SYNTHESIS OF CROSS Bi2 WO6 MICROWAFERS WITH ENHANCED PHOTOCATALYTIC ACTIVITY UNDER VISIBLE LIGHT IRRADIATION

2012 ◽  
Vol 19 (01) ◽  
pp. 1250005 ◽  
Author(s):  
GUIZHEN WANG ◽  
GENGPING WAN ◽  
SHIWEI LIN
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance Spectrum ◽  
Orthorhombic Phase ◽  
Transmission Electron ◽  
Light Region ◽  
Uv Visible ◽  
Visible Diffuse Reflectance Spectrum ◽  
Better Than

Novel cross Bi2 WO6 microwafers have been fabricated by a facile acetone-assisted solvothermal method in high quantity. The structure characterizations of the microwafers were investigated in detail by means of X-ray powder diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. The results indicate that the orthorhombic phase of Bi2 WO6 with high crystallinity can be obtained and each microwafer is polycrystalline in nature and organized by the nanoflake subunits. UV-visible diffuse reflectance spectrum of the prepared Bi2 WO6 microwafers demonstrates that they have absorption in the visible light region. The photocatalytic activity of cross Bi2 WO6 microwafers toward (Rhodamine B) RhB degradation under visible light was investigated, and it was found to be significantly better than that of Bi2 WO6 sample prepared by solid-state reaction (SSR-Bi2 WO6) .

SYNTHESIS OF Bi2WO6 MICROSPHERES WITH VISIBLE-LIGHT-DRIVEN PHOTOCATALYTIC PROPERTIES

2013 ◽  
Vol 12 (05) ◽  
pp. 1350035 ◽  
Author(s):  
GENGPING WAN ◽  
GUIZHEN WANG
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Large Scale ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Light Region ◽  
Visible Light Driven ◽  
Uv Visible

Bi 2 WO 6 microspheres constructed from nanosheets have been synthesized by a controllable solvothermal route in a large scale. The structure characterizations of the microspheres were investigated in detail by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). On the basis of XRD analysis and SEM observation of the products at different reaction time periods, a growth mechanism of Bi 2 WO 6 microspheres was proposed. UV-Visible diffuse reflectance (DR) spectrum of the prepared Bi 2 WO 6 microspheres demonstrates that they have absorption in the visible light region. The photocatalytic activity of Bi 2 WO 6 microspheres toward Rhodamine-B ( RhB ) degradation was investigated and the as-prepared products exhibited good photocatalytic activity in degradation of RhB under 300 W Xe lamp light irradiation.

PEG-Assisted Hydrothermal Synthesis and Photocatalytic Activity of Bi2Fe4O9 Crystallites

2011 ◽  
Vol 1292 ◽  
Author(s):  
Dengrong Cai ◽  
Jianmin Li ◽  
Shundong Bu ◽  
Shengwen Yu ◽  
Dengren Jin ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance Spectrum ◽  
X Ray Diffraction ◽  
Hydrothermal Route ◽  
Peg 400 ◽  
Transmission Electron ◽  
Light Region ◽  
Facile Hydrothermal Route ◽  
Degradation Ratio

ABSTRACTA facile hydrothermal route assisted by polyethylene glycol (PEG) 400 was utilized to synthesize single-phase Bi2Fe4O9 crystallites. X-ray diffraction results showed the products with PEG 400 of 30 g/L exhibited a preferred growth along the (001) plane. Transmission electron microscopy indicated that the morphology of the as-prepared Bi2Fe4O9 crystallites with PEG 400 were plake-like and rod-like. Strong absorption in visible-light region of the products was characterized by UV-vis diffuse reflectance spectrum (UV-DRS). The photocatalytic activity of Bi2Fe4O9 crystallites was evaluated on degradation of methyl orange (MO) under visible light irradiation. For 3 h irradiation, the degradation ratio was increased to 93% with the aid of a small amount of H2O2. The analysis of FT-IR spectra proved that the Bi2Fe4O9 catalysts were remained stable after the photocalytic reactions.

Novel p–n junction UiO-66/BiOI photocatalysts with efficient visible-light-induced photocatalytic activity

2018 ◽  
Vol 77 (5) ◽  
pp. 1441-1448 ◽  
Author(s):  
Yuejin Li ◽  
Xili Shang ◽  
Changhai Li ◽  
Xiaoming Huang ◽  
Jingjing Zheng
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Salicylic Acid ◽  
Visible Light ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Uv Visible ◽  
Adsorption Desorption ◽  
Junction Structure ◽  
First Time

