide in understanding the inhibitory mode of certain dietary phytochemicals in treating cancer.


2020 ◽  
Vol 18 (1) ◽  
pp. 69-76
Author(s):  
Qiang Wang ◽  
Qizhong Tang ◽  
Sen Tian

AbstractMolecular dynamics (MD) analysis of methane hydrate is important for the application of methane hydrate technology. This study investigated the microstructure changes of sI methane hydrate and the laws of stress–strain evolution under the condition of compression and tension by using MD simulation. This study further explored the mechanical property and stability of sI methane hydrate under different stress states. Results showed that tensile and compressive failures produced an obvious size effect under a certain condition. At low temperature and high pressure, most of the clathrate hydrate maintained a stable structure in the tensile fracture process, during which only a small amount of unstable methane broke the structure, thereby, presenting a free-motion state. The methane hydrate cracked when the system reached the maximum stress in the loading process, in which the maximum compressive stress is larger than the tensile stress under the same experimental condition. This study provides a basis for understanding the microscopic stress characteristics of methane hydrate.


Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1088 ◽  
Author(s):  
Yang Kang ◽  
Dunhong Zhou ◽  
Qiang Wu ◽  
Fuyan Duan ◽  
Rufang Yao ◽  
...  

The physical properties—including density, glass transition temperature (Tg), and tensile properties—of polybutadiene (PB), polystyrene (PS) and poly (styrene-butadiene-styrene: SBS) block copolymer were predicted by using atomistic molecular dynamics (MD) simulation. At 100 K, for PB and SBS under uniaxial tension with strain rate ε ˙ = 1010 s−1 and 109 s−1, their stress–strain curves had four features, i.e., elastic, yield, softening, and strain hardening. At 300 K, the tensile curves of the three polymers with strain rates between 108 s−1 and 1010 s−1 exhibited strain hardening following elastic regime. The values of Young’s moduli of the copolymers were independent of strain rate. The plastic modulus of PS was independent of strain rate, but the Young’s moduli of PB and SBS depended on strain rate under the same conditions. After extrapolating the Young’s moduli of PB and SBS at strain rates of 0.01–1 s−1 by the linearized Eyring-like model, the predicted results by MD simulations were in accordance well with experimental results, which demonstrate that MD results are feasible for design of new materials.


1991 ◽  
Vol 46 (7) ◽  
pp. 616-620 ◽  
Author(s):  
Junko Habasaki

MD simulation has been performed to learn the microscopic mechanism of diffusion of ions in the Li2SiO3 system. The motion of lithium ions can be explained by the trapping model, where lithium is trapped in the polyhedron and moves with fluctuation of the coordination number. The mean square displacement of lithium was found to correlate well with the net changes in coordination number.


Sign in / Sign up

Export Citation Format

Share Document