INFLUENCE OF HIGH INITIAL ISOLATOR STIFFNESS ON THE SEISMIC RESPONSE OF A BASE-ISOLATED BENCHMARK BUILDING

2011 ◽  
Vol 11 (06) ◽  
pp. 1201-1228 ◽  
Author(s):  
AJAY SHARMA ◽  
R. S. JANGID
Keyword(s):  
Degrees Of Freedom ◽  
Base Isolation ◽  
Near Field ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Time History ◽  
Base Shear ◽  
Isolation System ◽  
Base Displacement ◽  
Floor Acceleration

The influence of high initial isolator stiffness on the response of a base-isolated benchmark building is investigated. The base-isolated building is modeled as a three-dimensional linear-elastic structure having three degrees-of-freedom at each floor level. The time-history analysis of this building is carried out by solving the governing equations of motion using Newmark-beta method along with an iterative predictor–corrector approach. The force–deformation behavior of the isolation system is modeled by a bilinear law, which can be effectively used to model all isolation systems in practice. Three near-field earthquakes with bidirectional ground motions are considered. Structural response parameters such as absolute top floor acceleration, base shear, and base displacement are chosen for investigating the effects of high initial isolator stiffness. It was observed that the high initial isolator stiffness of the isolation system excites the higher modes in the base-isolated building and increases the top floor acceleration. Such a phenomenon can be detrimental to the sensitive instruments placed in the isolated structure. On the other hand, both the base displacement and base shear reduce marginally due to increase in the initial isolator stiffness. Further, the influences of high initial isolator stiffness are found to dependent on the period and characteristic strengths of the base isolation system.

scholarly journals Mitigation of Earthquake Responses Using SMA Supplemented Base-Isolation Devices for Benchmark Building

2021 ◽  
Vol 2 (4) ◽  
pp. 22-30
Author(s):  
Ashish R. Akhare
Keyword(s):  
Degrees Of Freedom ◽  
Base Isolation ◽  
Near Field ◽  
Evaluation Criteria ◽  
Time History ◽  
Base Shear ◽  
Comparative Performance ◽  
Isolation System ◽  
Seismic Control ◽  
Isolation Systems

The efficiency of traditional isolation bearings is doubted for near-field earthquakes because these bearings undergo large displacement. A comparative study of different base isolation systems of base-isolated benchmark building is carried out in the present study. The study is based on assumption that buildings are bi-directionally acted upon by near-field earthquakes for assessing their relative performance in seismic control of the benchmark building. The time history variations of important response parameters and evaluation criteria of the benchmark building has been studied for assessing the effectiveness of the isolation systems. The Shape Memory Alloy (SMA) is utilized with elastomeric bearings and friction bearings to study the effectiveness of SMA wires with different isolators. The benchmark building is modelled as a discrete linear elastic shear structure having three degrees of- freedom at each floor level. Time domain dynamic analysis of this building has been carried out with the help of constant average acceleration Newmark’s method and equilibrium of non-linear forces has been taken care by fourth order Runge-Kutta method. The comparative performance of various isolation systems has been studied with uniform and hybrid combinations. The hybrid combination of SMA supplemented bearings works out the better isolation system keeping in view of the percentage reduction in evaluation criteria for smart base-isolated benchmark building. Furthermore, it is shown that, the functionality of SMA wire is not efficient with Lead Rubber Bearing system, as it is able to control displacement but increases the acceleration, base shear, story drift and isolation forces.

Dynamic Nonlinear Analysis of an Hybrid Base Isolation System with Viscous Dampers and Friction Sliders in Parallel

2012 ◽  
Vol 234 ◽  
pp. 96-101 ◽  
Author(s):  
Donato Cancellara ◽  
Fabio de Angelis
Keyword(s):  
Nonlinear Analysis ◽  
Base Isolation ◽  
Three Dimensional ◽  
Time History ◽  
Seismic Action ◽  
Viscous Dampers ◽  
Isolation System ◽  
Fixed Base ◽  
Base Isolation System ◽  
Dynamic Nonlinear Analysis

In the present work we have analyzed a particular base isolation system for the seismic protection of a multi-storey reinforced concrete (RC) building. The viscous dampers and friction sliders are the devices adopted in parallel for realizing the base isolation system. The base isolation structure has been designed and verified according to European seismic code EC8 and by considering for the friction sliders the influence of the sliding velocity on the value of the friction coefficient. A dynamic nonlinear analysis for a three-dimensional base isolated structure has been performed. Recorded accelerograms for bi-directional ground motions have been used which comply with the requirements imposed by EC8 for the representation of a seismic action in a time history analysis. In this paper a comparative analysis is presented between the base isolated structure with the described hybrid base isolation system and the traditional fixed base structure.

