ANALYSIS OF A PHASE-FIELD MODEL FOR TWO-PHASE COMPRESSIBLE FLUIDS

2010 ◽  
Vol 20 (07) ◽  
pp. 1129-1160 ◽  
Author(s):  
EDUARD FEIREISL ◽  
HANA PETZELTOVÁ ◽  
ELISABETTA ROCCA ◽  
GIULIO SCHIMPERNA
Keyword(s):  
Field Model ◽  
Stokes Equations ◽  
Phase Field Model ◽  
Immiscible Fluids ◽  
Compressible Fluids ◽  
Navier Stokes ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Cahn Equation ◽  
System Coupling

A model describing the evolution of a binary mixture of compressible, viscous, and macroscopically immiscible fluids is investigated. The existence of global-in-time weak solutions for the resulting system coupling the compressible Navier–Stokes equations governing the motion of the mixture with the Allen–Cahn equation for the order parameter is proved without any restriction on the size of initial data.

Numerical Modeling of Evolution of Boundary Between Incompressible Gas and Liquid in Two-Dimensional Region

2006 ◽  
Vol 4 ◽  
pp. 224-236
Author(s):  
A.S. Topolnikov
Keyword(s):  
Numerical Modeling ◽  
Interphase Boundary ◽  
Incompressible Liquid ◽  
Stokes Equations ◽  
Numerical Code ◽  
Navier Stokes ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Incompressible Media ◽  
Good Agreement

The paper is devoted to numerical modeling of Navier–Stokes equations for incompressible media in the case, when there exist gas and liquid inside the rectangular calculation region, which are separated by interphase boundary. The set of equations for incompressible liquid accounting for viscous, gravitational and surface (capillary) forces is solved by finite-difference scheme on the spaced grid, for description of interphase boundary the ideology of Level Set Method is used. By developed numerical code the set of hydrodynamic problems is solved, which describe the motion of two-phase incompressible media with interphase boundary. As a result of numerical simulation the solutions are obtained, which are in good agreement with existing analytical and experimental solutions.

Pontryagin maximum principle and second order optimality conditions for optimal control problems governed by 2D nonlocal Cahn–Hilliard–Navier–Stokes equations

Analysis ◽  
2020 ◽  
Vol 40 (3) ◽  
pp. 127-150
Author(s):  
Tania Biswas ◽  
Sheetal Dharmatti ◽  
Manil T. Mohan
Keyword(s):  
Optimal Control ◽  
Optimal Control Problem ◽  
Control Problem ◽  
Stokes Equations ◽  
Minimum Principle ◽  
Immiscible Fluids ◽  
Second Order ◽  
Navier Stokes ◽  
Distributed Optimal Control ◽  
Navier Stokes Equations

AbstractIn this paper, we formulate a distributed optimal control problem related to the evolution of two isothermal, incompressible, immiscible fluids in a two-dimensional bounded domain. The distributed optimal control problem is framed as the minimization of a suitable cost functional subject to the controlled nonlocal Cahn–Hilliard–Navier–Stokes equations. We describe the first order necessary conditions of optimality via the Pontryagin minimum principle and prove second order necessary and sufficient conditions of optimality for the problem.

NUMERICAL SIMULATION OF ISOTHERMAL AND THERMAL TWO-PHASE FLOWS USING PHASE-FIELD MODELING

2007 ◽  
Vol 18 (04) ◽  
pp. 536-545 ◽  
Author(s):  
NAOKI TAKADA ◽  
AKIO TOMIYAMA
Keyword(s):  
Phase Field ◽  
Stokes Equations ◽  
Density Ratio ◽  
Navier Stokes ◽  
Phase Field Modeling ◽  
Two Phase Flows ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Field Modeling ◽  
High Density Ratio

For interface-tracking simulation of two-phase flows in various micro-fluidics devices, we examined the applicability of two versions of computational fluid dynamics method, NS-PFM, combining Navier-Stokes equations with phase-field modeling for interface based on the van der Waals-Cahn-Hilliard free-energy theory. Through the numerical simulations, the following major findings were obtained: (1) The first version of NS-PFM gives good predictions of interfacial shapes and motions in an incompressible, isothermal two-phase fluid with high density ratio on solid surface with heterogeneous wettability. (2) The second version successfully captures liquid-vapor motions with heat and mass transfer across interfaces in phase change of a non-ideal fluid around the critical point.

scholarly journals A ternary Cahn–Hilliard–Navier–Stokes model for two-phase flow with precipitation and dissolution

2020 ◽  
pp. 1-35
Author(s):  
Christian Rohde ◽  
Lars von Wolff
Keyword(s):  
Phase Field ◽  
Stokes Equations ◽  
Solid Phase ◽  
Immiscible Fluids ◽  
Sharp Interface ◽  
Ion Concentration ◽  
Navier Stokes ◽  
Interface Model ◽  
Sharp Interface Model ◽  
Two Phase

We consider the incompressible flow of two immiscible fluids in the presence of a solid phase that undergoes changes in time due to precipitation and dissolution effects. Based on a seminal sharp interface model a phase-field approach is suggested that couples the Navier–Stokes equations and the solid’s ion concentration transport equation with the Cahn–Hilliard evolution for the phase fields. The model is shown to preserve the fundamental conservation constraints and to obey the second law of thermodynamics for a novel free energy formulation. An extended analysis for vanishing interfacial width reveals that in this limit the sharp interface model is recovered, including all relevant transmission conditions. Notably, the new phase-field model is able to realize Navier-slip conditions for solid–fluid interfaces in the limit.

scholarly journals Do the Volume-of-Fluid and the Two-Phase Euler Compete for Modeling a Spillway Aerator?

