Simulation of kinematic and workspace analysis of 3-PRS parallel manipulator

2015 ◽  
Vol 06 (01) ◽  
pp. 1550007 ◽  
Author(s):  
Y. D. Patel ◽  
P. M. George
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Advanced Technology ◽  
Effective Utilization ◽  
Closed Form Solutions ◽  
Current State ◽  
Kinematics Simulation ◽  
Complex Process ◽  
Workspace Analysis ◽  
Interior Singularity

In the present era, the competitive producers are forced to use maximally newer advanced technology and its effective fast implementation using various available tools for synthesis of new product requirement. Use of current state of art computer aided technology supports the creation of flexible assemblies and their built up though unified modular approach. The design of robotic mechanism is a complex process involving geometric, kinematic, singularity analyses during its synthesis phase. The present work is aimed at the effective utilization of CAx system Pro/Engineer tools for creation, ease in modification and analysis of spatial parallel manipulator. Three degrees of freedom of 3-PRS parallel manipulator is obtained using mobility analysis. Parallel manipulator with 3-DOF with 3-PRS configuration is investigated. The kinematics simulation of the robot is carried out using mechanism simulation and compared with closed form solutions. The concept of reachable, orientation and dexterous workspace is expressed. Tool tip coordinates obtained through simulation are plotted for workspace development. Inner and outer workspace boundaries are developed and analyzed for four different cases to understand the problem of interior singularity within workspace.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

Orientation Workspace Analysis of a Novel 3SPS+1PS Symmetrical Parallel Manipulator Based on Unit Quaternion

2011 ◽  
Vol 201-203 ◽  
pp. 1849-1853
Author(s):  
Jing Li Yu ◽  
Gang Cheng ◽  
Shuai Zhang ◽  
De Kun Zhang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Unit Quaternion ◽  
Structure Characteristics ◽  
Workspace Analysis ◽  
Moving Platform ◽  
Position And Orientation ◽  
4 Degrees Of Freedom ◽  
Orientation Workspace

For a novel 3SPS+1PS parallel manipulator with 4 degrees of freedom including three rotations and one translation, the formulae for solving the inverse kinematics equations are derived based on quaternion method. Unit quaternion is used to represent the position and orientation of moving platform, and the singularities caused by Euler angles are avoided. Combining the topological structure characteristics of the parallel manipulator, it only has three rotations when its moving platform is at a given translation position. Based on the inverse position/pose equations and the all the constraints of the parallel manipulator, the discrete algorithm for the orientation workspaces of 3SPS+1PS parallel manipulator where the moving platform is at some different given translation positions are designed. The research builds the theoretical basis for optimizing the orientation workspace with given position.

scholarly journals A Parallel Manipulator With Only Translational Degrees of Freedom

1996 ◽  
Author(s):  
Lung-Wen Tsai ◽  
Richard Stamper
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Translational Motion ◽  
Forward Kinematics ◽  
Closed Form Solutions ◽  
Real Solutions ◽  
Revolute Joints ◽  
Inverse Kinematics Problem ◽  
Three Degree Of Freedom

Abstract This paper presents a novel three degree of freedom parallel manipulator that employs only revolute joints and constrains the manipulator output to translational motion. Closed-form solutions are developed for both the inverse and forward kinematics. It is shown that the inverse kinematics problem has up to four real solutions, and the forward kinematics problem has up to 16 real solutions.

scholarly journals Morphological Synthesis and workspace design for a parallel manipulator with linear actuators

DYNA ◽  
2020 ◽  
Vol 87 (213) ◽  
pp. 129-139
Author(s):  
Carlos Andrés Mesa Montoya ◽  
Hector Fabio Quintero Riaza ◽  
Federico Gutiérrez Madrid
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Cylindrical Shape ◽  
Dimensional Synthesis ◽  
Workspace Analysis ◽  
Transmission Index ◽  
Linear Actuators ◽  
Condition Indices ◽  
Aided Design

This paper addresses the kinematic structure and workspace analysis of a parallel manipulator with linear actuators considering two studies.The first one was based on a morphological synthesis in which a kinematic connections approach was implemented. The set of combinations of joints and links for the desired system and their linkage are illustrated. Finally, the development regarding the conceivable morphologyis detailed, providing three linear degrees of freedom between the mobile and fixed platforms. The second study presented the dimensional synthesis of the manipulator, considering a workspace required and an input transmission index. The geometrical design was based on the maximum inscribed workspace volume; the cylindrical shape radius inscribed on a workspace intersection is also exemplified. The geometric determination of the workspace for the manipulator was demonstrated using computer-aided design. A design result of the Delta as checked with the stiffness and condition indices.