scholarly journals Seismic Performances of Conventional and LRB-Isolated Buildings Comparing to Seesaw Buildings

2020 ◽  
Vol 10 (1) ◽  
pp. 45-54
Author(s):  
Soroush Kherad ◽  
Mahmood Hosseini ◽  
Mehrtash Motamedi
Keyword(s):  
Base Isolation ◽  
Low Cost ◽  
Time History ◽  
Building Structure ◽  
Base Shear ◽  
Isolation System ◽  
Repair Work ◽  
Story Drift ◽  
Base Isolation System ◽  
Nonlinear Time History

AbstractUsing seesaw structural system equipped with energy dissipating devices has been considered as a low-cost and low-tech way for creation of earthquake-resilient buildings. In this paper by considering three groups of multi-story buildings, including conventional buildings, LRB-based isolated buildings and building with seesaw structure, equipped with a newly introduced type of structural fuses, their seismic performances have been compared through nonlinear time history analyses (NLTHA). The employed fuses in seesaw buildings are a specific type of yielding plate dampers, called Multiple Curved Yielding Plate Energy Dissipater (MCYPED), installed at the bottom of the all circumferential columns of the lowest story of the building. To show the efficiency of the proposed seesaw system in comparison with other two mentioned groups, first, by finite element modeling, verified by experimental results, the initial and secondary stiffness values as well as the yielding and ultimate strengths of the MCYPEDs have been obtained to be modeled by multi-linear plastic springs in the seesaw buildings. Then, a series of NLTHA have been performed on the three groups of buildings by using a set of selected earthquakes. The compared responses include roof displacement and acceleration, base shear, inter-story drift and finally plastic hinges (PHs) formed in the building’s structures. Results show that the proposed seesaw building equipped with MCYPEDs not only results in lower seismic demand, similar to base isolation system, but also leads to remarkable energy dissipation capacity in the building structure at base level, so that the building structure remains basically elastic, and does not need any major repair work, even after large earthquakes, contrary to the conventional building which need to be demolished after the earthquake.

scholarly journals Seismic Vibration Control of Building with Lead Rubber Bearing Isolator

10.29007/pvzx ◽  
2018 ◽  
Author(s):  
Kishan Bhojani ◽  
Vishal Patel ◽  
Snehal Mevada
Keyword(s):  
Seismic Response ◽  
Base Isolation ◽  
Time History ◽  
Dynamic Parameter ◽  
Base Shear ◽  
Maximum Displacement ◽  
Maximum Acceleration ◽  
Isolation System ◽  
Loma Prieta Earthquake ◽  
Base Isolation System

During the life span of structure there may be an effect of vibration. Due to vibration there may be major or minor damage in building. Base isolation is best method to reduce the seismic response of the structure. This paper gives idea about base isolation system which can be used in multi-story building to reduce seismic response of the structure. This paper represents the initialize study of dynamic parameter like effective damping for four earthquake time history. In this paper the optimum effective damping has been found out under the effect of Loma Prieta earthquake time history. The parametric study has been conducted to evaluate the effect on maximum displacement, maximum acceleration, maximum base shear in bare frame and frame with isolator.

A Comparative Study on the Seismic Performance of Superelastic-Friction Base Isolators against Near-Field Earthquakes

2012 ◽  
Vol 28 (3) ◽  
pp. 1147-1163 ◽  
Author(s):  
Osman E. Ozbulut ◽  
Stefan Hurlebaus
Keyword(s):  
Seismic Performance ◽  
Near Field ◽  
Time History ◽  
The Other ◽  
Superior Performance ◽  
Base Shear ◽  
Isolation System ◽  
Pendulum System ◽  
Base Isolator ◽  
Isolation Systems

This paper presents a comparative seismic performance assessment of super-elastic-friction base isolator (S-FBI) systems in improving the response of bridges under near-field earthquakes. The S-FBI system consists of a steel-Teflon sliding bearing and a superelastic shape memory alloy (SMA) device. The other isolation systems considered here are lead rubber bearing (LRB), friction pendulum system (FPS), and resilient-friction base isolator (R-FBI). Each isolation system is designed to provide the same isolation period and characteristic strength. Nonlinear time-history analyses of an isolated bridge are performed to compare the performance of various isolation systems. The results indicate that the S-FBI system shows superior performance in reducing deck displacement response and effectively limits permanent bearing deformation, whereas residual deformations are present for the other isolation systems in some cases. It is also observed that the LRB system has the largest deck drifts while the FPS system and R-FBI system produce the smallest peak deck acceleration and base shear.