Abstract Novel visible-light-induced UiO-66/BiOI photocatalysts with a p–n junction structure have been prepared for the first time through a facile hydrothermal method. The prepared photocatalysts were characterized using the powder X-ray diffraction, high resolution transmission electron microscopy, scanning electron microscopy, UV–visible diffuse reflectance spectra, and N2 adsorption–desorption (Brunauer–Emmett–Teller) techniques respectively. The photodegradation performances of UiO-66/BiOI photocatalysts were evaluated by photodegrading salicylic acid under visible-light irradiation. The UiO-66/BiOI composites displayed much higher photocatalytic efficiencies than pure BiOI under visible light. When the content of UiO-66 was 5.2 wt%, the composite (UiO-66/BiOI-2) has the best photocatalytic activity. Most of the salicylic acid molecules can be degraded in 100 min. The degradation rate of UiO-66/BiOI-2 samples is higher than single BiOI and UiO-66. The enhanced photocatalytic performance of UiO-66/BiOI may be ascribed to the formation of p–n heterojunctions between BiOI and UiO-66, which facilitates the transfer and separation of the photogenerated charge carriers. After recycling of the photocatalyst for five times for the photodegradation of salicylic acid, more than 85% of salicylic acid could still be degraded in the fifth cycle, implying that the as-prepared photocatalysts are highly stable.

Fabrication of CaFe2O4 nanofibers via electrospinning method with enhanced visible light photocatalytic activity

2017 ◽  
Vol 10 (05) ◽  
pp. 1750058 ◽  
Author(s):  
Jianmin Wang ◽  
Yunan Wang ◽  
Yinglei Liu ◽  
Song Li ◽  
Feng Cao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Performance ◽  
Diffuse Reflectance Spectrum ◽  
Charge Transfer Resistance ◽  
Transfer Resistance ◽  
Transmission Electron ◽  
Electrospinning Method ◽  
Low Charge

CaFe2O4 nanofibers with diameters of about 130[Formula: see text]nm have been fabricated via a facile electrospinning method. The structures, morphologies and optical properties of the obtained CaF2O4 nanofibers have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–Visible UV–Vis diffuse reflectance spectrum. The photocatalytic activities of the CaFe2O4 nanofibers are evaluated by the photo-degradation of Methyl orange (MO). The results show that the CaFe2O4 nanofibers (72%) exhibit much higher photocatalytic performance than the CaFe2O4 powders (27%) prepared by conventional method under visible light irradiation. The enhanced photocatalytic performance of CaFe2O4 nanofibers could be attributed to the large surface area, high photogenerated charge carriers density and low charge transfer resistance, as revealed by photoelectrochemical measurement. And fundamentally, it could be attributed to the decreased particle size and the fibrous nanostructure. This work not only provides an efficient way to improve the photocatalytic activity of CaFe2O4, but also provides a new method for preparing materials with nanofibrous structure.

Few-Layered MoS2 Nanostructures for Highly Efficient Visible Light Photocatalysis

NANO ◽  
2016 ◽  
Vol 11 (10) ◽  
pp. 1650114 ◽  
Author(s):  
Dan Li ◽  
Jianwei Li ◽  
Caiqin Han ◽  
Xinsheng Zhao ◽  
Haipeng Chu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Electrochemical Impedance ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
Electrochemical Impedance Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Electron Hole Pair

Few-layered MoS2 nanostructures were successfully synthesized by a simple hydrothermal method without the addition of any catalysts or surfactants. Their morphology, structure and photocatalytic activity were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, electrochemical impedance spectra and UV-Vis absorption spectroscopy, respectively. These results show that the MoS2 nanostructures synthesized at 180[Formula: see text]C exhibit an optimal visible light photocatalytic activity (99%) in the degradation of Rhodamine B owing to the relatively easier adsorption of pollutants, higher visible light absorption and lower electron–hole pair recombination.

scholarly journals Synthesis of TiO2/Pd and TiO2/PdO Hollow Spheres and Their Visible Light Photocatalytic Activity

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Jing Yan ◽  
Xiaojuan Li ◽  
Bo Jin ◽  
Min Zeng ◽  
Rufang Peng
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Degradation ◽  
Diffuse Reflectance Spectroscopy ◽  
Hollow Spheres ◽  
Active Species ◽  
Degradation Efficiency ◽  
Diffraction Field ◽  
Transmission Electron

A series of TiO2, TiO2/Pd, and TiO2/PdO hollow sphere photocatalysts was successfully prepared via a combination of hydrothermal, sol-immobilization, and calcination methods. The structure and optical properties of the as-prepared samples were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Telleranalysis, Barrett-Joyner-Halenda measurement, and UV-Vis diffuse reflectance spectroscopy. The photocatalysis efficiencies of all samples were evaluated through the photocatalytic degradation of rhodamine B under visible light irradiation. Results indicated that TiO2/PdO demonstrated a higher photocatalytic activity (the photocatalytic degradation efficiency could reach up to 100% within 40 min) than the other samples and could maintain a stable photocatalytic degradation efficiency for at least four cycles. Finally, after using different scavengers, superoxide and hydroxyl radicals were identified as the primary active species for the effectiveness of the TiO2/PdO photocatalyst.