Dynamic modeling and power optimization of a 4RPSP+PS parallel flight simulator machine

Robotica ◽  
2021 ◽  
pp. 1-26
Author(s):  
Soheil Zarkandi
Keyword(s):  
Power Consumption ◽  
Dynamic Modeling ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Pareto Front ◽  
Essential Role ◽  
Power Optimization ◽  
Optimal Designs ◽  
Flight Simulator ◽  
Lagrange Method

Abstract Reducing consumed power of a robotic machine has an essential role in enhancing its energy efficiency and must be considered during its design process. This paper deals with dynamic modeling and power optimization of a four-degrees-of-freedom flight simulator machine. Simulator cabin of the machine has yaw, pitch, roll and heave motions produced by a 4RPSP+PS parallel manipulator (PM). Using the Euler–Lagrange method, a closed-form dynamic equation is derived for the 4RPSP+PS PM, and its power consumption is computed on the entire workspace. Then, a newly introduced optimization algorithm called multiobjective golden eagle optimizer is utilized to establish a Pareto front of optimal designs of the manipulator having a relatively larger workspace and lower power consumption. The results are verified through numerical examples.

Workspace, dexterity and dimensional optimization of microhexapod

2015 ◽  
Vol 35 (4) ◽  
pp. 341-347 ◽  
Author(s):  
E. Rouhani ◽  
M. J. Nategh
Keyword(s):  
Degrees Of Freedom ◽  
Optimization Problem ◽  
Screw Theory ◽  
Design Parameters ◽  
Dimensional Synthesis ◽  
Content Type ◽  
Workspace Analysis ◽  
The Difference ◽  
Flexure Joints ◽  
6 Degrees Of Freedom

Purpose – The purpose of this paper is to study the workspace and dexterity of a microhexapod which is a 6-degrees of freedom (DOF) parallel compliant manipulator, and also to investigate its dimensional synthesis to maximize the workspace and the global dexterity index at the same time. Microassembly is so essential in the current industry for manufacturing complicated structures. Most of the micromanipulators suffer from their restricted workspace because of using flexure joints compared to the conventional ones. In addition, the controllability of micromanipulators inside the whole workspace is very vital. Thus, it is very important to select the design parameters in a way that not only maximize the workspace but also its global dexterity index. Design/methodology/approach – Microassembly is so essential in the current industry for manufacturing complicated structures. Most of the micromanipulators suffer from their restricted workspace because of using flexure joints compared to the conventional ones. In addition, the controllability of micromanipulators inside the whole workspace is very vital. Thus, it is very important to select the design parameters in a way that not only maximize the workspace but also its global dexterity index. Findings – It has been shown that the proposed procedure for the workspace calculation can considerably speed the required calculations. The optimization results show that a converged-diverged configuration of pods and an increase in the difference between the moving and the stationary platforms’ radii cause the global dexterity index to increase and the workspace to decrease. Originality/value – The proposed algorithm for the workspace analysis is very important, especially when it is an objective function of an optimization problem based on the search method. In addition, using screw theory can simply construct the homogeneous Jacobian matrix. The proposed methodology can be used for any other micromanipulator.

Kinematics of a Fully-Decoupled Remote Center-of-Motion Parallel Manipulator for Minimally Invasive Surgery

2012 ◽  
Vol 6 (2) ◽  
Author(s):  
Chin-Hsing Kuo ◽  
Jian S. Dai
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Surgical Instruments ◽  
End Effector ◽  
Minimally Invasive Surgical ◽  
Inverse Kinematics Problem

A crucial design challenge in minimally invasive surgical (MIS) robots is the provision of a fully decoupled four degrees-of-freedom (4-DOF) remote center-of-motion (RCM) for surgical instruments. In this paper, we present a new parallel manipulator that can generate a 4-DOF RCM over its end-effector and these four DOFs are fully decoupled, i.e., each of them can be independently controlled by one corresponding actuated joint. First, we revisit the remote center-of-motion for MIS robots and introduce a projective displacement representation for coping with this special kinematics. Next, we present the proposed new parallel manipulator structure and study its geometry and motion decouplebility. Accordingly, we solve the inverse kinematics problem by taking the advantage of motion decouplebility. Then, via the screw system approach, we carry out the Jacobian analysis for the manipulator, by which the singular configurations are identified. Finally, we analyze the reachable and collision-free workspaces of the proposed manipulator and conclude the feasibility of this manipulator for the application in minimally invasive surgery.

Offline Programming for an Arc Welding Robot with Redundant DOF

2012 ◽  
Vol 184-185 ◽  
pp. 1623-1627 ◽  
Author(s):  
Huan Ming Chen ◽  
Zhou Ping Liu
Keyword(s):  
Arc Welding ◽  
Degrees Of Freedom ◽  
Motion Path ◽  
Welding Parameters ◽  
Programming System ◽  
Robot Controller ◽  
Offline Programming ◽  
Kinematics Simulation ◽  
Communication Module ◽  
Saddle Shape

To raise the programming efficiency of arc welding robots, the offline programming system was developed for a Motoman-UP20 robot with redundant degrees of freedom in VC++ integration environment. The system consists of kinematics analysis, motion simulation, welding trajectory plan, welding parameters plan and job file generating module. It can plan the motion path and posture of welding gun for saddle-shape seams, and display the workpiece on the interface synchronically. Job instructions can be made step by step, or generated automatically. Kinematics simulation module and communication module are integrated together, and job files can be exchanged between PC and robot controller via Ethernet to realize remote control.

Sign in / Sign up

Export Citation Format

Share Document