Effects of Base Isolation on Multi-Layer and High-Level Framework

2011 ◽  
Vol 255-260 ◽  
pp. 2568-2572
Author(s):  
Hai Qing Liu ◽  
Xiao Guo ◽  
Hao Wang
Keyword(s):  
Seismic Waves ◽  
Base Isolation ◽  
Equations Of Motion ◽  
Time History ◽  
Structural System ◽  
Base Shear ◽  
High Rise ◽  
Isolated Structures ◽  
Rubber Bearings ◽  
High Level

This paper expounded the basic principle of the base-isolated structures. Established the equations of motion of single particle and multi-particle base isolation structural system. Adopted multi-layer and high-level framework groups, added laminated rubber bearings in the bottom respectively, input EL Centro seismic waves, and then the modal, time-history, base shear are compared and analyzed. By comparing the results obtained: base-isolated structure used in high-rise building can decrease a certain degree of the seismic response, in the multi-layer building the effect was more apparent. It also confirmed that the application of base isolation on multi-layer and high-level framework in the existing conditions still had some limitations.

Investigation of Train Dynamics in Passing Through Curves Using a Full Model

Joint Rail ◽  
2004 ◽  
Author(s):  
Mohammad Durali ◽  
Mohammad Mehdi Jalili Bahabadi
Keyword(s):  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Full Model ◽  
Bogie Frame ◽  
Nonlinear Characteristics ◽  
Train Derailment ◽  
Train Dynamics

In this article a train model is developed for studying train derailment in passing through bends. The model is three dimensional, nonlinear, and considers 43 degrees of freedom for each wagon. All nonlinear characteristics of suspension elements as well as flexibilities of wagon body and bogie frame, and the effect of coupler forces are included in the model. The equations of motion for the train are solved numerically for different train conditions. A neural network was constructed as an element in solution loop for determination of wheel-rail contact geometry. Derailment factor was calculated for each case. The results are presented and show the major role of coupler forces on possible train derailment.

Trajectory Tracking of Underactuated Multibody Systems

2011 ◽  
Author(s):  
Stefan Reichl ◽  
Wolfgang Steiner
Keyword(s):  
Trajectory Tracking ◽  
Multibody Systems ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Feedforward Control ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Differential Algebraic Equations ◽  
State Variables ◽  
Algebraic Equations

This work presents three different approaches in inverse dynamics for the solution of trajectory tracking problems in underactuated multibody systems. Such systems are characterized by less control inputs than degrees of freedom. The first approach uses an extension of the equations of motion by geometric and control constraints. This results in index-five differential-algebraic equations. A projection method is used to reduce the systems index and the resulting equations are solved numerically. The second method is a flatness-based feedforward control design. Input and state variables can be parameterized by the flat outputs and their time derivatives up to a certain order. The third approach uses an optimal control algorithm which is based on the minimization of a cost functional including system outputs and desired trajectory. It has to be distinguished between direct and indirect methods. These specific methods are applied to an underactuated planar crane and a three-dimensional rotary crane.

scholarly journals The effect of seismic base isolation on structural response of a 12-story hotel building in Padang, Indonesia

2020 ◽  
Vol 156 ◽  
pp. 05026
Author(s):  
Fauzan ◽  
Afdhalul Ihsan ◽  
Mutia Putri Monika ◽  
Zev Al Jauhari
Keyword(s):  
Base Isolation ◽  
Response Spectrum ◽  
Soft Soil ◽  
Structural Response ◽  
Time History ◽  
Seismic Zone ◽  
Isolation System ◽  
Rubber Bearing ◽  
Seismic Base Isolation ◽  
The City

The amount of potential investment in Padang City, Indonesia since 2017 attracted many investors to contribute to the city. One of the investments is a 12-story hotel that will be constructed in By Pass Street of the city. The hotel is located in a high seismic zone area, so the seismic base isolation has been proposed to be used in the hotel building. The main aim of using a seismic base isolation device is to reduce the inertia forces introduced in the structure due to earthquakes by shifting the fundamental period of the structure out of dangerous resonance range and concentration of the deformation demand at the isolation system. An analytical study on the Reinforced Concrete (RC) hotel building with and without rubber bearing (RB) base isolation is carried out using the response spectrum and time history analysis methods. The results show that internal forces and inter-story drift of the building with high damping rubber bearing (HDRB) are lower than that of the fixed base with a remarkable margin. From this study, it is recommended to use the HDRB base isolation for medium and high rise buildings with soft soil in Padang City, Indonesia.

Sign in / Sign up

Export Citation Format

Share Document