Water ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3092
Author(s):  
Lourenço Sassetti Mendes ◽  
Javier L. Lara ◽  
Maria Teresa Viseu
Keyword(s):  
Stokes Equations ◽  
Cost Benefit ◽  
Volume Of Fluid ◽  
Navier Stokes ◽  
Type Model ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Entrained Air ◽  
Computational Resources ◽  
Mesh Convergence

Spillway design is key to the effective and safe operation of dams. Typically, the flow is characterized by high velocity, high levels of turbulence, and aeration. In the last two decades, advances in computational fluid dynamics (CFD) made available several numerical tools to aid hydraulic structures engineers. The most frequent approach is to solve the Reynolds-averaged Navier–Stokes equations using an Euler type model combined with the volume-of-fluid (VoF) method. Regardless of a few applications, the complete two-phase Euler is still considered to demand exorbitant computational resources. An assessment is performed in a spillway offset aerator, comparing the two-phase volume-of-fluid (TPVoF) with the complete two-phase Euler (CTPE). Both models are included in the OpenFOAM® toolbox. As expected, the TPVoF results depend highly on the mesh, not showing convergence in the maximum chute bottom pressure and the lower-nappe aeration, tending to null aeration as resolution increases. The CTPE combined with the k–ω SST Sato turbulence model exhibits the most accurate results and mesh convergence in the lower-nappe aeration. Surprisingly, intermediate mesh resolutions are sufficient to surpass the TPVoF performance with reasonable calculation efforts. Moreover, compressibility, flow bulking, and several entrained air effects in the flow are comprehended. Despite not reproducing all aspects of the flow with acceptable accuracy, the complete two-phase Euler demonstrated an efficient cost-benefit performance and high value in spillway aerated flows. Nonetheless, further developments are expected to enhance the efficiency and stability of this model.

Modeling of Cell Motion in Micro-Scale Hydrodynamic-Electrical Field

2009 ◽  
Vol 74 ◽  
pp. 139-142
Author(s):  
Ting Ye ◽  
Hua Li
Keyword(s):  
Stokes Equations ◽  
Elastic Shell ◽  
Practical Significance ◽  
Cell Manipulation ◽  
Navier Stokes ◽  
Phase System ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Maxwell Stress Tensor ◽  
Cell Motion

A modeling of two-phase system is presented for investigation of the cell motion and deformation in the microchannel subject to the mechanical and electrical coupled forces. In order to evaluate the mechanical force developed by cell membrane, it is treated as an incompressible and elastic shell with uniform thickness capable of shearing and bending deformation. Due to the irregular and complex cell configuration after deformation, the Maxwell stress tensor (MST) method is successfully employed to analyze the dielectrophoretic force. The modified particle binary level set (MPBLS) method is presented to accurately track the moving interface between the two phases, which is vital for a modeling of two-phase system. Afterwards the modified SIMPLER coupled with SIMPLEC is used to numerically solve the incompressible Navier-Stokes equations governing the entire flow field. On basis of the series of methods, the motion and deformation of red blood cell (RBC) in the microchannel under the mechanical and electrical forces are simulated to demonstrate the deformation process and the moving trajectory of RBC. The present study is not only of great value for deeper understanding of some diseases caused by cell abnormality, but also of practical significance for cell manipulation and separation.

scholarly journals Phase-field model for the Rayleigh–Taylor instability of immiscible fluids

2009 ◽  
Vol 622 ◽  
pp. 115-134 ◽  
Author(s):  
ANTONIO CELANI ◽  
ANDREA MAZZINO ◽  
PAOLO MURATORE-GINANNESCHI ◽  
LARA VOZELLA
Keyword(s):  
Phase Field ◽  
Field Model ◽  
Stokes Equations ◽  
Phase Field Model ◽  
Terminal Velocity ◽  
Immiscible Fluids ◽  
Taylor Instability ◽  
Upper And Lower Bounds ◽  
Weakly Nonlinear ◽  
Rayleigh Taylor Instability

The Rayleigh–Taylor instability of two immiscible fluids in the limit of small Atwood numbers is studied by means of a phase-field description. In this method, the sharp fluid interface is replaced by a thin, yet finite, transition layer where the interfacial forces vary smoothly. This is achieved by introducing an order parameter (the phase-field) continuously varying across the interfacial layers and uniform in the bulk region. The phase-field model obeys a Cahn–Hilliard equation and is two-way coupled to the standard Navier–Stokes equations. Starting from this system of equations we have first performed a linear analysis from which we have analytically rederived the known gravity–capillary dispersion relation in the limit of vanishing mixing energy density and capillary width. We have performed numerical simulations and identified a region of parameters in which the known properties of the linear phase (both stable and unstable) are reproduced in a very accurate way. This has been done both in the case of negligible viscosity and in the case of non-zero viscosity. In the latter situation, only upper and lower bounds for the perturbation growth rate are known. Finally, we have also investigated the weakly nonlinear stage of the perturbation evolution and identified a regime characterized by a constant terminal velocity of bubbles/spikes. The measured value of the terminal velocity is in agreement with available theoretical prediction. The phase-field approach thus appears to be a valuable technique for the dynamical description of the stages where hydrodynamic turbulence and wave-turbulence come into play.

Sign in / Sign up

Export Citation Format

Share Document