POLYAMIDE/POLYESTERAMIDE BASED NANOFIBERS

2011 ◽  
Vol 04 (04) ◽  
pp. 365-368 ◽  
Author(s):  
LENKA MALINOVÁ ◽  
VÁCLAVA BENEŠOVÁ ◽  
DANIELA LUBASOVÁ ◽  
LENKA MARTINOVÁ ◽  
JAN RODA ◽  
...  

The formation of novel high aspect ratio nanofibers from polyesteramides based on ε-caprolactam and ε-caprolactone is reported. Nanofibers were prepared by the electrospinning method from polymer solution. Scanning electron microscopy images of nanofiber layers revealed that the diameter of fibers depended on the nature of the solvent or the mixture of solvents used and especially on the composition of polyesteramides.

2008 ◽  
Vol 403 ◽  
pp. 97-98
Author(s):  
A. Kalemtas ◽  
Nurcan Calis Acikbas ◽  
Ferhat Kara ◽  
Hasan Mandal ◽  
Kristoffer Krnel ◽  
...  

In the present study, interactions between AlN and SiAlON laminated couples were investigated after gas pressure (GPS) and spark plasma sintering (SPS) by scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDX) with the aim to produce laminated composites. In the laminated couples sintered by GPS, a significant reaction zone (~100-150 μm), containing a high aspect ratio of elongated polytypoid grains, was observed at the interface. However, in the case of laminated couples sintered by SPS, a considerably thin reaction region (~2-3 μm) was observed, elongated polytypoid grain formations were also detected.


2021 ◽  
Vol 2086 (1) ◽  
pp. 012041
Author(s):  
A V Uvarov ◽  
A I Baranov ◽  
I A Morozov ◽  
D A Kudryashov ◽  
A A Maksimova ◽  
...  

Abstract This work is devoted to the study of the deposition of a-Si:H by the PECVD method in continuous and pulsed regime on test structures in the form of trenches with a high aspect ratio. The thicknesses of the layers obtained in these modes were investigated by the method of scanning electron microscopy. It was shown that the layers obtained in the pulsed mode, as compared with the continuous one, have better conformity.


2014 ◽  
Vol 633-634 ◽  
pp. 550-553 ◽  
Author(s):  
Qing Wang ◽  
Ya Hui Zhang

Sugarcane bagasse was used as start materials to extract nanocellulose fibers. The morphology was investigated by scanning electron microscopy. The result indicated that the nanocellulose is successfully extracted by a series of alkali and acid treatment. The nancellulose is characterized by nanowire structure, and possesses high aspect ratio.


2019 ◽  
Vol 29 (1) ◽  
pp. 1226-1234
Author(s):  
Safa Jida ◽  
Hassan Ouallal ◽  
Brahim Aksasse ◽  
Mohammed Ouanan ◽  
Mohamed El Amraoui ◽  
...  

Abstract This work intends to apprehend and emphasize the contribution of image-processing techniques and computer vision in the treatment of clay-based material known in Meknes region. One of the various characteristics used to describe clay in a qualitative manner is porosity, as it is considered one of the properties that with “kill or cure” effectiveness. For this purpose, we use scanning electron microscopy images, as they are considered the most powerful tool for characterising the quality of the microscopic pore structure of porous materials. We present various existing methods of segmentation, as we are interested only in pore regions. The results show good matching between physical estimation and Voronoi diagram-based porosity estimation.


Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 652
Author(s):  
Divine Sebastian ◽  
Chun-Wei Yao ◽  
Lutfun Nipa ◽  
Ian Lian ◽  
Gary Twu

In this work, a mechanically durable anticorrosion superhydrophobic coating is developed using a nanocomposite coating solution composed of silica nanoparticles and epoxy resin. The nanocomposite coating developed was tested for its superhydrophobic behavior using goniometry; surface morphology using scanning electron microscopy and atomic force microscopy; elemental composition using energy dispersive X-ray spectroscopy; corrosion resistance using atomic force microscopy; and potentiodynamic polarization measurements. The nanocomposite coating possesses hierarchical micro/nanostructures, according to the scanning electron microscopy images, and the presence of such structures was further confirmed by the atomic force microscopy images. The developed nanocomposite coating was found to be highly superhydrophobic as well as corrosion resistant, according to the results from static contact angle measurement and potentiodynamic polarization measurement, respectively. The abrasion resistance and mechanical durability of the nanocomposite coating were studied by abrasion tests, and the mechanical properties such as reduced modulus and Berkovich hardness were evaluated with the aid of nanoindentation tests.


2010 ◽  
Vol 192 (7) ◽  
pp. 1751-1760 ◽  
Author(s):  
Esther Julián ◽  
Mónica Roldán ◽  
Alejandro Sánchez-Chardi ◽  
Oihane Astola ◽  
Gemma Agustí ◽  
...  

ABSTRACT The aggregation of mycobacterial cells in a definite order, forming microscopic structures that resemble cords, is known as cord formation, or cording, and is considered a virulence factor in the M ycobacterium tuberculosis complex and the species M ycobacterium marinum. In the 1950s, cording was related to a trehalose dimycolate lipid that, consequently, was named the cord factor. However, modern techniques of microbial genetics have revealed that cording can be affected by mutations in genes not directly involved in trehalose dimycolate biosynthesis. Therefore, questions such as “How does mycobacterial cord formation occur?” and “Which molecular factors play a role in cord formation?” remain unanswered. At present, one of the problems in cording studies is the correct interpretation of cording morphology. Using optical microscopy, it is sometimes difficult to distinguish between cording and clumping, which is a general property of mycobacteria due to their hydrophobic surfaces. In this work, we provide a new way to visualize cords in great detail using scanning electron microscopy, and we show the first scanning electron microscopy images of the ultrastructure of mycobacterial cords, making this technique the ideal tool for cording studies. This technique has enabled us to affirm that nonpathogenic mycobacteria also form microscopic cords. Finally, we demonstrate that a strong correlation exists between microscopic cords, rough colonial morphology, and increased persistence of mycobacteria inside macrophages.


Sign in / Sign up

Export Citation Format

Share Document