scholarly journals Incorporation of reduced graphene oxide into faceted flower-like {001} TiO 2 for enhanced photocatalytic activity

2018 ◽  
Vol 5 (8) ◽  
pp. 180613 ◽  
Author(s):  
Haijin Liu ◽  
Peiyao Li ◽  
Haokun Bai ◽  
Cuiwei Du ◽  
Dandan Wei ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Graphene Oxide ◽  
Visible Light ◽  
Reduced Graphene Oxide ◽  
Theoretical Calculations ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Photocatalytic Activities

Anatase TiO 2 with {001} facets is much more active than that with {101} facets, which has been verified via experiments and theoretical calculations. Graphene has garnered much attention since it was initially synthesized, due to its unique properties. In this study, reduced graphene oxide (RGO)/{001} faceted TiO 2 composites were fabricated via a solvothermal method. The composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectrophotometry, photoluminescence and Raman analysis. The results revealed that the graphene oxide was reduced during the preparation process of the {001} faceted TiO 2 , and combined with the surface of {001} TiO 2 . The photocatalytic activities of the composites were evaluated through the degradation of basic violet, under both white light ( λ > 390 nm) and visible light ( λ = 420 nm) irradiation. The results indicated that the photocatalytic activities of the {001} faceted TiO 2 were significantly improved following the incorporation of RGO, particularly under visible light irradiation. Theoretical calculations showed that the band structure of the {001} faceted TiO 2 was modified via graphene hybridization, where the separation of photoinduced electron–hole pairs was promoted; thus, the photocatalytic activity was enhanced.

Photocatalysis Reactivity in the Visible Light of B-Doped TiO2 Nanotube Arrays

2013 ◽  
Vol 860-863 ◽  
pp. 907-910
Author(s):  
Xiao Xia Lin ◽  
Jia Liu ◽  
De Gang Fu
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectrum ◽  
Nanotube Arrays ◽  
X Ray Diffraction ◽  
Degradation Model ◽  
X Ray ◽  
Light Region

B-doped TiO2nanotube arrays (B-TNTs) were synthesized by anodization method combined with dip-calcination technique. The physicochemical properties and surface morphology were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and UV-Vis diffuse reflectance spectrum (DRS). Methyl blue (MB) solution was utilized as the degradation model to evaluate the photocatalytic activity of B-TNTs under visible light irradiation. The results show B-TNTs shifts the absorption edge of TiO2nanotube arrays to the visible light region and B-TNTs displays higher photocatalytic activity compared with undoped TNTs.

Hydrothermal Synthesis of Visible Light Active SnO2-SnS2 Nanocomposite Photocatalyst for the Reduction of Cr(VI) in Water

2013 ◽  
Vol 709 ◽  
pp. 7-10
Author(s):  
Jing Li ◽  
Xi Hua Du ◽  
Wei Min Dai ◽  
Yong Cai Zhang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Sno2 Nanoparticles ◽  
High Photocatalytic Activity ◽  
X Ray ◽  
Transmission Electron ◽  
Visible Light Active ◽  
Composition Structure

A low temperature (130 °C) hydrothermal method was proposed for the synthesis of SnO2-SnS2 nanocomposite. The composition, structure and optical property of the as-synthesized SnO2-SnS2 nanocomposite were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy, high-resolution transmission electron microscopy and UV-vis diffuse reflectance spectra, and its photocatalytic activity was tested by the reduction of Cr(VI) in water under visible light (λ > 420 nm) irradiation. It was found that the as-synthesized SnO2-SnS2 nanocomposite exhibited high photocatalytic activity in the reduction of Cr(VI) in water under visible light (λ > 420 nm) irradiation, whereas SnO2 nanoparticles displayed no photocatalytic activity in the reduction of Cr(VI) in water under visible light (λ > 420 nm) irradiation.

Hydrothermal Synthesis and Photocatalytic Properties of TiO2/SnS2 Nanocomposite

2014 ◽  
Vol 898 ◽  
pp. 23-26
Author(s):  
Jing Li ◽  
Wei Sun ◽  
Wei Min Dai ◽  
Yong Cai Zhang
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Photocatalytic Property ◽  
Deionized Water ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Chloride Pentahydrate

TiO2/SnS2 nanocomposite was synthesized via hydrothermal treatment of tin (IV) chloride pentahydrate, thioacetamide and TiO2 nanotubes in deionized water at 150 °C for 3 h. The structure, composition and optical property of the as-synthesized nanocomposite were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and UV-vis diffuse reflectance spectra, and its photocatalytic property was tested in the reduction of aqueous Cr6+ under visible-light (λ > 420 nm) irradiation. It was observed that TiO2 nanotubes exhibited no photocatalytic activity, whereas TiO2/SnS2 nanocomposite exhibited photocatalytic activity in the reduction of aqueous Cr6+ under visible-light (λ > 420 nm) irradiation.

Sign in / Sign up

Export Citation Format

Share Document